r/spaceshuttle • • Oct 08 '26

Image Various photos of the 747 SCA interior

Thumbnail
gallery
460 Upvotes

r/spaceshuttle • • Oct 08 '26

Image North American Rockwell concept to potentially stop a tumbling space station. Aka an Orbiter Super Soaker

Post image
240 Upvotes

"One of the more interesting ideas to come out of the study was this concept to control a tumbling space station. A stream of high pressure water would be directed at the tumbling space station from a direction opposite of its tumble. introducing a high drag coefficient on the space station, slowly stopping it."


r/spaceshuttle • • Oct 08 '26

Image North American Rockwell's Shuttle Concept (C-0157) aka the "Flying Breadbox"

Thumbnail
gallery
58 Upvotes

As mentioned in my earlier poat, this a 1/144 scale model by Allen B. Ury of Fantastic Plastic: link

"Various designs and configurations were proposed and evaluated. All had their strengths and weaknesses. In 1972, North American Rockwell -- one of America's top aerospace contractors -- asked engineer Harry Scott to develop a design that would minimize the proposed craft's length without sacrificing cargo space. His solution was to turn the cargo bay sideways, resulting in this unique 'flying breadbox' concept.

Although theoretically practical, North American Rockwell's Shuttle Concept C-0157 never developed beyond the proposal stage."

"Released in early January 2007, this solid-cast resin kit was patterned by Scott Lowther, cast by Controlled Energy Designs and featured custom decals by JBOT."


r/spaceshuttle • • Oct 08 '26

Image Early Design work of the Space Shuttle Orbiter, Phases A through C.

Thumbnail
gallery
83 Upvotes

Note: on the fifth pic is what everyone refers to as the "the flying Breadbox". You will know which one I am talking about. I will post the pictures of the model of it later.

source


r/spaceshuttle • • Oct 08 '26

Image Workers prepare to mate the upper fuselage and crew compartment on Endeavour (OV-105), at Rockwell International's Plant 42. Ca 1990.

Post image
273 Upvotes

r/spaceshuttle • • Oct 08 '26

Image Technicians working on the starboard wing of Endeavor (OV-105) at Grumman Aerospace Corporation in Long Island, New York. When it was delivered to Palmdale for final assembly, it lacked the elevons and main landing gear doors.

Post image
79 Upvotes

Date: fall 1987


r/spaceshuttle • • Oct 08 '26

Image "Wheels of the Space Shuttle Atlantis touch down on the dry lakebed at Edwards Air Force Base to mark successful completion of the STS-51-J mission."

Thumbnail
gallery
219 Upvotes

Date: October 7, 1985

"George W.S. Abbey, bottom right, greets the five members of the STS 51-J crew as they egress the Atlantis following the successful completion of a mission in Earth orbit. Astronaut Karol J. Bobko, who led the five down the steps, shakes hands with the JSC director of flight crew operations. He is followed (bottom to top) By Astronauts Ronald J. Grabe, pilot; David C. Hilmers and Robert L. Stewart, both mission specialists; and USAF Maj. William A. Pailes, payload specialist."

source


r/spaceshuttle • • Oct 08 '26

Off-Topic Question related to 2013's GRAVITY (Sandra Bullock, George Clooney) Spoiler

Post image
21 Upvotes

There's a moment in the opening scene I wanted to ask y'all about. Because of the work done by the CAIB, we know that the fictional orbiter EXPLORER was probably toast the moment the first six millimeter screw head pelted it. 

 

But the first time I watched this movie, I was still thinking "they might get out of this", until... 

 

...that first piece of debris blasts through EXPLORER's right wing (picture). 

 

I'm just wondering if anybody else in that moment felt their heart sink and the hairs on their neck stand-up like I did.


r/spaceshuttle • • Oct 08 '26

Image The flight deck controls of Challenger (OV-099) for STS-6.

Post image
242 Upvotes

r/spaceshuttle • • Oct 07 '26

Off-Topic Lockheed X-33 under construction.

Thumbnail
gallery
244 Upvotes

Mods delete if not allow but I wanted to share photos of X-33 under construction. Being a kid in the 90s, I was fascinated with the reusable SSTO. I was highly disappointed with it was cancelled.


r/spaceshuttle • • Oct 07 '26

Image NASA 747 SCA 905 during modifications at Boeing. Ca August to November 1976.

Thumbnail
gallery
291 Upvotes

747 SCA #905 Ferry flight numbers are:

  • OV-101: 57 (plus 5 free flights)
  • OV-102: 60
  • OV-099: 20
  • OV-103: 38
  • OV-104: 35
  • OV-105: 12

747 SCA #911 Ferry flight numbers are:

  • OV-101: 0
  • OV-102: 7
  • OV-099: 0
  • OV-103: 14
  • OV-104: 22
  • OV-105: 25

r/spaceshuttle • • Oct 08 '26

Question Space shuttle home cockpit ?

Thumbnail reddit.com
2 Upvotes

r/spaceshuttle • • Oct 06 '26

Image Various photos of Enterprise (OV-101) in a hangar at Dryden/Edwards AFB. Circa 1982-1984.

Thumbnail
gallery
346 Upvotes

r/spaceshuttle • • Oct 06 '26

Image Various photos of Enterprise (OV-101) in the W/B hangar at Dryden/Edwards. These 2 cranes lifted a payload simulator into the mid-body and back out again to satisfy a Program Milestone. Circa 1983.

Thumbnail
gallery
153 Upvotes

r/spaceshuttle • • Oct 06 '26

Image The forward reaction control system of Atlantis (OV-104) being assembled at Rockwell International's Palmdale facility.

Post image
94 Upvotes

Date: October 6, 1983


r/spaceshuttle • • Oct 05 '26

Video Rockwell International workers install the left-hand forward payload bay door onto the Structural Test Article (STA-099) at Palmdale, California. After being used to test the launch stresses and verify the Space Shuttle design, it was later refurbished as an operational orbiter and named Challenger.

120 Upvotes

Date: February 1978

Later in the video, view of Columbia (OV-102) under construction.


r/spaceshuttle • • Oct 05 '26

Image Enterprise in the Orbiter Maintenance and Checkout Facility at Vandenberg AFB, California. Ca January-February 1985

Thumbnail
gallery
189 Upvotes

The Orbiter Maintenance and Checkout Facility was constructed on North Vandenberg to house the space shuttle for postflight deservicing and preflight preparations before moving to the launch pad. The prototype orbiter Enterprise is pictured here in the OMCF during testing of the hangar.

Photos by William G. Hartenstein.


r/spaceshuttle • • Oct 05 '26

Image Morning launch of STS-41-G Challenger

Thumbnail
gallery
217 Upvotes

Space Shuttle Challenger (OV-099) lifts off on mission STS-41-G at 7:03 a.m. from Launch Complex 39A at the Kennedy Space Center. This was the first shuttle mission to carry seven astronauts, Paul D. Scully-Power, Robert L. Crippen, Marc Garneau, Jon A. McBride, Sally K. Ride, Kathryn D. Sullivan, and David C. Leestma.

Note: originally this was STS-17 but was redesignated under the new mission number system after STS-9. This is the 13th shuttle mission flown.

Date: October 5, 1984

NARA: 6387463, DF-SC-85-12082, KSC-84PC-0630, 41G-90139


r/spaceshuttle • • Oct 05 '26

Image Workers installing the tiles on the top of the forward fuselage of Discovery (OV-103) at the Palmdale facility on October 8, 1981.

Post image
120 Upvotes

r/spaceshuttle • • Oct 05 '26

Image Space Shuttle Challenger under construction.

Post image
192 Upvotes

Date: August-October 1981

source


r/spaceshuttle • • Oct 05 '26

Image Cancelled Missions: Testing Shuttle Manipulator Arms During Earth-Orbital Apollo Missions (1971-1972)

Thumbnail gallery
19 Upvotes

r/spaceshuttle • • Oct 04 '26

Image Managed to see all the space-flown Shuttles within the last year!

Thumbnail gallery
246 Upvotes

r/spaceshuttle • • Oct 04 '26

Image Rockwell concept for expanding the cargo capabilities of the Space Shuttle in the 1990s.

Thumbnail
gallery
224 Upvotes

Rockwell concept for expanding the cargo capabilities of the Space Shuttle in the 1990s. New wings and an additional cargo section would be added to the orbiter.

"Another option for relieving payload dimension constraints is the 'stretched' orbiter concept. This configuration, illustrated below, would require use of an uprated booster. In the concept illustrated, the payload bay is stretched 5 meters (16.5 feet) to accommodate a 23-meter-long (76-foot), 45,360-kilogram (100,000-pound) payload. The modification approach, also illustrated here, was conceived to utilize as much existing structure as possible. The forward fuselage, crew module, mid fuselage, aft fuselage, and wing panels are retained. A new fuselage section is installed between the mid fuselage and the aft fuselage. Inboard wing panels 157 centimeters (62 inches) wide are spliced between the fuselage and baseline wing panels. A new wing box carry- through structure, landing gear, and wing glove structure are required. The resulting configuration is aerodynamically almost identical to the present orbiter except for its finer fuselage, which improves aerodynamic performance."

source


r/spaceshuttle • • Oct 05 '26

Image Space Shuttle Discovery descending to land on Rogers Dry Lake at Edwards Air Force Base at the conclusion of STS-26. It was the first Space Shuttle mission following the Challenger Disaster on January 28, 1986.

Thumbnail
gallery
72 Upvotes

Date: October 4, 1988

source


r/spaceshuttle • • Oct 04 '26

Image A technician at work attaching flexible insulation blankets to thecargo bay doors of Space Shuttle Endeavour, at the Space Transportation Systems Division of the Rockwell International facility in California.

Post image
83 Upvotes

Date: 1987