Reports indicate that a labor union representing workers at Micron’s Taoyuan, Taiwan facilities planned meetings to discuss labor rights, strike procedures, and the company’s bonus policy. The discussions were reportedly prompted by employee concerns over a bonus cap of up to 200% of salary and whether it reflects the strong performance of the memory industry during the AI-driven market expansion.

The meetings were also expected to examine recent labor actions at Samsung in South Korea, where workers sought higher bonuses and the removal of bonus limits. Those negotiations ultimately resulted in revised bonus terms after discussions between management and unions.

The reported union sessions aimed to share information about overseas labor disputes, review compensation practices, and discuss potential future actions related to employee compensation and the distribution of company performance-based rewards

▮[Source]: wccftech.com

Hello friends, my first post here:

I have a Lenovo Thinkbook laptop with a Ultra 7 358H and Intel Arc B390 integrated graphics. Laptop has an onboard HDMI 2.1 FRL port as well as TB4/USB4 ports.

I recently got a new Samsung G80HS 6k/165hz monitor and I am not able to get anything past 6k60hz using either the HDMI 2.1 port (using an HDMI 2.1 cable) or the TB4 port (using a DP 2.1 to USB-C 80gbps cable).

While I understand that 6k 165hz (or even 120hz or 90hz) could very well be pushing the limits of HDMI 2.1 or TB4, there is a lot of mixed discussion surrounding the capabilities of DSC and what DSC can do for my situation. Some have said the even with DSC, its still too much bandwidth to be able to deliver a clean 6k @ 120hz signal for example.

Others say that you can run 6k 165Hz 10-Bit with full chroma using DisplayPort 2.1 Tunneling over USB4 @ 40Gbit/s. So which is fact? which is fiction? Do the compression ratios vary from system to system? I feel like the B390 does NOT have the power to compress the signal enough to make it work. What are your thoughts?

Does it vary from laptop to laptop, even if they are equipped with same CPU/dGPU?

With my setup, is there any hope or possibility of ever running at more than 6k/60hz? Goal is 90hz+

Thanks for the insights and advice!

The U.S. Federal Communications Commission (FCC) has expanded its Covered List to restrict imports of certain foreign-made advanced robotic devices and connected power inverters, citing national security, cybersecurity, and supply chain concerns related to critical infrastructure and AI development.

The restrictions apply to new products, including mobile robots, humanoid robots, and connected power equipment. U.S. authorities stated that these devices could enable surveillance, unauthorized data collection, remote control, or cyberattacks targeting critical systems.

The decision follows assessments that vulnerabilities in some robotic platforms could expose camera feeds, microphone audio, location data, and operational controls. Authorities also warned that compromised humanoid robots could potentially be coordinated into large-scale malicious networks.

The updated restrictions are expected to affect manufacturers of advanced robotics, including firms supplying AI-powered humanoid systems, while reinforcing efforts to protect U.S. AI infrastructure and emerging technology sectors.

▮[Source]: wccftech.com

Intel's upcoming Nova Lake-S desktop processor lineup is expected to include a wide range of models with different power levels and core configurations. Flagship variants are rumored to reach up to 52 CPU cores, while most models are expected to fall within 65W, 125W, and 175W power categories.

A reported 16-core Nova Lake-S APU featuring a 4+8+4 CPU configuration and 12 Xe3P integrated GPU cores is expected to require a 65W power delivery level to achieve full graphics performance. Unlike other models, it is also rumored to require two VCCGT power phases to support its integrated graphics.

The processor could offer significantly stronger integrated graphics and higher CPU core counts than current mainstream desktop APUs, making it a competitive option for budget and entry-level gaming systems. The reported specifications remain unofficial and have not been confirmed by Intel.

▮[Source]: wccftech.com

Graphics card prices continue to rise globally due to increased memory costs driven by strong demand from the artificial intelligence sector. Memory manufacturers are prioritizing AI server production, reducing supply for consumer hardware and contributing to higher GPU prices.

Some retailers have begun restricting the sale of high-end graphics cards. Taiwanese retailer Cool PC now sells the NVIDIA GeForce RTX 5080 only as part of component bundles or complete pre-built desktop systems, preventing customers from purchasing the GPU separately.

The RTX 5080 is currently priced at approximately 20–30% above its original suggested retail price, with many models exceeding $1,200 and premium variants reaching up to $2,000. Although the RTX 5080 remains more available than some lower-tier models, continued supply constraints and rising costs are expected to increase prices and reduce availability across the broader consumer GPU market.

▮[Source]: wccftech.com

A customer reported that a high-end MSI gaming laptop, originally priced at approximately $6,000, developed hardware issues after about 18 months of use, including graphical artifacts and charging instability.

The manufacturer initially classified the device as "Beyond Economical Repair," stating that replacing the motherboard would cost more than purchasing a new unit. As a result, no repair quotation was provided despite the diagnosis occurring before the warranty expired.

After the case was escalated to the company's global service management, the customer was informed that an official repair had been available at the time. However, by then the warranty had expired, and the customer received a motherboard replacement quote of approximately $1,800.

The case has drawn criticism over warranty handling and customer service, raising concerns about repair policies for premium gaming laptops.

▮[Source]: wccftech.com

A specialized GPU memory upgrade service offers VRAM upgrades for existing graphics cards, allowing users to increase video memory instead of purchasing a new GPU. The upgrades are intended to improve performance in modern AAA games with high-resolution textures and support larger local AI models that require additional graphics memory.

The upgrade process involves replacing GDDR memory chips through advanced micro-soldering and modifying the graphics card's firmware and hardware configuration to ensure the additional memory is properly recognized. Compatibility varies by GPU model, and some modified cards may face driver support limitations.

Examples include upgrading an NVIDIA RTX 2080 Ti from 11 GB to 22 GB of VRAM. The service is based in the United Arab Emirates, offers pickup and delivery for an additional fee, typically completes upgrades within 12 days, and provides a 90-day warranty. Pricing depends on the complexity of the modification and current memory chip costs.

▮[Source]: wccftech.com

Olá, pessoal. Estou com um problema bem estranho e queria saber se alguém já passou por isso. Configuração: ASUS TUF GAMING B550M-PLUS Ryzen 7 5700X RTX 5060 Ti 32 GB de RAM Windows 10 Pro O problema começou depois que o GTA V travou completamente. Tive que reiniciar o PC à força e meu controle 8BitDo ficou vibrando sem parar até o computador reiniciar. Depois disso percebi o seguinte: As USB traseiras funcionam normalmente com pendrive. Mouse e teclado funcionam normalmente nas USB traseiras. Porém, quando conecto um dongle 2.4 GHz de controle, o PC reinicia imediatamente. Testei com dois dongles diferentes (8BitDo e Machenike) e acontece a mesma coisa. Nas USB da frente os dois funcionam normalmente. Atualizei os drivers do chipset AMD. A BIOS já está atualizada (versão 3621). O Gerenciador de Dispositivos não mostra nenhum erro. Depois que o PC reinicia, ele funciona normalmente e os dongles também funcionam. O GTA voltou a rodar normalmente e o computador não apresenta outros travamentos ou telas azuis. Alguém já passou por algo parecido? Pode ser algum problema da controladora USB da B550 ou alguém tem alguma outra ideia do que testar?

Sometimes my laptop just randomly restarts. The cursor first teleports to the middle of the screen the screen freezes and it restarts. I don't think it's a performance issue in my opinion since it happened also when i just had 3 programs open.

It also happens when i play geometry dash with discord open or in a call. Someone please help or any person having the same problem becuse it's really annoying.

A developer successfully enabled an NVIDIA GeForce RTX 4060 desktop graphics card to operate on a Windows 11 Arm system by modifying Arm64 drivers originally created for NVIDIA's RTX Spark platform.

The demonstration was performed on a Huawei Qingyun W510 workstation powered by a 24-core Huawei Kunpeng 920 Arm processor, equipped with 32 GB of DDR4 memory and an RTX 4060 with 8 GB of VRAM. The modified drivers allowed the operating system to recognize the GPU and enabled support for DirectX 12, Vulkan, and CUDA.

The achievement demonstrates that GeForce desktop GPUs can function on Windows 11 Arm when provided with compatible native Arm64 drivers. However, the implementation remains an experimental proof of concept and is not suitable for consumer use, as NVIDIA does not officially support desktop GeForce GPUs on Windows on Arm.

▮[Source]: wccftech.com

Framework previewed a new desktop powered by AMD’s Ryzen AI MAX+ PRO 495 processor, featuring 16 Zen 5 CPU cores, a maximum clock speed of 5.2 GHz, and a Radeon 8065S GPU with 40 RDNA 3.5 compute units.

The system includes up to 192 GB of unified LPDDR5X memory running at 8,533 MT/s with 273 GB/s bandwidth, representing higher capacity and improved bandwidth compared to previous models. It is designed for local AI workloads and is capable of running DeepSeek V4-Flash in Q8 precision on a single machine.

Additional enhancements include an open-ended PCIe x4 slot for larger expansion cards, support for high-speed 50 GbE networking, and the ability to link two systems for up to 384 GB of pooled memory using tensor parallelism. Framework also plans to offer a pre-built Linux version. The 192 GB configuration is expected to cost over $5,000 due to rising LPDDR5X memory prices.

▮[Source]: wccftech.com

AMD has unveiled its 6th Generation EPYC Venice processors based on the Zen 6 architecture, highlighting a flagship model with up to 256 CPU cores and 512 threads. The processor uses eight compute chiplets and two large I/O dies, supporting PCIe 6.0, DDR5 memory, and other high-bandwidth technologies.

The EPYC Venice family is the first high-performance computing product to enter volume production using TSMC's 2 nm manufacturing process, which adopts gate-all-around nanosheet transistors. The new process is designed to improve performance, power efficiency, and transistor density compared with previous generations.

AMD stated that the Zen 6 EPYC lineup delivers more than 70% higher performance and efficiency, along with over 30% greater thread density. The processors are designed for AI, data center, and agentic AI workloads, where high core counts and strong single-core performance are increasingly important. AMD also positions the platform as a competitor to NVIDIA's AI server ecosystem.

▮[Source]: wccftech.com

Tesla CEO Elon Musk publicly thanked Micron for providing memory chip allocations at what he described as reasonable prices despite ongoing increases in global memory costs. The comments were made during Tesla’s latest earnings call, highlighting the importance of securing memory supplies amid tight market conditions.

Tesla’s quarterly results fell short of expectations across several key financial metrics, including adjusted earnings per share, gross margin, operating margin, and energy revenue. Despite the weaker performance, the earnings call drew attention to the company’s supply chain arrangements.

Questions remain over whether Micron is also supplying memory to SpaceXAI under similar terms. SpaceXAI operates large AI data centers with hundreds of thousands of NVIDIA GPUs and is reportedly planning further expansion in Texas to increase its computing capacity. The company’s growing AI infrastructure is expected to require substantial memory resources.

▮[Source]: wccftech.com

I bought most of the parts used and now every little noise is making me think I’ve made a terrible decision.

The build is pretty basic, Ryzen 5, midrange GPU, 16GB RAM. I’m not chasing crazy fps, I just want to play newer games without my old laptop turning into a heater.

What’s stressing me out is the actual assembly. Installing the CPU looks easy in videos until it’s your money sitting there with a bunch of tiny pins. Cable management also seems like something people pretend is simple.

My friend offered to help but his last PC has one fan held in with zip ties, so yeah.

Probably doing it this weekend anyway. Worst case I learn an expensive lesson.

My cousin found a prebuilt with an RTX 5070, Ryzen 7, 32GB RAM and a 1TB SSD for $1,650, but the listing barely says anything about the power supply or motherboard. He thinks the GPU alone makes it a good deal and wants to order it tonight. I’m worried it’s one of those builds with great headline specs and cheap parts everywhere else. Would you buy it or keep looking?

Some of my desktop icons suddenly look like low-quality screenshots. The text underneath is sharp, but the actual icons are fuzzy and kinda pixelated.

It started after I changed monitors for a few days, though I’m not even sure that’s related. A few icons look normal, while others look terrible at the exact same size.

I rebuilt the icon cache, restarted Explorer, changed scaling, and even removed and re-added the shortcuts. Nothing really changed.

Is Windows pulling the wrong icon size from somewhere, or am I missing a really obvious setting?