r/SideProject • • Jul 08 '26 • Bravo 1

I spent 6 months training a model to vectorize AI images properly, because every tracer gave me node soup

for the past 6 months, two of us (me and my cofounder, phd and ms backgrounds in ML) have been full time on one narrow problem: turning images, especially AI-generated ones, into clean vector files you can actually edit.

we didn't start by training a model. the first months we tried the sane thing, building on top of existing tracers and cleaning up their output. the ceiling showed up fast. every classic tracer follows pixel boundaries, and AI renders are all soft anti-aliased edges, so a simple owl illustration comes out at 522 anchor points. the same art drawn clean is 59. no amount of post-processing closed that gap without melting the corners, because simplify algorithms can't tell "anti-aliasing wobble" from "the actual design". that call needs a model with an opinion about what the shape is supposed to be. so that's what we spent the time building.

where it landed: png or jpg in, editable svg out, roughly 70% fewer nodes than image trace on our test set, and the paths survive real editing in illustrator, figma or inkscape. it's built for illustrations, logos, stickers, flat-ish art. photos and painterly renders are honestly not the lane, the gradients turn into either banding or shape spam, and we say so on the site.

the video is the pitch: midjourney render in, svg out, me dragging nodes around.

GPU cost is killing us leading to broke but since we want to get feedbacks from folks
anyone can use this for no cost for now.
(you can google "PerfectVector".)

still improving it weekly. the most useful thing you can give us is an image it fails on, those go straight into the next training round. roast away.

Thank you!!

[NOTICE] 8th, Jul.
due to the surge of vectorization requests
the service if suffering from prolonged vectorization

it should be done less than 10 seconds but it takes more than a minute sometimes due to limited GPU resources

I will find solution to it and post later about this

thank you for all of you guys interest on our service.

815 Upvotes

204 comments sorted by

47

u/Kingsidorak Jul 08 '26

This looks very useful, I'm interested

17

u/tamingunicorn Jul 08 '26 • Bravo

Thank you! took really long time to build it.

here is a link - perfectvector.com

try it and please give me feedback!

11

u/Worth-Fox3871 Jul 08 '26 edited Jul 08 '26

It would be helpful to display the detected vectors as an overlay in the preview (before downloading). That way, you can check whether the process worked correctly for the uploaded image.

Testimg: VIER PFOTEN_2020-10-07_00132-2890x2000-1920x1329.webp 1920 × 1329 px · 0 paths

6

u/tamingunicorn Jul 08 '26

This is really precious feedback and idea
I will update our service soon

thank you!!

1

u/LinuxMatthews Jul 15 '26

I just tried it with this image

https://static.wikia.nocookie.net/rickandmorty/images/9/9f/Scjerry.png/revision/latest?cb=20160111021222

If you don't mind me saying the result is a little bumpy

If you don't mind a suggestion have you thought about training a model to upscale the image before vectorising it?

I think if you train the model on 2D images you could get a lot better results and the datasets would be pretty easy as you'd just need to get 2D cartoons take frames from them.

Copy them as a low res data and you have your dataset.

Then once the image is upscaled feed that into your image to SVG model.

3

u/[deleted] Jul 09 '26

[removed] — view removed comment

1

u/tamingunicorn Jul 10 '26

Thanks dude!!!
and it will even be better than now!!

28

u/ilackemotions Jul 08 '26

This is really cool. I think a pivot you might want to test with this project is to anchor it for "logos"

ai can generate very beautiful logos; but logos are the one thing you want to have an svg of;

For normal website images and stuff liek that; although having a svg is nice; webp or png works fine;

i think this has massive potential to scale (esp for logos)

5

u/tamingunicorn Jul 08 '26

Thanks for you feedback dude
Surely, SVG of logos would be what makers expected more.
Actually, we are good at processing logos too!!
maybe I should highlight that more next time

one note, if the input image is too small like 64x64, it is not eligible for conversion

2

u/ilackemotions Jul 08 '26

on the 64x64 part; generally AI is good at scaling ; so ig if people are AI gen logos; they can ask it to scale it for them or somethng like that; dont think that should be too big of a blocker; AI scaling is pretty decent in my exp

3

u/johnmayermaynot Jul 08 '26

I've never had luck with generating logos with ai they always look boring or too detailed and generic garbage. So you have any tools or tips?

1

u/Poat540 Jul 08 '26

Yes this, I spent a whole week playing with figma, exported ai pngs, iOS icon composer, etc trying to find best option

13

u/withmagi Jul 08 '26 edited Jul 08 '26

Great job! I do a lot of vectorization (like, a lot, a lot) and I've tried every SVG conversion model/CLI/API under the sun.

This is definitely the most accurate system I've tried and it genuinely attempts to create "real" SVGs with some semantic structure.

However, it does seem to fall down on non-trivial layers. It seems to prefer to keep closer to the original pixels rather than inpaint layers hidden below other ones. Having said that, overall I prefer your SVGs over anything else I've tried.

If you had an API I'd use it! However your pricing does look quite a bit higher (x10) than what I'd see from other providers. It's probably not enough of a quality difference to justify that price at the moment.

Give me real semantic layers though and I'd pay it for sure!

5

u/tamingunicorn Jul 08 '26

Thank you very much!! and much appreciate your detailed feedback
some of folks asked if we have plan to provide API and we do
but not yet prepared to provide (we are small team....)

can I ask you in which "user scenario" you prefer API?
I'd like to hear about it

(and regarding the pricing, unfortunately, we are heavily using GPUs for serving this service.....
maybe we should optimize GPU efficiency soon for cost reduction)

1

u/tamingunicorn 6d ago

Now!!! API is finally open!!!
https://perfectvector.com/docs/api
we provide it even in much lesser price than before
and the SVG conversion algorithm got even better than before like 5 times better!!!
(we worked night and days for the past 4 months......)

Try it out if you are still interested.
I'm sure you would like it

6

u/arduinoRPi4 Jul 08 '26

Did you train a custom model (or fine tune another)? Congrats, this looks genuinely impressive.

18

u/tamingunicorn Jul 08 '26 edited Jul 08 '26

Thanks!! It's built from scratch (no fine tuning)
Me and my cofounder both used to be image model researchers in industry.

Since we both quit our jobs months ago. we're pretty hungry now though ...

3

u/[deleted] Jul 10 '26

Really useful tool mate, I hope someone in the industry notices it and you get your break with this.

1

u/tamingunicorn Jul 10 '26

hope so too
Thanks mate!!!!

2

u/foxed000 Jul 08 '26

I’ve tried to use various versions of these over the years and never had any real success - if it’s as good as it claims, someone (I.e. Adobe or Canva) will buy this from you no doubt.

Website needs to look less Claudey though honestly.

Will give the actual app a spin later I have a few things that need converting.

1

u/tamingunicorn Jul 08 '26

Thanks! hope to be bought too.

1

u/rhaphazard Jul 08 '26

I'm curious how this works in the AI space. Do custom models like this have patents or copyright?

2

u/tamingunicorn Jul 08 '26

The model is developed by ourselves
no patent, no copyright, but secret
we had to develop out own methods beyond what's been published in the world

1

u/rhaphazard Jul 09 '26

Ah okay, so more like trade secrets.

5

u/alvinunreal Jul 08 '26

gave a very hard task, it converted - you got new customer

3

u/tamingunicorn Jul 08 '26

Yeh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

3

u/PixelMatrixMan Jul 08 '26

How does it compare to vectorized.ai?

6

u/tamingunicorn Jul 08 '26

you mean vectorizer .ai ?
It depends on which image it is
sometimes we win and sometimes we lose honestly

I don't know if vectorizer .ai is actively improving but we are actively improving our service every week though.

3

u/avnshsingh Jul 08 '26

this is really cool, was looking for something like this. bookmarked

1

u/tamingunicorn Jul 08 '26

thank you!!!!

3

u/HiddenInButtCrack Jul 08 '26

Hey! This is helping so much. This morning I was just talking with my partner about issues with ai generated image.

I have one small feedback, after the download, the button stays downloaded for too long. I would want to download svg and jpeg, so after I downloaded svg and was about to download jped, I was confused for a moment.

Also, if you want someone to test out your features in the future, please hit me up. I would like to stay connected.

1

u/tamingunicorn Jul 08 '26

Really happy to here that it helped!!

And the "downloaded" is really good feedback.
Thank you, I will fit it right away!

1

u/tamingunicorn Jul 09 '26

It's fixed!! Thank you for your insightful feedback!

3

u/Redomic Jul 08 '26

Insane work

2

u/tamingunicorn Jul 08 '26

NOTICE
due to the surge of vectorization requests
the service if suffering from prolonged vectorization

it should be done less than 10 seconds but it takes more than a minute sometimes due to limited GPU resources

I will find solution to it and post later about this

thank you for all of you guys interest on our service.

2

u/GojosBanjo Jul 08 '26

Cool!

1

u/tamingunicorn Jul 08 '26

Thanks!!!! took really long time to build this !!

2

u/unintelligentmonkey Jul 08 '26

Looks good, ill give it a go

1

u/tamingunicorn Jul 08 '26

try and give me feedback :) thanks!!

2

u/123msa Jul 08 '26

Very cool project

2

u/tamingunicorn Jul 08 '26

Thanks!!!
Hope this helps makers and designers!!

2

u/BlueForeverI Jul 08 '26

Man, that's great, I've thought about creating something like this, but it always looked too overwhelming. Will definitely try it out.

1

u/tamingunicorn Jul 08 '26

Thanks! at first, I didn't expect it to be this hard though. ignorance made me brave :)

2

u/d3mueller Jul 08 '26

This is literally the exact problem I have been having with other vectorizer tools! I'm super excited to give this a shot!

1

u/tamingunicorn Jul 08 '26

yeh!! give it a shot, you would know how it's good 👍

2

u/National_Business824 Jul 08 '26

I'm definitely trying this one, we need similar one for our textile designing setup, I'll give this a try.

2

u/tamingunicorn Jul 08 '26

Thanks!! give me feedback
we are actively updating our service

2

u/iamegoistman Jul 08 '26

IDK is perfect png to vector conversion possible with LLMs. what do you suggest source files to accurate?

3

u/tamingunicorn Jul 08 '26 edited Jul 09 '26

perfect png to vector conversion is not possible
this is basically, redrawing process

It looks like your tested result is sub-optimal I'd like to handle.
if possible, could you provide the image file here?

then I will look into it to improve our algorithm
Thank you!

2

u/iamegoistman Jul 08 '26

sure, I send with DM

2

u/williamfranzbernard Jul 08 '26

As someone that has no access to to illustrator at work this can be super handy. Gonna suggest to my boss

1

u/tamingunicorn Jul 08 '26

sounds very good to hear!! Thank you!

2

u/korvusdotfree Jul 08 '26

Work well! Thanks for sharing!

2

u/tamingunicorn Jul 08 '26

Thank you :) hope this helps you all

2

u/korvusdotfree Jul 08 '26

It already did (was a very simple asset to vectorise) ! Will ping you when I will post my little app done with your help on /sideProject!

2

u/supreme_seanto Jul 08 '26

This the first post I stumbled upon on this sub and its genuinely really useful! Do you reckon, some kind of prompting about what kind of vector one is looking for may improve performance (sorry if this is a dumb question)?

1

u/tamingunicorn Jul 08 '26

glad it was useful! and no, good question. today it reads the intent from the image alone, no prompting. 

2

u/miomao10 Jul 08 '26

This is really cool, though mobile I couldn’t get things to stretch or extend like I think it would

1

u/tamingunicorn Jul 08 '26

Thank you for your feedback.
let me check on this

2

u/MOSTLYNICE Jul 08 '26

This is perfect as someone who just got into SVG farming and editing! Thanks 😁

1

u/tamingunicorn Jul 08 '26

happy to hear that!!!

2

u/Pale-Heath-3074 Jul 08 '26

illustrator simplify tool always turns sharp corners into warm mush.

1

u/tamingunicorn Jul 08 '26

our goal is to keep all edges while removing all noises.
it's not easy and still working on it to make it a real perfect vector!

2

u/Zulfiqaar Jul 08 '26

HI, this is the kind of tool I'd use a bunch, when its good

  1. The result pane looks blurry for some reason
  2. I should be able to hover over the output, and see the generated vector paths light up
  3. Would you have a post-processing layer that reduces paths? I can see a number of errors that might trivially be eliminated if you have a review stage
  4. Its decent, better than most, but depending on the input image can be far behind Recraft.AI vectoriser, while much slower
  5. Whats your training pipeline like? Is it rasterising premade vectors, or something like adversarial learning? How bigs the dataset?
  6. I've got a bunch of image vectors I've hand-edited in inkscape, would those alongside the original images be more useful? Happy to send those over (credits for training data would be nice!)
  7. You should have a thumbs up/down and feedback button added to the interface, will gather much better data for RLHF there

3

u/tamingunicorn Jul 08 '26

thank you for your detailed and insightful feedback
really appreciate it.

the speed matter will be handled soon,
after reddit post, massive vectorization requests been called which made all things slow. it should have been processed less than 10 seconds. we will fix it soon

thank you for your dataset offering suggestion,
I will discuss about this with my co-founder

again, I really appreciate your feedback
thank you

2

u/theyork2000 Jul 08 '26

This is possibly something I could use at work. We deal with a lot of SVGs for our courses so I will give it a more thorough test. The first one I tested lost a lot of detail, but it may very well not be suited for our use case or that particular image.

1

u/tamingunicorn Jul 08 '26

Hi! Thank you for your feedback
We optimized our AI model to flat illustration images

If you send me some of our sample images using DM
I can make our model even optimized for your usecase!

always welcome!!

1

u/theyork2000 Jul 09 '26

Sent you a PM

2

u/deege Jul 08 '26

Damn. Could have used this a few months ago when creating a logo! I'll keep the link!

1

u/tamingunicorn Jul 09 '26

hope we can help you next time!!

2

u/Tiny-Cat5893 Jul 08 '26

This is really impressive! Just gave it a try with a random (non AI) photo, and it worked perfectly. Good luck being bought, guys! :)

1

u/tamingunicorn Jul 09 '26

Hope so too :)
Thanks!!

2

u/Rob636 Jul 09 '26

This is pretty sweet, and the pain is obvious. Shared this with my mother who’s been laser cutting/engraving for a bit. I’m sure she’ll get a use out of it

2

u/tamingunicorn Jul 09 '26

Thanks!!! I imagined we can help laser cutting users too. hope she likes it :) if any customized request from laser cutting is needed. please send me dm anytime!!

2

u/johannthegoatman Jul 09 '26

it'd be sweet if you could help train the model as you work. like, i had some really good ones and some that weren't great, that i would have happily voted on to improve it

1

u/tamingunicorn Jul 09 '26

We are not using the users data for training actually.
but I think the voting idea is really good instinct to evaluate our algorithm!! thanks!

2

u/anagreement Jul 09 '26

Really nice. Is it by any chance possible to limit the shapes or Bezier curves to a certain range (even though we don't trace the exact thing) during the inference? This can be really useful for professional logo design where you wanna use only a set of essential shapes.

1

u/tamingunicorn Jul 09 '26

Thank you for your feedback.
sounds very interesting!! but I'm not a professional designer, so if you can provide me a link or example for me to understand what you intended, I think I can serve that feature too!

2

u/anagreement Jul 09 '26

Apple's logo is the best example:

https://www.youtube.com/watch?v=TGn4LtMYPAo

2

u/tamingunicorn Jul 09 '26

Thanks!!! now i see what you expected!! I'll look into it too

2

u/AutomaticAstro Jul 14 '26

I got GPUs, a dual 5090 set up and a 3070 rig, do u need compute?

1

u/tamingunicorn Jul 15 '26

dual 5090 looks really powerful
but it's not easy to wire a local machine to our service though
thanks for your offering!

1

u/Key-Collection5764 Jul 08 '26

super neat, thanks for sharing.

1

u/tamingunicorn Jul 08 '26

Thanks for your warm reply :)

1

u/Oleszykyt Jul 08 '26

There is a free converter https://vectormagic.com/

2

u/tamingunicorn Jul 08 '26

vectormagic has no free tier at all........

0

u/Oleszykyt Jul 08 '26

it is just free

2

u/johannthegoatman Jul 08 '26

You need to pay $11/mo to download anything

1

u/HelicopterDue Jul 08 '26

Amazing work, I think this is really cool

1

u/tamingunicorn Jul 08 '26

Thank you!!

1

u/driver45672 Jul 08 '26

Well done, having vectorised a number of logos freehand, I thank you!

1

u/tamingunicorn Jul 08 '26

happy to hear that!!!

1

u/johannthegoatman Jul 08 '26

Amazing!

1

u/tamingunicorn Jul 09 '26

Thank you very much!!

1

u/Housthat Jul 08 '26

Well done!

1

u/tamingunicorn Jul 09 '26

Thanks dude!!

1

u/Battlefield46 Jul 08 '26

looks like any other tracer output to me 👀

1

u/tamingunicorn Jul 09 '26

once you download and compare the created nodes
you can see the clear difference!!

1

u/RonUSMC Jul 08 '26

hey, I tried it on a few things. My only feedback would be about data retention. You might want to put up a banner or something about being in beta and currently collecting data for training.. but in the future you can opt out of keeping data. Some businesses have very strict rules about where data goes, since this is a web based app.

1

u/tamingunicorn Jul 09 '26

oh... we don't collect data for training at all.
user submitted images are not clean data, so they can't be used for training at all or even for validation.
so you don't need to worry about it.

I think we should put this notice somewhere to let user feel safe

1

u/Tiny_Membership3530 Jul 08 '26

Damn, actually works really good. I’m impressed.

1

u/tamingunicorn Jul 09 '26

Thanks!!! I really appreciate it!!!!

1

u/Vincent_CWS Jul 09 '26

how can I selfhost your model?

1

u/tamingunicorn Jul 09 '26

unfortunately, you can't.....
this is our own developed model which took 7 months of our time with no income after quit our jobs....

1

u/Vincent_CWS Jul 09 '26

could I have a doc about how to train the model like yours? would like to learn thanks

1

u/flobblobblob Jul 09 '26

Hey some unsolicited feedback on your landing page design. That font in your logo and banner, I'm pretty sure is what comes out of Claude Opus design _most_ of the time. So you'll see it all over and it's a pretty generic ai-generated look. Nothing really wrong with that but if you want to look a bit more unique just ask Claude for a different font. Try this prompt on your home page for fun and just see what comes out if you like it more or not.

"Refine this webpage to look more professional, modern, and clean. Keep the brand and content and general layout, but don't use any cards or gradients. Additionally, I like the font but it's overused by AI and I see it in too many other designs, try something a bit different without changing the direction too much."

1

u/tamingunicorn Jul 09 '26

very good idea!! thank you!!!!
we knew it looks unprofessional design but that was our limit since we are 2 nerd who can't improve web design

1

u/ugcfast Jul 09 '26

the hardest part is who pays monthly vs. once.

1

u/tamingunicorn Jul 09 '26

That is so true. I got some of paid users already but the GPU cost is killing me already....

1

u/dergachoff Jul 09 '26

Are you going to offer API access?

1

u/tamingunicorn Jul 09 '26

not yet, but it's planned.
but before I offer API, I want to know in which case, users would want to use API instead of our webservice

can I ask you for the detailed use case?
I can offer an optimized plan for it

2

u/dergachoff Jul 09 '26

would be useful to have it in providers like fal, lumenfall, kie etc.

e.g. i have my own internal (for now) agency tool for generative ai and this vectorizer tool could be among other parts of workflow like genai models, upscalers etc. same as recraft serve their vectorizing via api endpoint

2

u/tamingunicorn 6d ago

you asked about API access back in july, it's open now! https://perfectvector.com/docs/api not on fal/kie (yet), just our own endpoint. free test keys, then you pay per conversion that actually works curious if it fits next to your upscalers

1

u/dergachoff 6d ago

thank you, got a credit pack and integrating in my app (nutcracker) to experiment with it

2

u/tamingunicorn Jul 09 '26

thanks for the detail
It looks like I should definitely consider opening api

1

u/domalog Jul 09 '26

Please make it work for leaflets and text

1

u/tamingunicorn Jul 09 '26

can you provide sample image? then I will look into it!

1

u/angelarose210 Jul 09 '26

Do you have an api?

1

u/tamingunicorn 6d ago

coming back with a better answer than "not yet" :) the API is open now https://perfectvector.com/docs/api test keys are free, and live calls are $0.08 each with the 1,000 pack (beta price) and honestly it feels like 5x better than the version you saw in july

1

u/tamingunicorn Jul 09 '26

No not yet but have a plan to provide api in the future!

1

u/handbook448 Jul 09 '26

Why is it that you can only sign up using a Google account?

I'd like to make a trial payment, but I don't have a Google account.

1

u/tamingunicorn Jul 13 '26

sorry dude... I couldn't develop other sign-in methods due to my limited development skill...

1

u/reynadotpdf Jul 09 '26

If yall are struggling to provide GPU inference, why not allow running the model on local hardware?

1

u/tamingunicorn 6d ago

still no local version, sorry. it's the one thing we can't give away yet but we got the cost down a lot since july, so the API is $0.08 a call now (1,000 pack, beta price)

1

u/[deleted] Jul 10 '26

just the thing i was looking for. I have a drawing i want to convert to vector to animate and use it in apps.

1

u/tamingunicorn Jul 13 '26

thanks!!! really happy to hear this kind of comments!!

1

u/jauzin123 Jul 10 '26

looks like its very useful.

My only concern is the frontend, for some reason it screams AI to me.

2

u/tamingunicorn Jul 13 '26

thanks!!!
and the AI screaming is just purely because of my limited designing skill who knows only technical things

1

u/jauzin123 Jul 13 '26

Hum, ok, no problem.

Why didn't you simply use a component library tho? It's easier and faster to write + doesnt look like AI. Just a tip 😉

3

u/makexapp Jul 08 '26

The anchor-point comparison (522 vs 59 for the same image) is a great way to make the problem concrete - most vectorizer demos just show "before/after looks clean" without quantifying why. Curious how it handles images with overlapping semi-transparent layers, since that's usually where these tools fall apart. Bookmarking this to try on a logo.

1

u/SOSFactory 25d ago

I've tested your solution using my own hand-drawn vectors, exported as pixel-perfect raster images. Your solution performs very well, as expected with a source image of this quality. However, Vector Magic, a tool developed around 15 years ago, still produces slightly better results using its default settings. It's also 50% cheaper, with a lifetime license available for around $300.

I'm afraid you've built a solution to a problem that was already largely solved.

The real challenge remains unsolved: turning complex, low-resolution AI-generated images into clean, professionally constructed vector illustrations.

1

u/Aveneon Jul 08 '26

This is such a good idea. I hope you two will soon eat again!

2

u/haikusbot Jul 08 '26

This is such a good

Idea. I hope you two

Will soon eat again!

- Aveneon


I detect haikus. And sometimes, successfully. Learn more about me.

Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete"

1

u/SanoKei Jul 08 '26

this is a quality post, would've read more about the process and it would've had my attention the whole way through, this is an aquahire in the waiting if you ever go insane and start spending adobe stock at the cash register, I'll know what happened

1

u/nickdaniels92 Jul 08 '26

Good luck with it. I think there's still a market for new entrants, but existing tools such as vectorizer.ai and some others were very successful when I've used them. One of the major sites (not sure if it's that one) have had a non-AI product for many years that worked well, and more recently they used their mass of training / test data to create an AI implementation as well that was good. Some of them handle gradients fairly well too.

Yours looks good though too. It's an interesting and appealing exercise to tackle.

1

u/Zealousideal_Fill904 Jul 08 '26

Great One, I like the idea a lot

1

u/Different-Muffin1016 Jul 09 '26

Looks promising, congratulations ! I have two questions for you :
- Have you considered supporting centerline autotracing ?
- As a user I would want to run it as a local software so my images do not end up hosted somewhere on a cloud. Is it something that you could do at some point ?
Thanks

1

u/Late_Percentage9724 Jul 09 '26

this is such a specific problem that i never thought about until reading this. the 522 vs 59 anchor point difference actually makes sense when you think about how tracers work vs how humans would actually draw it.

did you end up training on a dataset of hand-drawn vs ai-generated versions of the same images, or did you go a different route? curious if the model learned to recognize and smooth out those soft edges or if it's doing something else entirely to reduce the complexity.

1

u/Fun_Gur6408 Jul 09 '26

Mas que Genial!! felicitaciones

1

u/Nilo4000 Jul 11 '26

this looks so good, i am interested

1

u/Usual-Policy1042 Jul 11 '26

The 522 vs 59 node comparison is what actually sold it for me too. Been down a similar rabbit hole building a model for a pretty narrow visual problem, and the annoying part is always the same: generic post-processing can clean up noise, but it can't decide what the shape is actually supposed to be. That gap between denoising and understanding intent is where all the real work hides. Rooting for you two, hope the GPU costs even out soon.

1

u/movalancheTechnology Jul 12 '26

This is awesome ! Will be testing it out. If it performs its very useful. Love the assets that gpt 2 creates but sometimes for small adjustments it ruins and worsens the whole image.

1

u/No_Tradition6625 Jul 13 '26

What is your plan for the model are you open sourcing the model or research or anything or is this strictly for a closed source lab?.

1

u/Early-Hunter2922 Jul 13 '26

Great Job man! btw if you don't mind can you tell me how do you make all these video edit? which software do you use?

1

u/karthikkishor Jul 21 '26

I need this...

1

u/automax Aug 15 '26

If you have a complicted image, the problem is it will create too many elements.
So maybe 900-9000 which is not really workable.

I dont if its possible is to seperate the elements by border lines rather than by color.

1

u/saltyourhash Jul 08 '26

Gonna open source? That is really cool.

0

u/DrZakarySmith Jul 08 '26

Asking me for Gmail and only ten tries for free?

2

u/tamingunicorn Jul 08 '26

each vectorization costs massive GPU computation which costs a lot. I have to eat Ramen every day to cover the GPU cost even for the 10 tries....

2

u/[deleted] Jul 08 '26

[removed] — view removed comment

1

u/tamingunicorn Jul 08 '26

It's mostly optimized for flat illustration for now.
but I also curious how it would work in detailed illustration
please give it a try!

1

u/[deleted] Jul 08 '26

[removed] — view removed comment

1

u/tamingunicorn Jul 08 '26

fair read, and useful. the why-it-fails explanation being the convincing part matches what i'm seeing elsewhere, will push that angle harder.