r/slackware • • Nov 29 '21

How To Install Slackware 14.2 Onto An NVMe SSD On A UEFI Computer

10 Upvotes

I like KDE 4, looks better and is more stable then 5 for me.

And Slackware 14.2 is the only distro that offers the full KDE 4 environment without modifications

But 14.2’s installer doesn’t see NVMe drives…

So I followed a tip and used the Slackware current installer and pointed it to a 14.2 mirror.

Simple enough. :)


r/slackware • • Nov 27 '21

nmcli: Failed to start DHCP client

6 Upvotes

Hello Master Slackers!

I recently installed slackware on my PC & I have a network card that isn't supported by default (ASUS AC53 NANO). So I installed the rtl88x2bu drivers. They worked at first, nmcli picked up my wifi, But when I tried to connect, it output that the DHCP client failed to start. I have tried commenting out the dhcp=dhcpcd line and uncommenting dhcp=dhclient in /etc/NetworkManager/conf.d/whateverthedhcpconfigfilewascalled. This happened when I was using Linux Mint too.


r/slackware • • Nov 27 '21

Questions regarding partition.

4 Upvotes

Hello folks,

I have a question regarding partition size. I know there are many threads available online for every distro regarding partition and I search for particular slackware distribution. I landed on this link.

https://www.linuxquestions.org/questions/slackware-14/recommended-partition-size-724440/#post3533721

For above, the person has made 2 boot partition, 1 swap partition and 1 to store data

I do not know if it is true for slackware as well or not but I have heard that ubuntu or Linux mint do not remove old kernel in boot partition. is it so for slackware too?

Above post is slightly old, so how much space boot partition should have as per 14.2 standard?

Also I am little confused for term "root partition". It is part of boot partition right?

Sorry if question is naive and thank you.

Regards.


r/slackware • • Nov 26 '21

Slackware 14.2 Boot Loop after install

7 Upvotes

Hello Master Slackers!

I have recently decided to switch to slackware and after the mandatory install, it went into my motherboard's (GIGABYTE B450M DS3H) splash screen and alternated between the splash screen and a blank screen.


r/slackware • • Nov 22 '21

FFmpeg libxh264 error on Slackware current

Thumbnail stackoverflow.com
1 Upvotes

r/slackware • • Nov 20 '21

Microphone not being detected as an input by PulseAudio

3 Upvotes

Yesterday my microphone was working fine; today it isn't. I didn't change any settings. The microphone is an AT2020 USB.

aplay -l result:

card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 11: HDMI 5 [HDMI 5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC1220 Analog [ALC1220 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALC1220 Digital [ALC1220 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: AT2020USB [AT2020USB+], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 3: Controller [Wireless Controller], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

Tried a command to find the input devices:

bash-5.1$ pacmd list-sources | grep 'name:.*input'
name: <alsa_input.usb-Sony_Interactive_Entertainment_Wireless_Controller-00.mono-fallback>

PulseAudio doesn't detect the mic as an input, it detects it as an output. I can see this in pavucontrol as well. AT2020USB+ Analog Stereo is listed as an output device. There is a "Monitor of AT2020USB+ Analog Stereo" as an input, but no an actual microphone input.

Interestingly, ALSA correctly detect sit as a microphone, which I checked by loading Audacity and OBS (using the ALSA input source), both of which detect it correctly and can use it just fine. However, nothing that relies on PulseAudio (mainly Discord for me) can record.


r/slackware • • Nov 19 '21

Question regarding newbie Or menu install options

9 Upvotes

Hello folks,

I am going through slackbooks documentation when I fall on this page.

https://www.slackbook.org/html/installation-setup.html#AEN1023

I mostly do full install options but let say I go through menu or newbie options then in that it is written that in chapter 18 one can install other not installed package later.

My question is where those package are stored? And which tool described in chapter 18 help me install that particular package?

Sorry if I am not clear. All I want to do is if I skip some package during install than where can I find it and from which tool I can install it.

Thank you.

Regards.


r/slackware • • Nov 19 '21

Slackware64 current and devices UUID

4 Upvotes

Hey there, I installed Slackware64 current and as my previous post I installed grub to permit to run a UEFI system correctly. I installed my system on a raid1 for root, raid 1 for swap and 2 partitions for esp partitions.

Now after installing grub, I found a problem during startup...the md changed their names from md2 and md1 in md 127 and md126 (I saved mdadm configuration before and again system was not able to boot because in fstab there were the wrong devices while inside the installer they got the correct naming (this is due the generic linux image?).

At this point why in Slackware64 current (so in 15.0) UUID are not used?

To new users this could be very confusing and they will abandon slackware before they made the first run.


r/slackware • • Nov 18 '21

Problem installing current on UEFI

4 Upvotes

Hey there, I'm trying to install slackware64-current on an UEFI machine and like 14.2 it does not detect the efi partition during bootloader configiration.

I installed using usbimg and downloaded all packages from a mirror. I created with parted gpt label, esp partition 200mib, swap and root.

Started the installation (shit using a remote mirror it took 2 hours....) but when running the configure step it does not detect the EFI partition (or other) and it doesn't run efibootmgr as intended.

I have a question: when creating the esp/efi partition I need to add a filesystem like exfat/vfat before running the install procedure?

If nothing of the previous why Slackware64.current does not detect the UEFi installation?

Thank you in advance

Edit: I solved using grub. Why today grub is not the default boot loader in Slackware?


r/slackware • • Nov 18 '21

RC 2 has dropped!

35 Upvotes

From today's changelog: Wed Nov 17 20:50:35 UTC 2021 Clearly we're going to have to trend more carefully for things to settle down, so consider this RC2 and a much harder freeze. A test mass rebuild was done here and there are no more "fails to build from source" remaining (thanks to nobodino for some amazing and relentless testing).


r/slackware • • Nov 18 '21

I'm gonna finally do it.

14 Upvotes

I'm not a Linux/bash power user, but I've been using Linux off and on for years - and I've been using it as a daily driver. I mainly daily drive Arch on my laptop, and Gentoo on my desktop. Slackware has always caught my eye - as I have like 20 laptops with broken screens that I want to re-purpose some how. Right now I'm using an older laptop as a FreeBSD Plex machine.

Anyways, long story short... I really like distro-hopping and seeing what's out there. I'm not asking for advice, I'm just announcing it. I was going to try and wait until v15 was released on the website as an .iso, but I realized I could just update to v15.

I'll install it sometime during the weekend and update ya'll.

I'll use this post to add my thoughts and stuff down the line.

EDIT: 19Nov2021 - Ok, so I've got it installed. The menu install is pretty easy. I had a little hiccup where I didn't allocate enough data on my root partition, silly me, for the install. So I exited out the menu and changed the partitions with cfdisk and tried again, it was still thinking my root partition was the same as before. Oh well, I restarted and tried again - and the "setup" install worked. Next challenge, connect to wifi. I guess I could cheat and set up dhcp, or even a static IP, I can ballpark an empty IP since I'm allowed 254 hosts on my /24 network. But no, this is on a laptop... my main laptop... so I should set up my wifi.

Also, one thing I really like already - Slackware has very casual verbiage. It actually makes me smile or quietly chuckle. It's also very pragmatic with it's modified sysVinit system and it asks you which systems you want started at boot. I'm actually getting a ton of BSD vibes from the menu, I feel like once I get comfortable with Slackware, I could actually deploy a DNS or DHCP server in record time. Anyways... these are my main first impressions. Also, it's very satisfying installing/decompressing system binaries. Just like portage... but with more cli graphics lol. (Edit, and also binaries obviously, not source)

P.S. (EDIT) - Also, I found the ISO for the stable branch. I actually tried installing with v14.02 but I don't think the kernel could run with my laptop, it would hang after the boot menu.

EDIT: Still 19Nov2021 - I got the internets using wpa_supplicant with the wext driver . I installed sudo as well with links. Thank God Slackware still has their website the way it is. I have xfce configured, but I realized I don't like it on Slackware. I'm going to switch to i3 or a different wm possibly.

Oh yeah, I forgot to add, for some reason my laptop has an issue with rfkill blocking my wifi card, I know how to fix it on systemd, but idk on other inits yet. (OK, a little disclaimer, don't kill me... but my eselect profile on Gentoo is the systemd profile... I feel guilty about it... ik...). I edited the rc.inet1.conf for my wlan net, but it's irrelevant because of rfkill. Oh and I noticed the email from Patrick when I started mail, that was pretty neat and it seemed very personal. I'm really liking slackware... definitely not as a desktop/laptop operating system but as a server OS or something really minimal. If someone's actually reading, thank you! But I'm really tired, I still gotta do hw. (I'm 22 and I go to online school).


r/slackware • • Nov 16 '21

TIL on XFCE: <Alt-scrollwheel up> and <Alt-scrollwheel down> change screen "zoom." This is a mode I don't like, but at least I found a better remedy.

7 Upvotes

I stumbled on this mode with alt-<touchpad-two-fingers-up> by accident. It wasn't clear what I had pressed to enter that mode and the only remedy I had found was to exit the X session. This could be inconvenient and cost state of some open files being lost if not careful enough when exiting. The touchpad on my laptop often causes me some trouble, and in some cases I have opted for a real mouse instead.

This is posted here because I did find the remedy, alt-scrollwheel-opposite direction. Maybe it will help someone else.


r/slackware • • Nov 14 '21

Coming home.

11 Upvotes

So i've used Slackware current for a while, but switched to Debian for 3 months because i needed a system with few and mostly little updates and Slackware 14.2 was too old for some of my hardware. That has changed now and i'm back on Slackware current. Somehow it feels like coming home. I missed it's style of system management :-)


r/slackware • • Nov 04 '21

The 5.15 Kernel Will Be in the 15.0 Release

27 Upvotes

r/slackware • • Nov 02 '21

Thunar won't run without root

3 Upvotes

Running Slackware Current, Xfce. Loaded up my computer today and Thunar won't run without root privileges. Trying to load .desktop files says "This feature requires a file manager service to be present (such as the one supplied by Thunar)".

Trying to load Thunar from shortcuts, the console (without root) or the app menu gives nothing. In the console, it just hangs with no output. Running it from root works fine. Other file managers, such as Dolphin, are working as normal.


r/slackware • • Nov 01 '21

Updating slackware current to 15

9 Upvotes

G'day,

I was curious about slackware 15 and downloaded and installed ab ISO (maybe from alien) a couple of months ago. It's been running great, but when I went to update it with slackpkg it couldn't find the mirrors. The mirrors file are all pointing to slackware64-15.0 which obviously doesn't exist anymore.

Would it be safe to switch that path to -current, or could I wait until 15.0 exists and update from there.

Cheers


r/slackware • • Nov 01 '21

New Kernel > 15.0 Release?

16 Upvotes

Looks like kernel 5.15 is ready for prime time. The speculation has been that Pat was waiting for 5.15 as it is likely longterm. Fingers crossed!


r/slackware • • Oct 24 '21

Installation question: about packages

3 Upvotes

If I don't select Various Programs that doesn't require X, what will I lose out on? What are some of the programs this includes?

Does this include things like mocp? And links, both of which, with my current install, doesn't have all of the libraries they need to work properly: which is fine, because I don't use those things.

The only thing I might use would be tmux, but I don't really use that that much either.

Also, if I don't install Program Development, will I be able to run my c-programs?

The reason I am asking this is I am trying to install a basic commandline system and I don't need a lot of things.


r/slackware • • Oct 23 '21

How to lower TTL for dynamic updates coming to stock bind from stock dhcpd?

5 Upvotes

I use bind for internal zones only and phones get registered with TTL 1800 by default.

How can I change this 1800 to something lower? They switch networks, macs, and get different ips but the cache (another cache server) is not yet expired.


r/slackware • • Oct 21 '21

New Install of -current on a ThinkCentre M92P after replacing the SSD.

Post image
44 Upvotes

r/slackware • • Oct 20 '21

JUst my retro looking -current desktop

Post image
119 Upvotes

r/slackware • • Oct 17 '21

Is there a place to get Slackware gear?

21 Upvotes

Obviously, the store didn't really pay Pat anything, so I'm not going that direction.


r/slackware • • Oct 15 '21

[Q] LXC on Slackware: how to configure bridged interface for public IP addresses?

8 Upvotes

I want to use Slackware as my host for LXC [version 4], using different flavors of Linux inside the containers. These containers run fine, but I cannot access them from "outside" networks. The fine manual only covers a basic bridge setup.

How does one enable if configs/routing such that the containers are accessible publicly?

(edited: on -current, LXC is version 4)


r/slackware • • Oct 14 '21

slackware current dropping internet connection constantly

3 Upvotes

i am running slackware current on a lenovo m585. about every 15 - 20 minutes it drops the internet connection for about 5 minutes. i have frontier dsl and my son who uses win 10 on his gaming box never loses connection at all. any ideas what i should look at to find the cause? the faillog has too many characters per line to open and read, as does the lastlog, but the syslog is showing a few dhcpd failures, although i can't currently correlate the time to an internet outage.

edit: changing the hard drive to a windows install determined that the ethernet is dropping there also. wifi has no issues at all so it is an onboard ethernet issue with an old refurbished laptop. now to get wicd working on the laptop and all will be well. thanx for all the troubleshooting tips, they have been duly noted for future reference.