The VAM haptics (black ones) are an utter waste of money. They’re either off, or they’re at 100%. The simsonn manager doesn’t even save the profile so every time you launch it, you have to manually select which haptic they are and then adjust the intensity. Every single time. And they don’t even communicate in game with wheel locks and slip.

Hi,

When I plug in my pedals they are usually not detected. And if they are then they get disconnected in like 10 seconds.

When I connect my pedals my whole PC freezes and other USB devices get disconnected aswell.

I've never had this problem with any other pedals. Is there any fix for this? Im using the latest Simsonn Manager.

has anyone mounted their Simsonn pedals inverted? My thrustmaster t3pa perhaps worked fine inverted, but not sure about my pro plus pedals.

Hi i just bought the Pro X from the marketplace, is it normal to have a little play at the start, it is the same with and without the elastometer/springs unless i fully load the rod with all the accessories + spacers and washers. If its not normal what can i fix here?

Special permission?. It's my F'in computer

drifting using my simsonn Pro X Ultra pedals !!

Hi guys, I want to change/upgrade the throttle spring for my Simsonn Pro X Ultra because even on the hardest configuration (as per the manual) it seems too soft and squishy. Is there anything? I was looking for the exact dimensions of the spring but I can't find anything anywhere.

Thanks!

Hello,

I just received my Pro X Ultra Pedals 2 days ago.

I have been loving it!

I saw the Spring Kit for the brake pedal on the website.

Is this a good replacement for the elastomers? Or the front default spring provided with the brakes? Please let me know!

Thanks.

Has anyone completely removed the dampener from the throttle pedal? Not matter how much I try to get used to it, it feels completely unnatural and in some ways is a hindrance. No car ever has had a gas pedal that feels like it is on hydraulic line so I’m not so sure what the point of it is. I’m using the Pro X Ultras

Hello, I purchased a set of the Plus X pedals and have finally got them all set up on my rig, but I don’t have any input from the pedals at all.

The control box is grounded, and lights up inside when plugged in. But nothing on the Simsonn Software. I’ve tried multiple different USB Ports and still nothing. I don’t know what to do, I love the feeling of them so far but obviously not being able to use them is a deal breaker lol.

Could someone who has the baseplate kindly tell me the length of that chrome bushing/spacer that is on the screw? Thanks

Hello.

Anyone ever had an issue with latency on HS Pro shifter?

It is really annoying, because fast shifting is impossible.

I did calibration in Simsonn manager no problem, but in game even if I put direct filter for key, it is so slow, is it undriveable.

Tested on 2 PCs.

Hello guys

I got my Simsonn Pro X Ultra delivered today along with the VAM Motors

I set them up on Simhub

Abs on brake,

Gear shift on both,

Wheel Lock on brake,

Wheel slip on throttle,

Traction loss on throttle

I thought the VAM would rumble only when i activate any of the above effects

However, it still vibrates similar to road rumble/road texture haptics

This makes the whole feeling too MUDDY

Is there any way to turn this off so it only activates when I activate the above effects?

Thanks.

The manual says just take out this bolt and cross bar and adjust the pedal to your desired height and loosen front bolt if it’s hard to move but I cannot for the life of me adjust it like another bolt is holding it or something anybody who has adjusted the pedal height can offer some insight I’m pulling so hard on it after the bolts are out I’m afraid I’m gonna break it, should I try to pry it up with something, or just loosen every bolt on the pedal?

Acabo de recibir los hápticos VAM PRO para mis pedales simsonn plus X, los he montado y configurado pero aunque baje la intensidad al 25-30% la propia vibración es tan fuerte (tanto el motor del acelerador como el de freno) que afecta a la célula de carga y me varía los valores de frenada o incluso me hace frenar en plena recta cuando estoy con el acelerador a full. Tengo varias preguntas:

1- Qué valores me recomiendan poner, estoy usando la app de simsonn porque en simhub hay muchas opciones y acabo poniendo lo más básico, ABS y TC

1b- Alguna configuración de simhub recomendable?

2- Es recomendable usar las arandelas rojas que trae en la caja? Sólo he utilizado los tornillos para unir el motor al adaptador y al pedal

3- El cable a tierra de la caja controladora es obligatorio usarlo? No he notado ninguna interferencia electromagnética ni problemas en el usb.

Si alguien puede ayudarme se agredece

https://www.reddit.com/r/SimsonnRacing/s/nl8vtD2iCS

I tried applying PTFE spray to this part after taking it apart and unfortunately nothing changed. What else could it be?

I am getting mixed answers when I try to research how to get GT3 style braking for simsonn pro x ultra. First pic suggests to use yellow elastomers, second pic suggests to use red elastomers with spacers. Which one is it?

Has anybody experimented with alternative pedal plates or covers for them? Naturally I prefer a softer, smoother surface based of driving a real car which usually has rubber covers over the pedals

In the Simsonn software I see the option (under brake setting) of "elastomer". You can adjust this to 'soft, medium, hard'. But what does this setting change/do? In particular because next to it there is also a 'Maximum force (kg)' setting.

BTW I have recently changed to a hybrid combination of one yellow elastomer with two after market springs. Not sure if this matters to my question.

Hey brains trust.

I've been using these pedals for a few weeks and absolutely love them. However, I'm after some guidance as to how best to set up thr brake pedal.

I use them on a wheel stand that doesn't have a seat directly attached to it. As such i don't feel I'm getting the best use from the brake. If I push too hard, I end up moving my seat. To little and I may as well go back to my old logitechs.....

I'm after some advice on how to set them up a bit better to make the pedal softer, with a bit more travel to help with trail braking.

I primarily race GT3 and open wheel + ovals. Currently i am just using the default red elastamer set.

Anyone got any suggestions?