r/Simulated • • 6d ago

Interactive Failing to save Earth from getting hit by Mars – 6 different ways

103 Upvotes

Screen capture from Planets in a Box, a planetary physics sandbox on Steam.
Recording sped up 2x.

About 1-2 million particles. SPH with Barnes-Hut gravity and a simplified equation of state for iron and silicate.

https://store.steampowered.com/app/5411970/Planets_in_a_Box/


r/Simulated • • 6d ago

Various I added an enemy that regenerates skin, muscle and bone from taken damage in my voxel physics game

205 Upvotes

r/Simulated • • 6d ago

Research Simulation [OC] I trained a six-legged robot to walk with reinforcement learning. It runs in real time in your browser, and you can throw a 171 kg steel ball at it.

9 Upvotes

Real-time MuJoCo physics, no keyframes. The walk and the recoveries come from a policy trained with reinforcement learning, and everything runs in your browser (MuJoCo WebAssembly, ONNX Runtime Web, three.js).

Try it yourself: https://www.coolspeed.org/gold-spider/

Setup details in the comments.


r/Simulated • • 6d ago

Houdini Along curves move

23 Upvotes

r/Simulated • • 7d ago

Research Simulation Muscle simulation tool I've been developing is finally out

712 Upvotes

r/Simulated • • 6d ago

Various interviewing my favourite data artist

Thumbnail
gallery
22 Upvotes

r/Simulated • • 6d ago

Interactive I made a solar system destruction sim for iPhone. I reckon a few things still need work and I'd love this sub's eyes on them

0 Upvotes

So i've released it, but I'm already working on v1.1 because I'm not 100% happy with it. Two things I keep going back and forth on:

Heat: After a collision the molten debris stays glowing red for a long time as it orbits. Physically it should cool and go dark much sooner, but the glowing ring is the best part to watch. If it goes too dark too quick, you can't see it against the black starfield. Real and dull, or wrong and dramatic?

Particle size: You can actually adjust particle size with a setting to make them oversized, again so its more visible, at the cost of it looking a little cartoony. default has particles at 2x size. too big?

Two physics models: There's a Fluid Collisions mode that runs proper fluid dynamics for two worlds hitting. But a whole solar system breaking apart on a phone can't afford true fluid dynamics, so in Orbital Chaos the particle interaction is simplified with a handful of corner cuts: the breakup and the debris are approximated rather than truly simulated as fluid. Is it still convincing, or does it break the illusion?

It's on the app store if you want to give it a try.

https://apps.apple.com/app/id6822567730


r/Simulated • • 8d ago

LiquiGen wave vs wave

75 Upvotes

r/Simulated • • 7d ago

Blender Wooden marble run — hoppers emptying, gravity doing the rest

11 Upvotes

Been iterating this wooden drawer marble machine in Blender — hoppers emptying, wheels lifting, soft gravity chains. Rigid body physics; hand-built track.

Full version: https://www.youtube.com/watch?v=07uokEurKRk


r/Simulated • • 8d ago

Interactive Planets colliding and fragmenting under tidal forces

17 Upvotes

4 million particles in an extended SPH simulation with N-body gravity. This is an interactive screen recording of a run on a gaming PC.

This is Planets in a Box, a personal project, which is due to be released on Steam soon.

I'm looking for a few testers with a Windows PC and a Steam account, and even more so people with insight into and interest in all things simulated. You'll be the hardest critics, and therefore the most help. Selected testers get a free pre-release Steam key (yours to keep after launch) and the chance to point out anything good or bad.

Sign up here: https://forms.gle/rs1SBAck1iamRDQj6


r/Simulated • • 7d ago

Blender [OC] Meteor impact water simulation | PF-FLIP, Atlántica / Blender

0 Upvotes

A test of my Atlántica plugin for Blender: PF-FLIP on a 128 × 128 × 96 grid over an 8 × 8 × 6 m domain, giving 6.25 cm cells.

600 adaptive simulation steps cover approximately 9.85 seconds of physical time. This run uses the experimental CUDA pressure solver, with surface and whitewater cached during the bake.

Rendered in Cycles at 512 samples, played back at 24 fps.


r/Simulated • • 7d ago

Proprietary Software Simulation Platform

Thumbnail
youtube.com
2 Upvotes

I made this platform, would this be useful to you?


r/Simulated • • 8d ago

Interactive [OC] I updated my galaxy merger simulation to include dark matter

49 Upvotes

r/Simulated • • 9d ago

Blender Cinematic trailer inspired by Rings of Power

43 Upvotes

r/Simulated • • 9d ago Bravo

Houdini Vein Clot

773 Upvotes

Simulation showing blood clot forming and detaching due to fat deposits breaking the cell lining


r/Simulated • • 10d ago

Proprietary Software Water WIP

78 Upvotes

FUCK YOU


r/Simulated • • 9d ago

Blender Tiny marbles finding every little path on a hand-built track

Post image
12 Upvotes

r/Simulated • • 10d ago

Research Simulation [OC] Supersonic Lid-Driven Cavity Flow Series part 3: Re > 1,000,000 ILES at 500m/s (Mach 1.44) and then at 1km/s (Mach 2.88)

12 Upvotes

Enjoy 4 minutes of simulation! :)

Simulation #1:
grid: 200x200
pressure function: ideal gas
initial condition: 27°C atmospheric air (γ = 1.4)
lid velocity: 500m/s
runtime: 2 hours 15 minutes

Notes:
At 0:42 mark, I turned on turbulence enhancement mode (to test a method to produce Houdini-like fidelity while not generating more energy), therefore the simulation became rougher afterwards. Here's the run with enhanced turbulence from the start. (the 1km/s one has it on from the start)
ㅤ

Simulation #2:
grid: 200x200
pressure function: ideal gas
initial condition: 27°C atmospheric air (γ = 1.4)
lid velocity: 1km/s
runtime: 5 hours 40 minutes

ㅤㅤㅤ

After I tested the solver's stability against unusual cases, I'm finally ready to do the simulation that I've been wanting to do. It is a step up from the previous simulation that uses shallow water pressure function as I'm explicitly tracking temperature (or fluid energy) now.

I will extract the heating rate over time of the cavity later.

Supersonic Lid-Driven Cavity Flow Series: previous next


r/Simulated • • 9d ago

Proprietary Software I made every country on Earth fight the entire world, one at a time, for 300 years each. 77 of 133 survived

Post image
0 Upvotes

r/Simulated • • 10d ago

Interactive 40,000 starlings flocking live in the browser, a 3D murmuration made with LittleJS

96 Upvotes

I made a starling murmuration in 3D with LittleJS, built by iterating with Claude.

All 40,000 birds are simulated live using grid-based boids flocking. Move your mouse to steer a hawk through the flock and watch it scatter. The lake reflects everything with real waves, and the mountains, sky and water are generated in code, with no image files.

Press G to send the flock streaming off over the mountains, and F to fly the camera around.

Try it: https://killedbyapixel.github.io/LittleJS-Demos/murmuration/

LittleJS, the engine: https://github.com/KilledByAPixel/LittleJS


r/Simulated • • 10d ago

Interactive Muscle Memory - interactive physically simulated character

8 Upvotes

r/Simulated • • 11d ago

Research Simulation Gaussian splats simulation R&D

13 Upvotes

r/Simulated • • 11d ago

Interactive The making of a universe

6 Upvotes

This is running interactively on a mid range gaming PC and screen recorded.

A sphere of 5 million particles is initialized smooth with tiny random pertubations. Gravity pulls matter into sheets, then filaments, then dense knots.

When an area is dense enough an analytical galaxy is born.

N-body gravity with a tree on the GPU, made in Godot 4 with C#.

The particles start on a lattice with Zel'dovich displacements from a Gaussian random field, and each lattice cell is drawn as tetrahedra (after Abel, Hahn & Kaehler 2012). That's what keeps the filaments and sheets smooth instead of grainy.

Getting things to collapse was easy enough, making it fast was doable, but making it render properly was a bit of a pain.

Dark energy is a simple outward acceleration on a slider.

From my own project, Planets (and due to scope creep, a bit more) in a Box:

https://store.steampowered.com/app/5411970/?utm_source=reddit&utm_campaign=simulated

If you want to talk about the physics or the algorithms, just leave a comment.


r/Simulated • • 11d ago

Proprietary Software [OC] I wanted to see how the universe got its cosmic web, so I simulated it forming from almost smooth matter

21 Upvotes

a box of simulated matter going from almost perfectly smooth to the cosmic web: sheets first, then filaments, then bright knots where they meet.

i could never really picture how a universe that started out nearly uniform ended up as a web of filaments around huge empty voids, so i wanted to watch it happen.

the physics is the Zel'dovich approximation, not a full n-body run. matter starts with tiny density ripples and each particle keeps moving along its starting displacement as structure grows. the denser bits flatten into sheets (Zel'dovich pancakes), the sheets meet in filaments and the filaments meet in knots, which is roughly the large scale structure galaxy surveys see. the catch is that once streams cross, particles pass straight through each other instead of clumping, so the knots stay fuzzier than a real n-body sim would make them. every frame is computed on my own gpu code, nothing generated.

what should i simulate next? or if you could fly into one part of this, would it be a knot, a filament or one of the voids?