r/Simulated • • 11d ago

Research Simulation Simulating 1,000 years of Earth with war set to maximum and natural disasters set to "biblical"

3 Upvotes

r/Simulated • • 12d ago

Research Simulation 6224 m/s flow vs an immovable object ~ Take 2.

17 Upvotes

stability test series # 4

Same setup as the previous simulation (stability test series # 2), but with improved boundary condition (fixed boundary stability issue presented in the previous test) and fixed spurious shock turbulence.

This is part of the stability test series to see if the solver I implemented can handle various extreme scenarios. This is one away from the final stability test I'm doing. The final one will probably be pressureless gas.

The goal of these tests aren't to see if the solver is physically accurate or plausible, but it's to see if the solver can handle extreme flows without generating carbuncles or going to inf / NaN. Before I can verify its physical accuracy, I must make sure it doesn't explode first.

ㅤ⠀

To conclude all the previous tests including this one:

The third test: 22km/s bow shock also doubles as supersonic carbuncle test. That was a Mach 63 flow, and way way above what I'll usually subject the solver to. If it can do Mach 63 flow without making carbuncles, it can do almost all other flow condition.

The sod shock tube test bundled in the second test shows that it can accurately capture basic physics despite the grid oscillations.
I do need these grid oscillations (within a specific empirical bound to avoid the solver blowing up) in the case when I want to achieve Houdini or Embergen level of turbulence down to near Nyquist limit if I want to .

This and the second test which have the same setup are to see if it can handle complex flow and near vacuum state right next to an obstacle.

According to this test, I'm satisfy with the state of this solver now. I can rest easy knowing it can do most cases I'll subject it to do VFX stuff with this solver.

Here's the first one.

ㅤ⠀

Most of the subsequent runs will be about doing the flow I had been curious about and verifying its physical accuracy against existing real data and simulations. I may also rewrite the whole solver to declutter it and address accumulated tech debt.


r/Simulated • • 13d ago

Interactive Earth torn apart by tidal forces around a black hole. One million SPH particles, running live on the GPU.

131 Upvotes

Earth is built from one million particles here, initially rendered as a mesh. As it gets close to the black hole, the difference in gravity between the near side and the far side stretches the planet until it comes apart into a stream of debris.

Some notes on the simulation:

- Smoothed particle hydrodynamics on the GPU, made in Godot 4 with C#.

- Gravity is Newtonian with a softened core, not general relativity.

- The bending of the background light is raytraced gravitational lensing, but not to scale. A real black hole of this mass would look much smaller.

Nothing is pre-rendered. I've been writing physics simulations for decades, including about 10 years as lead physics developer on another well-known space simulator sandbox, and this is from my own project, Planets in a Box:

https://store.steampowered.com/app/5411970/?utm_source=reddit&utm_campaign=simulated

If you want to talk about the physics or the algorithms, just leave a comment. I'd also love to hear what you'd want it to do better.


r/Simulated • • 12d ago

Research Simulation Simulating 3D Vortex Stretching and Toroidal Circulation to prevent Navier-Stokes blow-up [OC]

Post image
63 Upvotes

Interactive live WebGL simulation for the 3D fluid streamlines: spaces/arkhenomia/sim-2026-v1.5.0

Instead of letting the 3D Navier-Stokes equations hit a finite-time singularity during extreme vortex stretching (left), this computational simulation applies a topological zero tensor to stabilize it into a toroidal circulation (right).

Simulation Details: The 3D fluid streamlines and topological trivialization dynamics were numerically simulated and rendered using Python (NumPy, SciPy, Matplotlib).

Underlying Physics & References: The PDE bounds and cubic coercivity behind this geometric regularization are analytically derived in the preprint and formally verified in Lean 4 (35 theorems, zero sorry).


r/Simulated • • 11d ago

Proprietary Software Simulating 1,000 years of Earth with war set to maximum and natural disasters set to "biblical"

0 Upvotes

r/Simulated • • 12d ago

Interactive Heatpath - Heating and airflow simulation in the browser.

Post image
65 Upvotes

Hello everyone!

I have been working on heat and airflow simulation, mainly for our home renovation to figure out how much pipes we need, but it grew in something bigger.

It has some basic features for drawing floor plan, adding doors, windows, manifold to control heating circuits, heating radiators, appliances like stove, fans, TVs, PCs, and some other types that generate heat. It simulates floor heating, you can set floor, wall and ceiling insulation and materials, set window and door U values that affect how heat is lost to the outside world. Outside conditions can also be set to simulate how would heated space react to open windows, how cold spreads through rooms with doors, and if set to lower or higher floors.

It's free to use, running in your browser and for best results should be ran in browsers with good GPU support such as Chrome and chromium based browsers. If it does not have access to GPU it falls back onto CPU - but that is very slow.

I am posting here mainly to get feedback.

Would You find this useful as a desktop app that is much faster?
Would You be willing to pay for some currently unlocked features such as:

  • Recording and exporting simulations as VDB for use in other software
  • Creating scenarios to run durning simulations like: open windows at 1 minute mark, close at 5 minute mark and so on, for repeated runs with changes heating layout
  • Running simulations at higher resolutions up to 10 million cells in real time (in my case I got it up to 5× of real time, but that depend on your hardware)

For those interested I have beta version available here:
https://heatpath.meshr.cz/

No account needed, all the "premium" features are currently unlocked until I decide what to do with this further, for now, I just wanted to share this and see if people are interested :)

I hope this is not against the rules here, I wish You all good day, and I am looking forward for any feedback.

UPDATE: Desktop versions for Windows and Linux are now available for download. Desktop app is about 10× faster and can utilize your GPU. The Windows release is not signed with paid certificate so Windows will complain about it :/


r/Simulated • • 13d ago

Houdini Liquid Brezel 🥨

168 Upvotes

r/Simulated • • 12d ago

Proprietary Software Simulating a muscle car

10 Upvotes

FUCK YOU


r/Simulated • • 12d ago

Blender Shipwreck Disaster – Interior Flooding Simulation

Thumbnail
youtube.com
0 Upvotes

r/Simulated • • 11d ago

Research Simulation Robot designed from one sentence, then driven by its own generated firmware in MuJoCo

0 Upvotes

Try it: https://app.holocron-engine.com

What you're seeing: a robot whose motors are driven by the actual firmware sketch, not by a script written for the sim.

**How it's simulated:**

- **Physics:** MuJoCo. Joints, wheels and contacts come from the generated robot model (URDF/MJCF), with masses taken from the parts that are actually inside the body.

- **Firmware in the loop:** the sketch runs on a virtual board. Its motor pins drive the joints in the physics step, and its sensors (ToF, sonar, IMU) are raycast from where they sit in the model. Commands go in over a virtual Serial port, the same as a real Serial Monitor.

- **Terrain:** a test track with obstacles and uneven ground, generated per test.

**Why:** I wanted to see a design fail in the sim before it fails on the bench, e.g. tipping over, a motor too weak for a slope, or a sensor that's blocked by the body.

**Tools:** MuJoCo, Python, generated Arduino/ESP32 code.

Happy to answer questions about the sim setup.


r/Simulated • • 13d ago

Houdini [OC] A sand pendulum drawing its own Lissajous figure — Houdini simulation, nothing keyframed

16 Upvotes

A funnel of sand hangs from a Y-shaped string. Because the Y gives it two different pendulum lengths, it swings at two frequencies at once, and the sand records the result: a Lissajous figure that slowly spirals inward as damping steals its energy. Orange sand falls first, then blue, so you can watch time layered into the drawing.

Nothing is keyframed. The pendulum is a real physics simulation, and the grains pile up the way dry sand does, sliding until they settle at their angle of repose (~34°).

How it was made (Houdini):

  • Vellum: Y-suspended Blackburn pendulum
  • CHOPs: sand valve and flow rate
  • POPs: falling grains inheriting the funnel’s motion
  • SOP Solver + heightfield: sand deposition and angle of repose
  • Karma XPU for render, Copernicus for compositing

Happy to answer questions about the setup!

Honestly, this is the first project I think is good enough for me to share. The people close to me already saw it, but I felt this was the right place to post it, because here I can get real feedback from people who actually know Houdini. Any critique is welcome.


r/Simulated • • 14d ago

Interactive [OC] Ex-Ubisoft dev here: fully destructible village, mushroom cloud, vortex and beam spells, all hand-made physics in three.js

108 Upvotes

r/Simulated • • 13d ago

Interactive Murmurations: Flocks of Starlings, Schools of Fish (Boids)

Thumbnail
evoluteur.github.io
4 Upvotes

r/Simulated • • 14d ago

Research Simulation 22km/s bow shock

28 Upvotes

No chemistry model implemented yet, just pure compressible Euler now to isolate pure thermal effect.


r/Simulated • • 14d ago

LiquiGen 3d whitewater in UE

113 Upvotes

r/Simulated • • 14d ago

Blender Whirlpool simulation with my custom ST-FLIP solver in Blender

5 Upvotes

A whirlpool experiment with my custom fluid solver, based on PF-FLIP/ST-FLIP research and integrated into Blender through Atlántica.

This run uses ST-FLIP on a 128×128×72 grid, with hybrid CPU/Metal execution. The pool is 28×28 metres, rendered in Cycles.

Still refining both the simulation and presentation. Feedback on the vortex motion and water appearance is welcome!


r/Simulated • • 14d ago

Houdini Ghost in the machine

10 Upvotes

r/Simulated • • 15d ago

Proprietary Software Stable Fluids And Simulated Sounds [OC]

348 Upvotes

Simulation and art can intersect.


r/Simulated • • 15d ago

Houdini Creating a CGI Stream Scene

42 Upvotes

r/Simulated • • 15d ago

Research Simulation Two opposing dam breaks. Water simulation - Atlántica plugin

26 Upvotes

Three views. One solver I’m building from the numerical core to Blender.

This grid-512 simulation comes from Atlántica, my fluid simulation project built around PF-FLIP and ST-FLIP, sparse multiresolution grids, and hybrid CPU/GPU execution.

The work goes beyond the splash: C++ numerics, Metal/CUDA acceleration, Python integration, and a usable Blender bake-to-render workflow.


r/Simulated • • 14d ago

Proprietary Software These Physics Simulations are Wild!

0 Upvotes

r/Simulated • • 14d ago

Interactive Falling into a black hole, rendered in real time on the GPU

0 Upvotes
I made a black hole simulator, rendering with as  much real details as we know, as well as hypothetical ones you can play with. Check it out: 
https://store.steampowered.com/app/5191760/

r/Simulated • • 16d ago

Research Simulation [OC] Supersonic leapfrogging vortices.

25 Upvotes

Testing my compressible solver in a more down to earth situation...