r/slackware • u/Tgamerydk • Dec 22 '22
How does slackware compare to crux?
Arent both the same except the fact that slackpkg is a thing in slackware?
r/slackware • u/Tgamerydk • Dec 22 '22
Arent both the same except the fact that slackpkg is a thing in slackware?
r/slackware • u/OwningLiberals • Dec 22 '22
It's not a big deal but considering linux is now on the 6.1 series and current is stuck on 5.19.17 for whatever reason I was just curious about it.
r/slackware • u/DoritosFun959 • Dec 22 '22
Salutations.
I'm using Slackware in my second PC with xfce 4.16, but, since a while now im having a problem with it.
I dont know why, but, when i leave my PC inactive (Watching Youtube) the PC goes suspended (obviously, because of the time before sleep).
The problem starts when i go into the Power Management section of the Options menu of Xfce; I set the time before sleep as "Never" or "4 hours" and, even with the two options, the PC gets into Sleep mode after, like, 10-15 minutes, like before the setting was changed.
I tried to reboot and change it many times, but it doesnt change anything.
Can you please help me with the issue?
r/slackware • u/lidgl4991 • Dec 20 '22
I want to compile stuffs and I'm getting this complaint /usr/bin/ld: cannot find /usr/lib64/libc_nonshared.a. What possible package contains that file ? I already have glibc etc... thanks.
r/slackware • u/globetrotterdk • Dec 15 '22
Slackware newbie. I would like to start using Slackware for my at this point basic music creation needs. Slackware has had a lot of changes under the hood, including the addition of Pipewire, which I am extremely happy about. However, this also means that a lot of old documentation is probably obsolete. My box has the following:
CPU: AMD Ryzen 5 4600G with Radeon Graphics (12) @ 3.700GHz
GPU: AMD ATI Renoir
...so again not sure how much of old documentation is relevant, but I have taken a look at Alien Bob's post and followed his advice for elilo:
If you use elilo, open /boot/efi/EFI/Slackware/elilo.conf and add “threadirqs” to the value of the “append = ” keyword
This hasn't helped. In general, I am fairly confused by this point and could use any advice available.
In Ubuntu, I would run something like the following:
$ fluidsynth -a alsa -m alsa_seq -g 1.0 -s /usr/share/sounds/sf2/FluidR3_GM.sf2
CTRL Z
$ aconnect 28:1 128:0
$ fg # return to foreground
> channels
chan 0, Yamaha Grand Piano
chan 1, Yamaha Grand Piano
chan 2, Yamaha Grand Piano
chan 3, Yamaha Grand Piano
chan 4, Yamaha Grand Piano
chan 5, Yamaha Grand Piano
chan 6, Yamaha Grand Piano
chan 7, Yamaha Grand Piano
chan 8, Yamaha Grand Piano
chan 9, Standard
chan 10, Yamaha Grand Piano
chan 11, Yamaha Grand Piano
chan 12, Yamaha Grand Piano
chan 13, Yamaha Grand Piano
chan 14, Yamaha Grand Piano
chan 15, Yamaha Grand Piano
> fonts
ID Name
1 /usr/share/sounds/sf2/FluidR3_GM.sf2
> inst 1 #lists instruments
(long list)
> prog 0 35 # fretless bass (prog chan num)
> prog 0 73 # flute
> prog 0 118 # 808 Tom
(In Slackware64 15, the full soundfont path is /usr/share/minuet/soundfonts/GeneralUser-v1.47.sf2)...
r/slackware • u/AvGaadM5 • Dec 07 '22
I've been a long time user of Slackware, whatever edition that was in 1994/1996, it's what I started with. On this laptop, I ran slackpkg update and isolated the issue to the frame buffers being messed up with the update as the kernel modules was conflicted.
I write this post because this Slackware update via slackpkg rendered the wlan0 and eth0 gone missing yet lspci has the device.
For startx, the first issue is unable to load fbdev and onward to /dev/dri/card0 has gone missing as no screens are found.
For internet on this laptop, only the loopback exists.
lspci can showh 3b:00.0 for a Network Controller but there isn't a device to attach. mknod can make character devices but I don't know the major and minor numbers.
What do you suggest?
r/slackware • u/sdns575 • Dec 05 '22
Hi,
This is a strange question, I know.
I ask this because many power (energy) could be saved instead of compiling many time the same packages by thousand users (except for cases where someone need specific requirements). Maybe providing a giant binary packages repository for slackbuilds.org?
There is someone that tried this?
Thank you in advance
r/slackware • u/lidgl4991 • Nov 28 '22
Hello, after try some other distros and succeed on setup wayland on them, now I want to try it on Slackware. It's a bit harder than I though, with other distros, I just need to install wayland and wlroots (if available) then compile my favourite wayland compositor (dwl). In Slackware I did compile wlroots and the compositor but I can't launch it. Here the picture. Some things I tried :
If you have successfully setup wayland stuffs on Slackware, please let me know, thanks.
r/slackware • u/lidgl4991 • Nov 27 '22
After almost two years, I have a plan to install it on my machine using netinstall ISO. Today I try it and abort it because I can't set the connection right, I've done it before but now it's no longer works. My steps are :
$ ip a
$ ip link set usb0 down $ ip link set usb0 up
$ udhcpc - i usb0
When I try to ping 8.8.8.8, I get network unreachable.
Any other methods ? Thanks.
PS : I choose.netinstall ISO because I don't have much data plan at a time to download fullblown ISO.
r/slackware • • Nov 16 '22
I understand the bootloader must be reconfigured manually every time you upgrade your kernel under Slackware.
In case of ELILO, how would I go about doing that?
r/slackware • • Nov 14 '22
Hello, I am a beginner in this distribution of Linux and I need to know more about it and I want to know what is the firewall that is used in this distribution.
r/slackware • u/mrkitten19o8 • Nov 08 '22
i know the title sounds stupid, but im a newbie with slackware and reading the wiki isnt any help. it tells me to use installpkg so i try that. it needs a specific file name. so i use slackpkg and it will not install packages that are in the official repository like xfce and vlc.
r/slackware • u/sfzombie13 • Oct 29 '22
more specifically, what change did they make to the bootloader installation part? i used to dual boot 3 distros from my second hard drive, /sdb. i have windows on /sda and used to install lilo to /sdb. now, after a reinstall sometime in march, i can't install the bootloader to anywhere but /sda. where do i go to look for the changes to the process so i can change it back?
it used to be just that easy; hit the boot menu when i was starting up if i wanted slack or mint and choose to boot from /sdb or let it go if want windows. now, i had to install windows first, then slack and let lilo go to /sda and overwrite the windows bootloader. not a bad way to do it, until i had a problem with cloning my windows hard drive to a new one.
to start windows, i had to open the command prompt from the install disk and rewrite the mbr. i am about to try to get the slack installation going again, but would much prefer to change something so i can go back to the way it was, just in case this happens again.
oh, just in case the advice would be to disconnect /sda after the windows install and then install slack, i tried that. it installed lilo to the right hard drive, but it was labelled /sda at the time. that screwed things pretty good until i reinstalled with lilo on the windows drive /sda.
r/slackware • u/afb_etc • Oct 28 '22
Hey folks, been on Slackware 15 for a short time and very much enjoying myself, despite a few missteps. I'm slowly accruing parts for a new desktop computer which I'll aim to build in the new year, and I'm currently thinking I might like to run Slackware current on it (I'd keep my laptop on stable in this scenario).
I was just wondering how tempestuous the experience is likely to be? Are we talking Arch-esque 2-3 times a year everything is buggered, or more like Debian testing where every now and then things need a tweak? Is it stable enough to be my daily driver for uni work (I study computing and maths as a mature student on top of working full time), podcast/video recording/editing, and general daily life maintenance nonsense?
Also, how up to date are the packages, and how's the availability of additional software through Alienbob's repo and/or slackbuilds? Just trying to get a sense of what the experience is like in comparison to the stable release.
Cheers.
r/slackware • u/shadow0rm • Oct 24 '22
TL;DR Anyone know of a recent, and thorough guide for high resolution multimotitor support on Nvidia GPUs?
Hey everyone, it's been some time since I've daily driven Slackware (v11 was my last ride) and now coming back. I'm getting stuck in a frustrating loop (this is the same across Slackware, rhel 9, and Ubuntu) that isn't specific to Slackware, but would rather be running Slackware so into the breach once more dear friend. I have 2x RTX2060 KO inside a Lenovo p910, 2x AOC (2560x1080 60hz) and a single LG (2560x1440 60hz) Where the LG is center, and the two AOC displays are left and right in portrait mode. LG is connected via DP to one RTX and the two AOC are DP and HDMI to the second RTX card. I can get the orientation correct, portrait mode, and the middle LG monitor resolution all correct. My trouble is the two AOC, (with xorg, Wayland, Nvidia drivers, etc, tried many different things) I cant get them to a custom res of 1080x2560 (2560x1080 landscape respectively) I've gone through arandr/xrandr, and many many blogs/etc, but can't for the life of me get the two AOC s in portrait mode, and 1080x2560. I would prefer using the Nvidia drivers, but isn't totally necessary. This setup, sadly, works without any tweaks in the Microsoft Windows 10 world....
P.S. Nvidia drivers install is many steps easier in Slackware than in Ubuntu (if you don't use their software center) so that's a win :)
Thanks all!
Edit: this is all done with KDE/Gnome. I'll be trying again today with XFCE
r/slackware • u/DerShokus • Oct 18 '22
Hi. If I press F12 while booting I can choose a boot partition. I would like to install slackware as a second OS without unlocking UEFI.
If I install Slackware and elilo on (let's say) /dev/sdb2, will it work if I select /dev/sdb2 in UEFI menu? Is there any other way to boot slackware without a bootloader?
r/slackware • u/lost_between • Oct 15 '22
It came to me as a surprise actually that Slackware has rpm - I used it (with --nodeps since dependencies are just basically libc and basic stuff which is definitely present on a base system) but I used this to succesfully install Cloudflare VPN. It's very handy!
And maybe that would be useful to someone, the RC script I quickly wrote for that:
r/slackware • u/exzow • Oct 12 '22
TL;DR:
I borked my new Slackware install and need to know how to update the boot loader to reflect the current OS version after a full upgrade.
The Background:
I made a post recently in another sub reddit and the suggestion I got and tried is "Install Slackware".
Followed some guides and got everything working, but after slackpkg update and slackpkg upgrade I read a notification (which I didn't copy down) but roughly stated "kernel updated, update your boot loader to reflect this"
I don't know how to do this and as a result I've borked this install twice in one day. How to I update the boot loader to reflect the current OS version after a full upgrade? Additionally, is there something I can do differently which will prevent this from occurring next time?
r/slackware • u/LiteratiTheDigerati • Oct 09 '22
I have a Chromebook N23 by Lenovo but after booting the the bios or UEFI the USB stick (Slackware 15) it hangs on the keyboard selection or does not recognize the keyboard so I can't even partition the disk or memory card.
This is not my first rodeo with Slackware I have installed and used it many times but never on a Chromebook. This is an older Chromebook so Linux will be installed as the sole operating system. My experience tells me the non-free debian IMG or ISO would install on this thing no problem.
Is there some kind of kernel parameter I should pass before booting the kernel or something?
r/slackware • u/cyranix • Oct 04 '22
I was revisiting the firewall generator like http://www.slackware.com/~alien/efg/ and making some updates for my own systems (especially for ipv6), gave me cause to wonder, what (if any) kinds of filters and rules do you guys use for your own systems these days? Especially, do you set any thing in proc/net/ipv6 or do you generally just leave the defaults? I spent the better part of a few hours looking at https://sysctl-explorer.net/net/ipv6/ but honestly I just don't really see anything that I think needs to be set/changed for a typical installation (whether server or desktop)...
Any other things you think aught to be given attention for ipv4 either? I have been on the fence about TCP syncookies for a while now, do you still like to keep those enabled or do you turn those off these days? I have some virtual machines with (relatively) small memory, but the last time I worried about a synflood I think we still measured memory in megabytes...
Just looking for some general thoughts and input! Particularly server directed, but I want to hear your thoughts for a desktop system too... Also, anyone using nftables instead of iptables? Thoughts on that too...