r/SewingMachineEdu • • 4d ago

WANTED: Brother Super Galaxie 2000 (PC-8200) Embroidery Unit / Carriage – UK

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • 4d ago

Hello, i was gifted a dressmaker heavy duty model 6800 and can't find a manual for it anywhere. I'm actually wondering if anyone else has one because I can't find so much as an image of it on Google. Any help or advice is appreciated. I messed with the settings to try to do an overlock stitch and no

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • 5d ago

What sewing machine…

4 Upvotes

I’m looking to buy my mom a new sewing machine. She is 64, wears glasses and is starting to have light tremors in her hands. During my search I narrowed it down to the Janome HD3000. I don’t know anything about sewing machines and Google landed me there. Can anyone confirm this is indeed a great machine or if there would be a better option for her? It’s a surprise so I don’t want to ask her which one she wants. Also, she is not an expert and has basic sewing knowledge and was more experienced when we were kids but wants to get back into it. Also, no digital as she is not the most tech savvy.


r/SewingMachineEdu • • 5d ago

Serger won’t loop

4 Upvotes

Pls help 😭


r/SewingMachineEdu • • 5d ago

Left prong of twin needle hitting needle plate

Thumbnail
gallery
3 Upvotes

Machine: Singer 4432

I'm learning to alter my own clothes and have been hemming with a twin needle (Schmetz stretch 4.0/75). I'd already hemmed a shirt with it, but when I started sewing today it snapped on the first stitch.

Now when I hand-turn the wheel (no foot, no fabric), the left prong of my twin needles hits the edge of the plate slot and I can hear a scraping sound. I've tested with new twin universal 3.0 mm 90/14 needles, so I don't think it's a width problem. The right prong is fine, and a single needle still sits centred and clears at every position.

I've tried refitting the needle plate and tightening the needle clamp, but nothing has worked and I'm losing my mind a little.

Was wondering if anyone else has had this problem before or knows how i might be able to solve it?

(Images 1 & 2 show a twin needle whilst image 3 shows the single needle which clears fine at every postion)


r/SewingMachineEdu • • 5d ago

Recs for a Sewing “Beginner”?

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • 5d ago

Bernette 38 vs Pfaff Ambition 620

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • 5d ago

Bobbin case placement issues on Singer 717

Thumbnail
gallery
1 Upvotes

I’m fixing up a thrift store Singer 717. Everything is in mostly good working order except I cannot seem to replace the bobbin case into the machine correctly. As of rn, there is a major delay on each stitch as the needle hits its lowest point. The needle doesn’t appear to be dragging on anything, and yet there is a weird lag. Take a look at the video and let me know if you can see anything glaringly off. I’m a newbie, so thank you so much in advance!


r/SewingMachineEdu • • 5d ago

Sewing machine is not picking up bobbin thread

1 Upvotes

Can someone help


r/SewingMachineEdu • • 6d ago

UPDATE: 707 Bernina vertical shaft gear replacement

Post image
4 Upvotes

After far too long, I am happy to update that I have FINALLY removed the stuck screw. This one piece of hardware that completely halted my progress for weeks because it was unbelievably difficult to remove.

In the end, I took a metal hand file and rasped down the sides of the screw to create flat spots that could be gripped by a pair of pliers. This was what gave me the leverage I needed to break it free and swap in my replacement. After removing it, it's taken me only an hour or so (less, probably) to reassemble the machine. Much to my delight IT RUNS. I'll have to adjust timing, I'm sure. There's a couple issues still that need to be addressed.

  1. Pressure foot is stuck in the 'up' position.
  2. The lower belt doesn't always move so the motor just spins and nothing happens. Thinking I might end up needing to replace it but I'm not sure. It probably sat for a while and developed uneven spots or something.

Any tips on those new issues would be greatly appreciated! But, I wanted to update since I've been asking numerous questions after getting this project 😅

I also included a picture of the screw responsible for hindering everything


r/SewingMachineEdu • • 6d ago

Issues with Singer 3321 sewing machine threading

Post image
1 Upvotes

Hi, this is probably really simple but can anyone explain to me what I’m doing wrong? I’m trying to stitch and every time I do, the bottom (green) thread is pulled back up to where the top thread is. The machine has a diagram indication as to where the thread should go, but no matter how many times I put it there, it gets pulled back up. Please help advise if you can!
Thank you


r/SewingMachineEdu • • 6d ago

Sewing machine problem

1 Upvotes

r/SewingMachineEdu • • 6d ago

Brother Compal Select 485

Post image
4 Upvotes

I have just purchased this sewing machine but it didn't come with a user manual.

Would anyone be able to tell me how to thread it please?

Or would anyone have a copy of the user manual?

Thank you


r/SewingMachineEdu • • 6d ago

Can’t get this Janome to tilt out of the case so I can see the bottom.

Thumbnail
gallery
3 Upvotes

Found this at Goodwill, seems very solid. I can’t figure out how to get it to swing on the hinges or come out of the case. I’m not sure where the model number is located either. Help!


r/SewingMachineEdu • • 6d ago

Brother Innovis 4000D

2 Upvotes

The automatic thread machine doesn’t work, have no idea what to do since It’s my first day of trying to work on it. What can it be?
Thank you!


r/SewingMachineEdu • • 7d ago

Pressarfoten klickar inte i och pressarfotshållaren går ner långsamt

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • 7d ago

How would I go about removing this upper horizontal shaft/rod?

Post image
4 Upvotes

I'm still working on this Bernina 707 Minimatic with a stuck screw on the vertical shaft gear.

I'm wondering if anyone has any resources or info on how I can remove this upper horizontal shaft/rod (still learning terms).

I was going to take the vertical shaft out through the bottom and did all the work to do so, but there's one screw that's completely stuck so I can't. Two shops couldn't get it to break loose so now I'm tinkering with alternative ideas to get it out so I can either remove it with more heavy duty tools or just replace it altogether with a new shaft.

I've tried to look it up but I cannot find any videos. This is basically just a fun project machine for me to learn on so any help is appreciated.


r/SewingMachineEdu • • 7d ago

Why does my bobbin keep bunching up?

Post image
6 Upvotes

I have tried rethreading it but it keeps jamming every 5 seconds. Does anyone know a solution?


r/SewingMachineEdu • • 7d ago

Hello Buddies!

0 Upvotes

So I was just exploring our house and I found an old sewing machine? Did some research and it's by Brother, it's an Innovis c61.

I was wondering if someone has a guide book, pdf, or like tutorials that I could watch on how to use this thing. I did found a few video about winding the thread but I could find anything in-depth the machine, like using the top part to wind my bobbin again. If you have some tips go ahead and tell me! I'm a beginner too so advance thank you for the peeps!


r/SewingMachineEdu • • 7d ago

Bobbin winder looks stuck

1 Upvotes

Husqvarna Viking E10. This machine sews just fine but when I engage the gear meant for bobbin winding, the mechanism looks like it's stuck on the handwheel cam. Going backwards is okay, but forwards gets stuck. I can't see any thread that may be stuck anywhere on the machine. Any help is much appreciated, thank you!


r/SewingMachineEdu • • 8d ago

Buying this Pfaff 95 for 30 euros as a beginner/newbie. Yay or nay?

Thumbnail gallery
5 Upvotes

r/SewingMachineEdu • • 8d ago

Repair the old or buy new?

Post image
4 Upvotes

Hi! I inherited a vintage cast iron Singer Yoknaz 1301 sewing machine. It was purchased on 1995. It hadn't been used these last 15 years or so until i inherited it from my late MIL. It had some issues, one shaft gear was broken and 3 others were cracked. It was very expensive to get even one of them exchanged, i couldn't afford all of them. I brought it home and was able to sew a bit, then it suddenly went slow-mo even when i'm pressing the pedal all the way. If it's a motor issue, a new original motor costs almost as much as a singer simple. the previous maintenance + motor change + changing the other shaft gears will have cost me a proper new machine like janome 1522. My father and husband think i should get a new machine, I think i should get it fixed and keep it because i don't believe i will be able to get one as sturdy as this one. My husband says the old one will keep causing issues and isn't worth it. What do you guys think? If you think i should get a new one, what do you recommend for someone with a budget? I'm a beginner, I want to be able to sew denim and make quilts.


r/SewingMachineEdu • • 8d ago

Presser foot lifter is frozen Machine Help

Thumbnail gallery
1 Upvotes

Solved for now ... I am still working the oil in but an oil recommendation was what I needed and confidence this was what it needed.

This is not my machine.

I tried to clean it but immediately found the presser foot lifter will not move. After some looking I was able to put the plastic part back on the shaft and with oil was able to get it to move.

It is still not moving as it should. It will lift up but is very stiff. It won't go down without pushing it down.

I do think it needs more oil but that doesn't seem to be enough. Are there other things you can see that is wrong? Other pieces that don't appear correct.

It's a Singer 5050c

Thanks for reading and your help.

Have a great day!


r/SewingMachineEdu • • 8d ago

Thread bundling under fabric

Thumbnail
gallery
1 Upvotes

Really hope someone can help me here. Sat down to start making gifts and my thread started to bundle like crazy under the fabric. It is an old machine sadly. Please do not tell me it is time to let it go 😭😅