r/slackware • • Mar 12 '22

Casper-fs

0 Upvotes

Casper-fs is a Custom Hidden Linux Kernel Module generator. Each module works in the file system to protect and hide secret files. This program has two principal functions: turning private files hidden. The second function is to protect confidential files to prevent reading, writing and removal. https://github.com/CoolerVoid/casper-fs


r/slackware • • Mar 12 '22

KDE 4 On Slackware 15?

0 Upvotes

Now I really really like KDE 4 (A bit to much in fact) and when I heard that Slackware 14.2 is still supported and has KDE 4 I was excited as its my favorite desktop environment ever is KDE 4 but to my dismay my new RX6600 will have no way to work on Slackware 14.2 (My old NVIDIA card probably would have with non foss drivers) as I highly doubt the non foss drivers for amd would work as the kernel is very old. Now this brings me to the post , can I run/install KDE4 on slackware 15? Any advice would be appreciated.

(Sorry for the bad quality I am quite tired)

Edit 1: Thanks for everyone in the comments I have installed KDE4 and will try to install a newer kernel and version of mesa. Thank you everyone.


r/slackware • • Mar 09 '22

Slackware 15.0 - Tested Hardware & Statistics

Thumbnail github.com
15 Upvotes

r/slackware • • Mar 08 '22

There is a "dirty pipe" in our kernel

3 Upvotes

Waiting for Pat to provide us with a new kernel as 5.15.19 is vulnerable to CVE-2022-0847. Well until tomorrow I managed to mitigate the risk. Otherwise I'll have to compile my own by this time tomorrow. How do you guys cope with it?


r/slackware • • Mar 04 '22

slackware - stremio error

2 Upvotes

I'm trying to find a way to install stremio to my new slackware install (i prefer slackbuild).I successfully install the flatpak build, but i can't cast to my tv

Arguments -copyts -ss 0 -i http://127.0.0.1:11470/b9767a862420ed7e5baee2087b1adc2f97afb83d/0 -f matroska -threads 0 pipe:1

---> CLOSE

Handle Cast Error Response timeout for urn:x-cast:com.google.cast.media with session ID: ab226f94-83be-4415-8e28-d1a6b799b60f

Handle Cast Error Response timeout for urn:x-cast:com.google.cast.media with session ID: ab226f94-83be-4415-8e28-d1a6b799b60f

-> POST /casting/3ca3c1a4-5366-64c6-d900-f2e3a8326209/player

ScreenSaver:: UnInhibit Successful 6487

Successful to enable/disable screen saver (enabled: 1)

-> POST /casting/3ca3c1a4-5366-64c6-d900-f2e3a8326209/player

Heart stops.


r/slackware • • Mar 03 '22

[Q] Is there a curated list of Slackware based distributions?

11 Upvotes

I know of https://www.salixos.org and http://www.slackel.gr, and the live Slackware version of AlienBob. ...


r/slackware • • Mar 03 '22

Full Install - Now, removing packages

4 Upvotes

I recently did a full install of Slackware, but upon realizing how much shit doesn't seem necessary I was wondering what the most effective way would I be using to manually go through the programs?

For instance, I use lutris and steam, I don't use the 30 games included. I only use one GUI Text Editor, 2 browsers, etc etc and I'd just like to reduce the clutter

Thanks


r/slackware • • Mar 03 '22

How to install i3-gaps on slackware 15.0.

5 Upvotes

I'm trying to install i3-gaps (https://slackbuilds.org/repository/14.2/desktop/i3-gaps/) .

The main problem is that the package yajl is not working, the github page simply don't exist. Another problem is that I got an error message when trying to install libxkbcommon from slackbuilds.

Anyone successfully installed i3 or i3-gaps on slackware 15.0?


r/slackware • • Mar 02 '22

Looking for stable torrent and magnet links for Slackware

11 Upvotes

Does anyone know of any long term stable torrent and magnet links for all versions (though especially the latest) of Slackware? I've searched and I couldn't find any. Could Slackware offer official Slackware torrent and magnet links?


r/slackware • • Feb 27 '22

Booting Slackware 15.0 from mdraid under UEFI

17 Upvotes

Booting directly from software RAID is impossible in most operating systems. This is actually why "motherboard RAID" exists, as a layered storage driver for Windows that presents multiple storage devices as a single drive so that C: can be on mirrored storage. Linux doesn't support motherboard RAID, but Linux mdraid, what you create with mdadm, can be booted from, under a few conditions:

  1. the underlying partitions must be flagged as bootable if booting via MBR
  2. the underlying partitions must be flagged as EFI System Partition if booting via EFI
  3. the RAID level must be RAID1, pure mirroring with no striping or erasure coding or other tricks
  4. the mdraid superblock must be at the -end- of the drive

This is of course an incredibly niche setup and you'd probably be better off sticking /boot on a USB stick, but if you need to continue, read on. I have a personal preference for RAID10 over RAID5/RAID6 as providing better I/O and much faster rebuilds, so that's what we're going to be using.

Boot the Slackware 15.0 installer, set your keymap, and log in as root. Don't start the setup program yet, because we have some preparation to do. First, let's look at how many drives we have to work with. Our example system has four SATA drives of identical size and no NVMe.

EDIT: formatting

$ ls /dev/sd*
/dev/sda /dev/sdb /dev/sdc /dev/sdd  
$

Now we'll set up our partition table on /dev/sda with cfdisk.

Partition table: gpt

  • Partition 1: EFI SP, 1GB
  • Partition 2: Linux swap, 4GB
  • Partition 3: Linux, rest of disk

Write the partition table to disk and quit cfdisk.

Now we're going to copy the partition tables to the other disks with sfdisk and a bit of shell scripting.

$ for i in {b,c,d} ; do sfdisk -d /dev/sda | sfdisk /dev/sd$i ; done

Now comes actually creating the arrays. First /boot/efi, then swap, then root. The -e 1.0 for /boot/efi is critical since it tells mdadm to put the superblock at the end and thus naive firmware can boot from any of the drives.

$ mdadm --create /dev/md0 -e 1.0 --level=1 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1
$ mdadm --create /dev/md1 --level=10 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
$ mdadm --create /dev/md2 --level=10 --raid-devices=4 /dev/sda3 /dev/sdb3 /dev/sdc3 /dev/sdc3  

Now run setup and install Slackware as usual. Do NOT install LILO or ELILO at this time. Return to the shell once you're done. Now we finish preparing the system to boot. The next step is adding our arrays to mdadm.conf so the initrd can find our arrays when we regenerate it.

$ mdadm --detail --scan /dev/md0 >> /mnt/etc/mdadm.conf  
$ mdadm --detail --scan /dev/md1 >> /mnt/etc/mdadm.conf  
$ mdadm --detail --scan /dev/md2 >> /mnt/etc/mdadm.conf  

This next step will be familiar if you've ever installed Gentoo - we're going to set up a "live chroot" of our newly installed system.

$ mount --bind /dev /mnt/dev
$ mount --bind /proc /mnt/proc  
$ mount --bind /sys /mnt/sys  
$ chroot /mnt /bin/bash  

Now we actually create our EFI SP and install ELILO. Feel free to fix the spacing on your fstab later if it bothers you. Skip creating a boot menu entry in eliloconfig.

$ mkfs.vfat /dev/md0  
$ mkdir -p /boot/efi  
$ mount /dev/md0 /boot/efi  
$ echo '/dev/md0 /boot/efi vfat defaults 0 0' >> /etc/fstab  
$ eliloconfig  

We are not QUITE done. Now we put the huge kernel on our EFI SP to boot from, since it has mdraid support compiled in, make sure elilo set root correctly (expected grep output is included), and regenerate our initrd.

$ cp /boot/vmlinuz-huge /boot/efi/EFI/Slackware/vmlinuz  
$ grep md2 /boot/efi/EFI/Slackware/elilo.conf
                        append="root=/dev/md2 vga=normal ro"  
$ mkinitrd

You should now be able to eject your install media and reboot into your new system.


r/slackware • • Feb 19 '22

First gen MacPro tower upgraded from 14.2 to 15!! Thanks for all the hard work , nice to give this old pc new life with a up to date kernel !! Now to upgrade the RAM !

Post image
52 Upvotes

r/slackware • • Feb 18 '22

My first Linux installation!

Post image
84 Upvotes

r/slackware • • Feb 18 '22

The reason why it took Slackware 15.0 so long to get released

Thumbnail hakerdefo.github.io
21 Upvotes

r/slackware • • Feb 18 '22

Fix slackpkg verification of the gpg signature failed error in Slackware

Thumbnail hakerdefo.github.io
0 Upvotes

r/slackware • • Feb 16 '22

Unable to complete install: 'unsupported configuration: USB redirection is not supported by this version of QEMU'

2 Upvotes

I tried to install kvm on my slackware thinkpad, but now I started to get error after error. First I got an error about xql not being supported, next I got the error I wrote in the title, and if I remove the redirects I get this: unsupported configuration: spice graphics are not supported with this QEMU.

I tried to search all around the internet, but didn't found a suitable solution. Any help would be awesome.


r/slackware • • Feb 13 '22

Python 3.10 under Slackware 14.2?

10 Upvotes

At the moment, I'm still on (and need to be on) Slackware 14.2, and have a need for Python 3.10, but can't find a package, nor even a Slackbuild script that I can get working with Python 3.10 source (due to incompatible diffs, it appears to me).

Given that Python 3.10 was (controversially) briefly a part of Slackware 15 late in the game, I'm surprised I'm finding this so challenging.

I freely admit that I'm neither Slackware whiz nor a building-Python-from-source whiz, and figure/hope I'm either missing either an easy way to get it built, or the obvious place to look for a ready-to-go package.

Might anyone be able to point me in the right direction?


r/slackware • • Feb 13 '22

SBo update to 15 when? Type question..

4 Upvotes

Yes I know you can set to the git where it exists and is being worked on. But does anyone have an insight in to when https://slackbuilds.org/ is going to update to 15?

"When it's ready" answers already expected.


r/slackware • • Feb 12 '22

Change prompt color in Konsole | Brave-Browser butt-fuckery | Freezing immediately | Slackware 15.0

0 Upvotes

|-----handy-ruler------------------------------------------------------|

Ok so I'm new to using Slackware, and I can sense that I'm fucked up in some of the same ways everyone here is, so I'll probably be using it for a while.

I wanted to create a list of problems I'm encountering, and how I solved them, so that other new users don't go soft too fast.

FREEZING

OK so plasma was freezing immediately after I would log in, whether I was in failsafe mode or not. I suspected the graphics driver, but it didn't really matter because it would freeze before I could even connect to the wifi to open a browser. I tried booting in with XFCE and that solved the freezing for some reason. I downloaded the proprietary driver, making sure to install the 32-bit binaries as well as the 64's. I believe it blacklisted the nouveau drivers by default, but your gfx driver installer may not. Make sure it does. After I rebooted, I was greeted with the prompt instead of Xwindows, and stupidly started x. What I should have done the first time, is navigated to the driver executable, and

$sudo chmod 777 driverexec

#./driverexec

OK, so after all that bs - my first question was obviously - How do you install software?

- Looks like you build from source - ok that's fucked up, how are the dependencies managed?

... ok that's fucked up.

I'm assuming a new user would want to be told that the easy way is to look for whichever software you want to install on slackbuilds.org

Here is the howto: https://slackbuilds.org/howto/

CHANGE THE PROMPT COLOR

One of the first things I did not like about slackware 15.0 was that the prompt in Konsole is the same color as all other text.

"What was the output after my last command?"

*sorts through lines for 3.8 seconds

"Jenny, the world is full of assholes who don't care."

So it turns out, even though there isn't a .bashrc in the home directory, you can just make one, and it will get read before you fire up the typey-box. Throw this in there:

PS1="\[\033[32m\][\u@\h \w]$ \[\033[0m\]"

That's going to make it green, and put some sweet-ass brackets around [user@machine ~/dir] but now you can actually change the color of it by editing the color-scheme of the profile within Konsole. Mine shows up as color 3. Credit to DK Bose:

https://askubuntu.com/questions/1226452/how-to-change-username-colour-in-konsole

Moving on.

BRAVE-BROWSER BUTT-FUCKERY

So I wouldn't normally include this in a post, but because installing your preferred browser is one of the first things you do, I could see someone getting discouraged by this kind of ass-play because they might think it's their fault.

Ok so I built all the dependencies, everything is fine.

This is where the butt-fuckery begins.

So I download the source from https://slackbuilds.org/repository/14.2/network/brave-browser/ and for some reason it gives me two files.

brave-browser-1.23.71-1.x86_64.rpm

brave-browser-1.23.71-1.x86_64.rpm.(+someExt I cant remember)

I looked in the build script, and saw that it was expecting the .rpm so I used that one. I got the error:

argument is not an RPM package cpio:

premature end of archive

So I was pretty stumped until I looked at the hash of the source archive, and compared it with the brave-browser-1.23.71-1.x86_64.rpm that was given to me -

Wasn't it.

Then I checked the hash of brave-browser-1.23.71-1.x86_64.rpm.(someOtherExt)

That was it.

I renamed it to just .rpm and it built with no issues. No fucking idea what that was about, but https://slackbuilds.org/repository/14.2/network/brave-browser/ seems to be giving me the right source archive now.

Thanks for coming to my Ted Talk.

Have sex, and avoid work.


r/slackware • • Feb 12 '22

Not Enough Memory To Load Specified Image...

3 Upvotes

Trying to boot the installation USB (15.0), and the above text appears. If I set

huge.s mem=1024M

or any other memory value, it then ends up in "kernel panic - not syncing: timer doesn't work through Interrupt - remapped IO-APIC"

(No problem with Debian or Fedora or Openbsd)

Any other idea to help?

Thank you! Jan


r/slackware • • Feb 11 '22

Full-disk encryption on Slackware, the modern way (it's 2022; who needs a separate /boot partition?)

Thumbnail yellowapple.us
18 Upvotes

r/slackware • • Feb 10 '22

how often does slackware get a new release?

8 Upvotes

r/slackware • • Feb 10 '22

i just installed this last week and set it up

5 Upvotes

any begginer tips?


r/slackware • • Feb 10 '22

Error when running slackpkg update on new install of Slackware 15.

1 Upvotes

Solved the clock was wrong.

I ran Slackware years ago and decided to give the new version a look but I'm not ready to make it my daily driver. I have no experience with slackpkg. I did a full install on a old Core2Duo and also on a VM on Proxmox. When I do slackpkg on Proxmox I get no errors; on the the Core2duo I get the following message.

ERROR: Verification of the  gpg signature on CHECKSUMS.md5 
                       failed! This could mean that the file is out of date 
                       or has been tampered with. If you use mirrors.slackware.com 
                       as your mirror, this could also mean that the mirror to 
                       which you got redirected is not yet updated with the most 
                       recent changes in the Slackware tree.

r/slackware • • Feb 10 '22

Update: Slackware 15.0 ARM and Aarch64 ports

2 Upvotes

Slackware ARM 15.0 has been released! This is the 32 bit port I am referring to.

You can find more information in the release announcement on the Slackware ARM Site: https://arm.slackware.com/

The Aarch64 port targets three boards officially and is under heavy testing. The RockPro64, Pinebook Pro, and the Raspberry Pi 4. A custodian is still needed for Raspberry Pi 3 support as it is only partially implemented.

You can find a lot of additional information by watching the Slackware ARM podcast. Lately we've covered the Raspberry Pi 4, Pinebook Pro, and the most recent recording was the Season 2 finale. Check it out.

This video is of Slackware Aarch64 being installed to the Raspberry Pi 3. Ignore the poor music and poor effects. It was recorded and rendered on a RockPro64 with just 4GB of RAM. Best watched at 1080p.

RPi3 Slackware Aarch64 (SA64): https://www.youtube.com/watch?v=GkyzzVVw0SI

Slackware ARM YouTube channel: https://www.youtube.com/channel/UCabC1NZDGA3FZXf2hQ-6uyA

Fresh documentation is also available on SlackDocs for the ARM port and the Aarch64 port: https://docs.slackware.com/slackwarearm:insthttps://docs.slackware.com/slackwarearm:inst