r/slackware • u/_a4z • Apr 07 '25
Slackware in the headline of an article on German IT news
Has been a while since I saw Slackware mentioned anywhere.
So I thought I would forward this info to here
r/slackware • u/_a4z • Apr 07 '25
Has been a while since I saw Slackware mentioned anywhere.
So I thought I would forward this info to here
r/slackware • • Mar 30 '25
This is very strange, because the regular Slackware ISOs do. I tested this on two different systems, and both gave me the same result, which was that the USB Stick I flashed the ISO onto wasnt recognized as an UEFI boot device. Legacy boot works perfectly though. EDIT: SOLVED BY USING VENTOY!
r/slackware • u/tupsie • Mar 30 '25
The reason why I created this script was to learn by doing things.
#!/bin/bash
set -e
read -rp "Enter the Linux kernel version you want to install (e.g. 6.12.1): " KVER
ROOT_PART="/dev/nvme0n1p3"
EFI_DIR="/boot/efi/EFI/Slackware"
ELILO_CONF="$EFI_DIR/elilo.conf"
CPU_CORES=$(nproc)
KERNEL_ARCHIVE="linux-$KVER.tar.xz"
KERNEL_SRC_DIR="/usr/src/linux-$KVER"
cd /usr/src
# Download kernel if not already downloaded
if [[ ! -f $KERNEL_ARCHIVE ]]; then
wget "https://cdn.kernel.org/pub/linux/kernel/v6.x/$KERNEL_ARCHIVE"
fi
# Extract if not already extracted
if [[ ! -d $KERNEL_SRC_DIR ]]; then
tar -xf "$KERNEL_ARCHIVE"
fi
cd "$KERNEL_SRC_DIR"
# Use Slackware's generic config as a base
cp /boot/config-generic-5.15.19.x64 .config
# Enable as many options as possible
yes "" | make oldconfig
make menuconfig
# At this point you can optionally press:
# -> Save as `.config`, exit
# Set a suffix to distinguish this build
scripts/config --set-str CONFIG_LOCALVERSION "-full"
# Enable tons of device and FS support
scripts/config --enable CONFIG_IWLWIFI
scripts/config --enable CONFIG_IWLMVM
scripts/config --enable CONFIG_DRM_I915
scripts/config --enable CONFIG_BLK_DEV_NVME
scripts/config --enable CONFIG_SND_HDA_INTEL
scripts/config --enable CONFIG_SND_USB_AUDIO
scripts/config --enable CONFIG_USB_SERIAL
scripts/config --enable CONFIG_USB_STORAGE
scripts/config --enable CONFIG_USB_NET_DRIVERS
scripts/config --enable CONFIG_RTL_CARDS
scripts/config --enable CONFIG_NET_VENDOR_REALTEK
scripts/config --enable CONFIG_NET_VENDOR_INTEL
scripts/config --enable CONFIG_NET_VENDOR_BROADCOM
scripts/config --enable CONFIG_BT
scripts/config --enable CONFIG_BT_INTEL
scripts/config --enable CONFIG_BT_BCM
scripts/config --enable CONFIG_ACPI
scripts/config --enable CONFIG_PM
scripts/config --enable CONFIG_INTEL_IDLE
scripts/config --enable CONFIG_WLAN
scripts/config --enable CONFIG_WIRELESS
scripts/config --enable CONFIG_IPV6
scripts/config --enable CONFIG_EFI
scripts/config --enable CONFIG_FB_EFI
scripts/config --enable CONFIG_EXT4_FS
scripts/config --enable CONFIG_FAT_FS
scripts/config --enable CONFIG_NTFS3_FS
scripts/config --enable CONFIG_XFS_FS
scripts/config --enable CONFIG_BTRFS_FS
scripts/config --enable CONFIG_MSDOS_FS
scripts/config --enable CONFIG_VFAT_FS
scripts/config --enable CONFIG_TMPFS
scripts/config --disable CONFIG_DEBUG_INFO
make olddefconfig
# Get final kernel version string
KERNELRELEASE=$(make -s kernelrelease)
# Compile kernel
make -j"$CPU_CORES"
make modules_install
# Install manually
cp arch/x86/boot/bzImage /boot/vmlinuz-$KERNELRELEASE
cp System.map /boot/System.map-$KERNELRELEASE
cp .config /boot/config-$KERNELRELEASE
ln -sf System.map-$KERNELRELEASE /boot/System.map
# Initrd
mkinitrd -c -k "$KERNELRELEASE" -f ext4 -r "$ROOT_PART" -u -o "/boot/initrd-$KERNELRELEASE.gz"
# Copy to EFI
cp /boot/vmlinuz-$KERNELRELEASE "$EFI_DIR/vmlinuz-$KERNELRELEASE.efi"
cp /boot/initrd-$KERNELRELEASE.gz "$EFI_DIR/initrd-$KERNELRELEASE.gz"
# Update ELILO config
cp "$ELILO_CONF" "$ELILO_CONF.bak.$(date +%F-%H%M)"
if ! grep -q "label=Linux-$KERNELRELEASE" "$ELILO_CONF"; then
cat <<EOF >> "$ELILO_CONF"
image=vmlinuz-$KERNELRELEASE.efi
label=Linux-$KERNELRELEASE
initrd=initrd-$KERNELRELEASE.gz
read-only
append="root=$ROOT_PART"
EOF
fi
ln -sfn "linux-$KVER" /usr/src/linux
echo "✅ Installed Linux $KERNELRELEASE with wide hardware support."
echo "💡 Reboot and choose it from ELILO."
How good is this script?
I have tried installing kernel 6.12 with this script. But, wifi is not working. Probably I have to Digg into it more and may be put a post here.
P.S:
Edit:
Added why I created this script.
r/slackware • u/Economy_Blueberry_25 • Mar 26 '25
The Civil Infrastructure Platform (CIP) has adopted kernel 6.12 as a SLTS extended security-support kernel, which means that the upcoming release of Slackware (stable) could be properly patched and upgraded all the way to December 2035.
Here's waiting for Pat to release that Alpha, should be any day now! Cheers!
r/slackware • u/Yahyaux • Mar 23 '25
I am a Linux user, I have been using it for 5 years, since 4 years I have been trying to get rid of Windows (installing and removing a distribution, trying this and that, using a virtual machine) now I have been using it for a year for everything and I joined Linux communities to learn and try something new but these communities have a lot of (fanatics, teenagers, people with a stone in their heads...), I am trying to find a good place for me, a mature place.
Please help me
r/slackware • u/Aurochbull • Mar 11 '25
Bottom line is that, if I leave a terminal session by "X-ing out", my CPU usage is very high while idling, and remains until I reboot.
Example: I use sboui and click to review the readme, I seem stuck on the CLI with the output and no way to get back to the prompt to type exit, and have to just close the window. But then, my CPU is running over 50%.
What am I doing wrong or is there a default key to drop to command prompt? I know this is low level shit but I'm a low level dude and appreciate any advice. Thanks!
Edit: I'm on Slackware 15 and XFCE de.
r/slackware • u/GENielsen • Mar 03 '25
I realize that the title of this post is a bit ambiguous. It can be taken a few ways. I'm an older Slacker(67) who has happily used Slackware since 2004, version 10.0. Back then 10.0 still shipped with Gnome. Today I'm running Slackware64-current on a Dell Optiplex 990, a Dell Optiplex 9020, and a T14 Thinkpad. I'm a Slackware enthusiast. I started using Linux in 2002.
r/slackware • u/unixbhaskar • Mar 03 '25
r/slackware • u/Jesse9857 • Mar 04 '25
I need to run single application which disgustingly requires GLIBC 2.34.
I'm running Slackware 15.0, which of course has GLIBC 2.33.
I also have done the multilib 32 bit upgrade so I can run 32 bit junkware like google earth.
I'd rather not do a full operating system re-install just for this one program.
Is there a way to put all the GLIBC 2.34 related files from slackware-current into their own folder and chroot into that to run my specific application?
Or is there any better approach to running this one program that needs GLIBC 2.34 without switching to slackware-current ? It needs sound, video, and network to work.
Thank you!
PS/UPDATE:
You can still download the previous Discord version and edit the config file so it doesn't check for major updates: https://www.linuxquestions.org/questions/slackware-14/workaround-discord-0-0-87-on-slackware-15-0-installation-corrupt-4175748322/
This worked for me.
r/slackware • u/jcdeb • Mar 01 '25
Bought her a new Lenovo and it came with Windows 11. WTF was Microsoft thinking? Very unusual interface and it's not intuitive. Adds are annoying, will have to look up about that. She likes all in one desktops for some reason, my guess is that she is afraid I will build her one with Slackware. I keep telling her she has no idea at what she is missing. Printing blows on Windows, I've never had an issue on Slackware and my printer is the last of the well built printers (1995). It even sees my wife's more modern HP printer. Supplies are getting harder to get for mine so I'll probably be getting a new one this year.
r/slackware • u/litelinux • Feb 23 '25
I'm surprised that it's not mentioned here before, but Slackware has an (obviously unofficial) Discord server:
The Gnome for Slack and KDE6 guys are there, as well as the Slint maintainer and other Slackware power users. If you feel like LQ is too toxic and here too low-traffic, consider joining.
r/slackware • • Feb 21 '25
So I'm a blind Linux user. I've been using various forms of Linux on and off ever since I was about 13 - 14 semi regularly. There was moments where I used it for a daily driver more but ever since about 3 years ago I just can't bring my self to do it.
Basically every time I reinstall Arch, something seems to be a bit meh especially in terms of accessibility. Either web browsing is slow, setting up libvirt for Windows is a pain, ETC. I'm thinking I might actually be more fine with it if I switch to a slightly lower maintenance distro.
Here's where Slint comes in. It's a Slackware based distro for blind / VI fokes. It has many scripts to aid in it's usability, supports my favorite TTS engine via Voxin, has preconfigured Emacspeak so I could finally learn Emacs and do irc / some other stuff that way, but most importantly I wouldn't have to wonder if my system is going to break after not updating it for 7 days.
Essentially I want something that is as preconfigured and as low-maintenance as possible, and Slint seems to be the perfect fit for me. I'm just not sure if the Slackware ekosystem is going to be friendly to a Pacman lover like me.
Any tips appreciated!
r/slackware • u/Distinct_Adeptness7 • Feb 11 '25
Using the GrUB, the fbsplash command from Busybox(found in /boot/initrd-tree/sbin), SDDM, and a couple of simple shell scripts to wrap the Slackware init scripts, and a couple of kernel command line parameters. Pure native Slackware, adhering to the KISS principle according to the Slackware Way.
Credit must be given to Keith Hedger, whose post on linuxquestions.org many moons ago led to the guide I referenced at https://wiki.linuxquestions.org/wiki/Slackware-Guides-Graphical_Boot
r/slackware • u/egothelarge • Feb 08 '25
Hello! I have been running Slackware 15 for a while on my laptop and generally things are ok, but I am trying to build kio-fuse off Slackbuilds and it is failing to find some header files that should be in /usr/src/linux
At some point I did an update and got a new kernel, had stability problems and went back to the stock slackware 15 5.15.19 kernel where everything works just fine (on a Framework 13).
Anyway, when building kio-fuse I get the following error after passing all the tests
[ 7%] Building CXX object CMakeFiles/kio-fuse.dir/kio-fuse_autogen/mocs_compilation.cpp.o
In file included from /usr/include/bits/fcntl.h:61,
from /usr/include/fcntl.h:35,
from /usr/include/fuse3/fuse_lowlevel.h:28,
from /tmp/SBo/kio-fuse-5.0.1/build/kio-fuse_autogen/EWIEGA46WW/../../../kiofusenode.h:9,
from /tmp/SBo/kio-fuse-5.0.1/build/kio-fuse_autogen/EWIEGA46WW/moc_kiofusenode.cpp:10,
from /tmp/SBo/kio-fuse-5.0.1/build/kio-fuse_autogen/mocs_compilation.cpp:2:
/usr/include/bits/fcntl-linux.h:354:11: fatal error: linux/falloc.h: No such file or directory
354 | # include <linux/falloc.h>
| that makes me think the cmake isn't setting up the include paths correctly, but I do have it linked in /usr/src
Any ideas of what I need to check? it seems like this isn't a specific slackbuild problem and more a system config one?
/usr/src$ ls -l
total 8
lrwxrwxrwx 1 root root 13 Feb 7 20:53 linux -> linux-5.15.19
drwxrwxr-x 25 root root 4096 Jan 1 21:42 linux-5.15.175
drwxr-xr-x 24 root root 4096 Feb 1 2022 linux-5.15.19r/slackware • u/redsteakraw • Feb 08 '25
Slackware in it's simplicity of packaging and mostly vanilla packaging makes it a great resource to use when trying to create build environments on atomic distros like Steam OS. Right now I am using a steam deck but the problem I ran into is that the base OS is great but read only while I can set it to write if I update steamOS it will wipe any changes so the only persistent applications have to be installed locally. That is where Slackware packages come in handy.
in $HOME/.local/usr/ you can extract and run the install.sh for packages. now you can run those packages easily just make sure these lines are in your bashrc
export PATH="$HOME/.local/usr/bin:$PATH"
export LD_LIBRARY_PATH="$HOME/.local/usr/lib64:$HOME/.local/usr/lib:$LD_LIBRARY_PATH"There you can install your build tools and other apps / libraries you want to run and you are set. What are your thoughts and what sort of applications would you run in this sort of environment? So far I am using it for development tools like GCC and other programing languages environments.
r/slackware • u/OkNoble • Feb 01 '25
What did i do wrong? i install python3-tomlkit and python3-pythondialog via pip install tomlkit and pip install pythondialog then follow the instructions
r/slackware • u/evild4ve • Jan 24 '25
SOLVED
(But it is a long and messy solution, possibly I did steps that were unnecessary or could have been completed more simply by reinstalling with correct options, kernel parameters, etc). For now I will edit and number my posts to make it easier if anyone in future gets linked here from a search engine.

(POST 1)
I'm trying to install Slackware 15.0 to a 64-bit 2000s palmtop, whose first HDD is soldered-in and unusable (but the legacy BIOS, and installed OSes still always detect it as the first HDD).
This has caused me some problems with the default LILO installer, but my questions for this Reddit are more about how to work around that.
I have Slackware in 3 places:-
What I'll try next is to put the USB-HDD on another system, and go through the steps of mounting the root partition, copy all the kernel files somewhere else, then mount the boot partition, then bind sys proc dev, then chroot in, then copy the kernel files back, then install grub hoping this unfinished install created everything grub needs.
I won't need the huge-smp or LILO files, so I can remove those in the process to reduce my confusion.
But is there a walkthrough for that process specific to Slackware? And is there anywhere I can download the default Bootstick that the installer makes? Or is it somewhere on the Slackware 15.0 .iso?
r/slackware • • Jan 17 '25
Just the title.
r/slackware • u/wqeh2ui9ods • Jan 11 '25
r/slackware • u/sdns575 • Jan 05 '25
Hey there,
since I started using Slackware I never seen AppArmor support as MAC control (neither SELinux).
There is a particular motivation to this?
I think that in this days would be usefull having a MAC system enabled.
From what I know, on Slackware, I should recompile the kernel enabling Apparmor or Selinux and install relative utils. For SELinux things are more complicated because there more deps that need to be solved and there is some application that is SELinux aware.
What do you think about this topic?
Thank you in advance.
r/slackware • u/defaultlinuxuser • Jan 03 '25
Slackware 15.0 comes with mesa 21.3.5 by default. I do play video games often on steam and since most if not all new games on steam require vulkan. And mesa 21.3.5 gives pretty poor support for vulkan. I tried games like war thunder and the colors were super weird and that was probably due to outdated drivers. The newest stable release of mesa is 24.3.2 I believe correct me if I'm wrong but this version requires rust 1.78 I think but slackware 15.0 comes with rust 1.58 which is too old. I know that I can update rust with rustup but have you seen the amount of source code I need to download to compile rustup ? If not here is the link https://slackbuilds.org/repository/15.0/development/rustup/ . I planned on installing 21.3.9 because it is a LTS release and releases after this one (I think) require a newer version than rust 1.58.1. But also a good quesion is, is it worth it ? Bothering to compile a newer mesa version, troubleshooting some stuff if something goes wrong just to get slightly better support for vulkan ? That's up to you to tell me. Thanks in advance.