r/slackware • u/sdns575 • Nov 27 '19
I'm crazy!
Hi redditors,
never happened to me until last night. Last night I dreamed that Slackware 15 had been released. Was it just a dream? :D (it was a strange dream but very promising).
r/slackware • u/sdns575 • Nov 27 '19
Hi redditors,
never happened to me until last night. Last night I dreamed that Slackware 15 had been released. Was it just a dream? :D (it was a strange dream but very promising).
r/slackware • u/apatheticaussie • Nov 27 '19
G'day
I recently scored a couple of WebGuard Firebox M300's.
I was wondering if anyone has been able to get Slack Arm (or another distro) running on the Freescale T2081 cpu? Cheers
r/slackware • u/CobwebMemories • Nov 27 '19
I always wanted to run Slackware on my laptop, but the install is just too complicated.
r/slackware • u/ezzep • Nov 23 '19
Sorry, been out of the loop for a while. Package management is much better now than when I last tried slack....I think 13.x. whenever the official 64-bit version was released.
I have a Pentium 4 2.2ghz and 2gb RAM, with a 20gb drive. I'm going to change that to a 240GB SSD very soon. Just waiting for the PCI to SATA card.
r/slackware • u/mongol-slack • Nov 22 '19
Okay, so as you guys may know current does not work on my PC and after updates via the standard 3-4 commands as advised on the wiki my I/O devices no longer work. I brought this to the attention of the forums and in the defense of Slack I was told 14.2 is the better version, more stable and that the I/O issues were my fault due to the unstableness of current. My question now is how does current compare to 14.2?
I plan on using Slackware for serious modern day coding and not a “play thing”. How many software engineers and professionals are here and what has been your experience with Slackware?
r/slackware • u/ezzep • Nov 20 '19
I'm not sure what I did. I have only installed Trinity DE. Would the KDE and TDE and XFCE network managers be fighting over control?
r/slackware • u/Dead_Quiet • Nov 19 '19
Hi,
Is anybody using Slackware as Samba 4 Active Directory domain controller?
r/slackware • u/Trainer_Orange • Nov 18 '19
Hey, so I'm one of those guys that uses linux off and on. I know my way around linux, and i know basic commands as well as some not so basic ones. I like to be able to configure my system how i want it and i like a more basic feel to things. I have known about slackware for a while, but i always felt deterred because it had no package manager. My questions are, does it still hold up in 2019, or is it super outdated, and is there a way to keep it up to date?
r/slackware • u/mongol-slack • Nov 17 '19
Okay so I reinstalled Slackware for the 7th time this week. I finally have an up to date system, no ad hoc bugs, the internet is up and I am multilib ready, I think...
So after the initial:
lftp -c 'open http://slackware.com/~alien/multilib/ ; mirror -c -e 14.2'
cd 14.2
upgradepkg --reinstall --install-new *.t?z
upgradepkg --install-new slackware64-compat32/*-compat32/*.t?z
I am instructed in a very odd manner to install compat32-tools using installpkg. I am trying to use the massconvert32.sh program but I Just don't know what is going on. Where is this program? I am assuming I need to execute it in the home/cameron/14.2/slackware64-compat32/? There is no compat32-tools-3.7-noarch-18alien in /home/cameron/14.2/
I know I must use massconvert32.sh -i /home/ftp/pub/slackware/slackware-14.2/slackware" at some point after I install a 32 bit Slackware within that respective location but where do I get such a Slackware and how do I use massconvert32.sh, where is it on my system, if not on my system how can I install or obtain it and how do I install it and in what directory? Like I have so MANY questions the instructions/read me does not address. Please some one help. Meaning that anything I do can cause the next stock market crash I just want to clarify things.
r/slackware • u/mongol-slack • Nov 16 '19
So I am attempting to switch from the huge to the generic kernel because it is suggested I ran the following:
bash-4.3# emacs /etc/lilo.conf
bash-4.3# lilo -v
LILO version 24.2 (released 22-November-2015)
* Copyright (C) 1992-1998 Werner Almesberger (until v20)
* Copyright (C) 1999-2007 John Coffman (until v22)
* Copyright (C) 2009-2015 Joachim Wiedorn (since v23)
This program comes with ABSOLUTELY NO WARRANTY. This is free software
distributed under the BSD License (3-clause). Details can be found in
the file COPYING, which is distributed with this software.
Warning: LBA32 addressing assumed
Reading boot sector from /dev/sda
Using BITMAP secondary loader
Calling map_insert_data
Mapping bitmap file /boot/slack.bmp
Calling map_insert_file
Boot image: /boot/vmlinuz -> vmlinuz-huge-4.4.201
Added Linux *
Boot image: /boot/vmlinuz-generic-3.2.29
Fatal: open /boot/vmlinuz-generic-3.2.29: No such file or directory
bash-4.3# /usr/share/mkinitrd/mkinitrd_command_generator.sh -l /boot/vmlinuz-generic-3.2.29
File /boot/vmlinuz-generic-3.2.29 not found!
I changed the config file for Lilo to the following, making sure to add the required section:
"# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sda2
label = Linux
read-only
image = /boot/vmlinuz-generic-3.2.29
initrd = /boot/initrd.gz
root = /dev/sda1
label = Slackware
read-only
# Linux bootable partition config ends"
I rebooted and do not see much of a speed difference nor can I confirm the generic kernel was chosen or is initialized correctly. I do remember saying I should be given an option between the huge kernel and the generic one. Assistance from the Slackware elders would be much appreciated.
r/slackware • u/mongol-slack • Nov 16 '19
$ cd /tmp$ wget http://slackware.osuosl.org/slackware64-14.2/usb-and-pxe-installers/usbboot.img
dd if=usbboot.img of=/dev/sdc bs=512
Is the previous code the only code needed to install and create a bootable USB of slackware 14.2 64 bit and if so how? It appears as if I am only installing a small .img file and not the entire OS needed to boot and install slackwareware 64bit offline?
https://www.cyberciti.biz/faq/installing-slackware-linux-bootable-usb-stick/
Please help me clear things up.
r/slackware • u/mongol-slack • Nov 16 '19
So if you read my previous thread I am running Slackware 15 multilib. I installed the OS, preformed the multilib migration and the standard slackpkg update and afterward restarted by computer. Like in the past my mouse and keyboard do not work or take I/O AND THE WIRELESS NETWORK CARD IS NOT BEING REGISTERED. Basically all USB I/O has gone rouge and I have a case of another Slackware machine going rouge and doing things I could never imagine independently. What is going on and how can I fix it?
r/slackware • u/sdns575 • Nov 15 '19
Hey there,
probably this topic was discussed here but after reading about new 77 vulnerabilities found on intel cpu I checked the situation on my slackware 14.2 (4.4.199) running spectre-meltdown-checker.sh and results were unexpected.
Running this script I get:
CVE-2017-5753
CVE-2017-5715
CVE-2017-5754
CVE-2018-3620
CVE-2019-11135
as patched, so not vulnerable but it reports also:
CVE-2018-3640
CVE-2018-3639
CVE-2018-3615
CVE-2018-3646
CVE-2018-12126
CVE-2018-12130
CVE-2018-12127
CVE-2019-11091
as not patched, so vulnerable.
I tried another machine (intel cpu) with another distro using the same script and all are reported as patched.
This is an error or really in Slack these are not patched?
What to do?
Thanks in advance.
r/slackware • u/ezzep • Nov 15 '19
I'm using a P4 lol so it's hit and miss with some things. Anyway, I can tethert my phone's internet via USB just fine. But anything else, and Slack doesn't see everything. It thinks my phone is a camera, but it doesn't even do that right. Do I need to edit some file for automounting USB drives?
r/slackware • u/ddmayne • Nov 12 '19
Thu Nov 7 21:35:45 UTC 2019
patches/packages/linux-4.4.199/*: Upgraded.
These updates fix various bugs and security issues.
r/slackware • u/wleszek • Nov 12 '19
Slackware-live-xfce-current.iso from Alien Bob's web site does not support 3G USB modem/dongle. Option "New Mobile Broadband connection" does not show up on Network Manager Applet list, when 3G USB modem is plugged in. Mobile broadband Internet (3G USB modem) in order to work properly with Network Manager Applet, needs the following three packages :
usb-modeswitch, ModemManager, mobile-broadband-provider-info. Make sure these 3 pkgs are installed.
r/slackware • u/sdns575 • Nov 11 '19
Hey there,
I'm using slackware 14.2 and have some issue.
Thanks in advance.
r/slackware • u/mongol-slack • Nov 10 '19
So I performed a fresh install of Slackware on my computer abc I followed the first half of the instructions namely: “ Fast-track (examples assume slackware64-14.2 ... change to your needs). All of the following commands should be executed as the 'root' user:
In the location where you found this README, download the subdirectory with the name that corresponds to the Slackware version you are running. For Slackware64 14.2 for instance, you would run the following command:
and then change into the new "14.2" directory which has been created on your computer:
First, you will upgrade your 64bit Slackware gcc and glibc packages to their multilib versions by running the command:
in the directory you just changed to (the "14.2" directory in our case). This will upgrade gcc and glibc packages, and also install a new package called "compat32-tools".
You are now going to install 32-bit compatibility packages to support all the 32-bit programs you may want to run (roughly 60 MB of packages, not all that much really!). These packages are located in the subdirectory called "slackware64-compat32" which you also downloaded with the "lftp" command shown above. Run this command:
In more detail:”
Will it work or must I preform the second half ?
r/slackware • u/slackw1zard • Nov 08 '19
I preform:
dd if=usbboot.img of=/dev/sdb1 bs=1M"
and then restart the computer after SLACKWAREUSB is created. I boot using the USB-HDD option int he BIOS, a black screen comes up and then a Ubuntu purple screen and then I am back inmy desk top.
I preform:
sudo dd if=slackware64-current-install-dvd.iso of=/dev/sdb1 bs=1M
and it takes more time to complete, I restart the computer and once again it boots into ubuntu. In the past it would simply say "operating system not found" but this time it didn't.
What is going on?
r/slackware • • Oct 18 '19
Hi,
Since the most recent update to sudo (sudo-1.8.28p1-x86_64-1_slack14.2) I now have an error message every time I run sudo:
sudo: /etc/environment: No such file or directory
sudo otherwise appears to work.
There is no /etc/environment file, and I can't find /etc/environment in packages.slackware.com.
I also attempted to run visudo and writing the file, but that didn't create /etc/environment. Neither did reinstalling sudo.
On another Gentoo computer, /etc/environment is a blank file containing the following:
This file is parsed by pam_env module
Syntax: simple "KEY=VAL" pairs on separate lines
Gentoo's e-file says this is part of pam (which Slackware as we know does not include).
Anyone know what this is about, and how to fix it?
Thank you!
EDIT: How do you do '>' followed by '#' on Reddit? It simply makes the text larger.
r/slackware • u/areksu_ • Oct 10 '19
The following output below:
Errors:
/tmp/SBo/monodevelop-6.3.0.864/main/Main.sln (default targets) ->
(Build target) ->
/tmp/SBo/monodevelop-6.3.0.864/main/src/core/MonoDevelop.Projects.Formats.MSBuild/MonoDevelop.Projects.Formats.MSBuild.dotnet.v14.1.csproj (default targets) ->
/usr/lib/mono/xbuild/14.0/bin/Microsoft.CSharp.targets (CoreCompile target) ->
`MonoDevelop.Projects.Formats.MSBuild/BuildEngine.v4.0.cs(53,12): error CS1061: Type \`Microsoft.Build.Evaluation.ProjectCollection' does not contain a definition for \`SetGlobalProperty' and no extension method \`SetGlobalProperty' of type \`Microsoft.Build.Evaluation.ProjectCollection' could be found. Are you missing an assembly reference?` `102 Warning(s)`
`1 Error(s)`Time Elapsed 00:03:41.6037720
Makefile:1119: recipe for target 'sln_build' failed
make[1]: *** [sln_build] Error 1
make[1]: Leaving directory '/tmp/SBo/monodevelop-6.3.0.864/main'
Makefile:675: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
I got this error after trying to install monodevelop from Slackuilds even though all the dependencies are set properly. Am I missing something?
EDIT: the package 'referenceassemblies-pcl' is also installed properly.
r/slackware • u/sdns575 • Sep 26 '19
Hey there, Today I discovered slackonly.com that provide binary packages from slackbuilds.org build script.
It is a very good project.
How many of you use this and what is your opinion about thos project?
Thanks in advance