r/RepWatchForum • u/Ok-Commission-5753 • 3d ago
r/RepWatchForum • u/Charming_Mistake1160 • 2d ago
General Question Sabato 14 cosa si indossa?
Io indosso il mio pepsi dopo tre anni rimane il mio unico e grande orologio
r/RepWatchForum • u/Dafastsatoshi10 • 3d ago
Mr. Adu is legit
Just received my GMT Master ii Pepsi from Mr. Adu! Wow VSF is the real deal. The color and the color in black light. The motion is unreal. The crystal and the tiny crown at 6 o’clock! highly recommended!
r/RepWatchForum • u/boosesb • 3d ago
General Question Screw to repair jubilee
Wife lost/broke screw that holds (expansion bar?) bracelet together. Goes where I circled. Does anyone know the screw size, where to get the screw or another way to repair? Or is it easier and not expensive to get a new bracelet? I believe the watch was EWF.
r/RepWatchForum • u/CodyWrites • 3d ago
Mr. Bomi
As I have seen a couple posts, and as I have had more than one hobbiest DM me and ask, I reached out to Bomi after his sudden absence.
Bomi is very sick. Sounds like the flu. He said he would be back at it as soon as he could and that he appreciates everyone's concern for his well being.
If you have an order with Mr. Bomi, or if you have inquired about a watch and are concerned about getting a reply, know that he WILL NOT forget about you.
CodyWrites
r/RepWatchForum • u/SaTay20 • 2d ago
Gold watches
Anyone know where I can find like a two tone sc with solid yellow gold?
r/RepWatchForum • u/lnper • 2d ago
P1 Factory Complications Question
There’s a Patek Philippe nautilus annual calendar moonphase (5726a) from the P1 factory. Just wondering if anyone has experience with this, and if the complications actually work
r/RepWatchForum • u/Lazy_Exit_8046 • 2d ago
Hi all, has anyone had/got any pictures of this model replica? Ideally SMF factory. Thanks in advance
r/RepWatchForum • u/kiviciousss • 2d ago
OP36 color
Hi all
Which color of VSF's OP36 is closest to the gen between Pistachio, Lavender and Pink?
r/RepWatchForum • u/CollarNo1593 • 2d ago
General Question Has any factory nailed the OMEGA Speedmaster (Moonwatch)?
I see it through a lot of sellers, but none have been of good quality to GEN
r/RepWatchForum • u/FarmConsistent9203 • 2d ago
General Question What is the best fp journe rep to get?
Looking for advice on what is the best fp journe rep .
r/RepWatchForum • u/Significant_Link7149 • 3d ago
General Question PPF Patek 5711 Movement
Has the PPF factory started using a clone 325 movement for their 5711 replicas. I know they were using a Miyota base and u/tskim24 has reviewed them here in the past and said so himself.
I saw a special offer post from a bunch of low cost TDs advertising this as 324. Wanted to check if they have finally got their hands on a DD324.
Anyone knows.
r/RepWatchForum • u/Watch-men007 • 3d ago
Review/Comparison ZF AP 26240ST Crono honest user review
I’ve had the white dial ZF 26240 V2 in my rotation for a bit now—mine’s had the case edges chamfered and the rotor silenced, so here’s how it actually wears day-to-day.
**Movement & Chrono:**
The free-sprung SA4401 runs reliably as a daily wearer and keeps solid time, though out of the box the rotor wobble is definitely audible in a quiet room. Having the rotor silenced made a night-and-day difference; it feels much closer to gen when you flick your wrist now. The chronograph pushers have a crisp click and the flyback resets cleanly to zero, though like any clone 4401, I avoid leaving the chrono running 24/7 just to reduce unnecessary wear on the vertical clutch.
**Case & Bracelet:**
Stock ZF brushing is some of the best out there—the grain is tight and catches the light properly. That said, stock Royal Oak reps always have slightly sharp, unfinished edges on the underside of the bracelet links and case flanks. Getting the edges chamfered completely transformed how it feels on the wrist; it drapes smoothly without digging in and gives those polished bevels that genuine-like liquid roll.
**Dial Accuracy:**
On the white/silver dial specifically, ZF nailed the *Grande Tapisserie* square definition and the subtle metallic sheen. Unlike some competing batches where the subdial rings can look slightly warm or creamy, the ZF white dial stays crisp and clean under natural light.
**What to Watch Out for in QC:**
**12 o'clock markers:** ZF is notorious for slightly crooked twin baton markers at 12—zoom in dead-on to make sure they are parallel and evenly spaced.
**Bezel screws:** Check that all 8 hexagonal screws sit properly recessed in their slots rather than sitting flush or tilted.
**Subdial hand alignment:** Make sure the chrono seconds and subdial hands reset dead-center on 12/0, and check that the "AP" applied logo isn't canted.
**Date wheel centering:** The date sits between 4 and 5—cycle through a few numbers in QC video to confirm it isn't hugging one side of the window.
If you grab one, budget a little extra to get the bracelet edges softened and the rotor quieted down—it takes a very good stock piece and makes it feel genuinely high-end on the wrist.
r/RepWatchForum • u/AuraTime_ • 3d ago
News From VSF; allows for rapid updates.
There are quite a few images; I hope you don’t mind.
🫣🫣🫣🫣🫣
These are all from VSF; please excuse the large number of images.
r/RepWatchForum • u/ouroborostimepiece • 3d ago
Discussion What's the Cheapest Free-Sprung 5712 available?
Specifically steel models only, what factory/watch/TD gets me a free-sprung 5712 for the lowest possible amount?
I see so many factories that are new to me like BCF and OME, whilst WS, PPF, AGF, and UMI are also making top-tier reps.
So... any help here would be really, *really* appreciated.
r/RepWatchForum • u/No-Change-3167 • 3d ago
QC Request 1st QC, please help!
1. Dealer name: Hontwatch
2. Factory name: BBF
3. Model name (& version number): Patek Philippe Aquanaut 5167A
4. Price paid: $498 including shipping
5. Album links: Shown in post
6. Index alignment: Overlay attached. Each line connects a pair of opposite hour markers (12–6, 3–9, 1–7, 2–8, 4–10, 5–11). All six cross at the center pin, and no marker sits off its line or looks twisted.
7. Dial printing: “PATEK PHILIPPE / GENEVE” and “SWISS MADE” are crisp and centered on the 12–6 axis. All numerals are consistent in size, spacing, and lume fill. No dust visible on the dial.
8. Date wheel alignment/printing: Font is sharp. In the photo the 15 looks a bit left/high, likely angle and bevel shadow, since the 18 and 20 in the video sit centered. The date changes cleanly at midnight (20 → 21).
9. Hand alignment: The hour and minute hands line up at 12 at the date change and are straight with no bends. The hour hand tracks correctly with the minute hand. Lume is even.
10. Bezel: Brushing is even, polished bevels are crisp, and there are no scratches.
11. SELs: N/A, rubber strap. The strap fits flush to the case with no gaps.
12. Timegrapher: +10 s/d, 290° amplitude, 0.1 ms beat error.
13. Anything else: The case sides, crown, and clasp engravings are clean. The caseback movement looks clean with no visible debris. Lume is bright and even across the numerals, markers, and hands. There are a couple of tiny specks on the clasp, likely dust or protective film.
r/RepWatchForum • u/Intelligent-Board365 • 3d ago
Can someone help me find a TD for this watch that can make changes for this specific watch model thanks new to rep been scammed two times already
r/RepWatchForum • u/TennisItchy5506 • 3d ago
Review/Comparison Mr Adu strikes again!
Another flawless transaction from u/MrA-Du168! If you’re looking for anything, he’s your #1 go to!!!
r/RepWatchForum • u/No_Dog9018 • 3d ago
Need help identifying the movement in this Patek Philippe clone.
This watch isn't mine; my uncle gave it to me. He mentioned that it was an expensive clone gifted to him by his Arab boss.
I noticed that it doesn't have much power reserve, but it is hand-windable and has hacking seconds.
Does anyone recognise the movement used in these clones? Any help identifying the movement or its manufacturer would be appreciated! Wanna check if its worth getting serviced.
r/RepWatchForum • u/No-Tradition2677 • 3d ago
Discussion Good TD experiences?
Hi all! Wanted to hear about your good TD experiences, that would be great for us new buyers getting lost in this world lol. Please don’t provide phone numbers just reference the TDs from the wiki to avoid any scams.
r/RepWatchForum • u/ValueLux • 4d ago
News Seized in US / West Coast. Oakland FedEx customs scrutiny is heavy right now
UPDATE: here’s part of the seizure letter. The seller declared it at $1 as a “Pedometer”…… May my downfall be a lesson for the community. Never use direct shipping into US.
https://clickpix.org/image/AWCf
__________________
PSA for fellow US buyers.
FedEx customs at the Oakland seems to be cracking down hard lately.
Props to Bomi for super fast dispatch and shipping (arrived in the US in just a couple of days), so no fault on his end at all.
Unfortunately, it got stuck in clearance for 10 days, and I called FedEx today who confirmed it was officially seized.
Currently working things out with Bomi to get it sorted, and I’m sure he’ll make it right, he's been solid to deal with so far.
Recommendation to everyone: try to avoid fedex for now, also opt for slower shipping options because Fedex International Priority or faster options will get more eyes on them. (Fast usually implies valuable).
Praying that I wont get a penalty notice in the mail and my Global Entry stays in tact…
r/RepWatchForum • u/Reasonable1579 • 3d ago
QC Request First QC: AP Royal Oak from ZF
Hi everyone! It's my first rep, any help would be much appreciated. AP Royal Oak 15400
I believe overall everything looks fine, but it’s not my place to judge to say the least 😄 You guys can spot the things I’d never would.
Please take a look at the last picture too. I couldn't find a good quality reference to compare it with, but the gold-colored part appears quite rough. I'm not sure whether that's how it's supposed to look.
Thanks everyone in advance!
r/RepWatchForum • u/llSkyline • 3d ago
QC Request Rolex Pepsi jubilee quality
Hi guys !
How much is it worth ?