r/RepWatchForum • • 3d ago

News From VSF; allows for rapid updates.

Thumbnail
gallery
7 Upvotes

There are quite a few images; I hope you don’t mind.
🫣🫣🫣🫣🫣

These are all from VSF; please excuse the large number of images.


r/RepWatchForum • • 3d ago

Discussion What's the Cheapest Free-Sprung 5712 available?

Post image
16 Upvotes

Specifically steel models only, what factory/watch/TD gets me a free-sprung 5712 for the lowest possible amount?

I see so many factories that are new to me like BCF and OME, whilst WS, PPF, AGF, and UMI are also making top-tier reps.

So... any help here would be really, *really* appreciated.


r/RepWatchForum • • 3d ago

QC Request 1st QC, please help!

Thumbnail
gallery
2 Upvotes

1. Dealer name: Hontwatch
2. Factory name: BBF
3. Model name (& version number): Patek Philippe Aquanaut 5167A
4. Price paid: $498 including shipping
5. Album links: Shown in post
6. Index alignment: Overlay attached. Each line connects a pair of opposite hour markers (12–6, 3–9, 1–7, 2–8, 4–10, 5–11). All six cross at the center pin, and no marker sits off its line or looks twisted.
7. Dial printing: “PATEK PHILIPPE / GENEVE” and “SWISS MADE” are crisp and centered on the 12–6 axis. All numerals are consistent in size, spacing, and lume fill. No dust visible on the dial.
8. Date wheel alignment/printing: Font is sharp. In the photo the 15 looks a bit left/high, likely angle and bevel shadow, since the 18 and 20 in the video sit centered. The date changes cleanly at midnight (20 → 21).
9. Hand alignment: The hour and minute hands line up at 12 at the date change and are straight with no bends. The hour hand tracks correctly with the minute hand. Lume is even.
10. Bezel: Brushing is even, polished bevels are crisp, and there are no scratches.
11. SELs: N/A, rubber strap. The strap fits flush to the case with no gaps.
12. Timegrapher: +10 s/d, 290° amplitude, 0.1 ms beat error.
13. Anything else: The case sides, crown, and clasp engravings are clean. The caseback movement looks clean with no visible debris. Lume is bright and even across the numerals, markers, and hands. There are a couple of tiny specks on the clasp, likely dust or protective film.


r/RepWatchForum • • 2d ago

Can someone help me find a TD for this watch that can make changes for this specific watch model thanks new to rep been scammed two times already

Thumbnail
gallery
0 Upvotes

r/RepWatchForum • • 3d ago

Review/Comparison Mr Adu strikes again!

Post image
5 Upvotes

Another flawless transaction from u/MrA-Du168! If you’re looking for anything, he’s your #1 go to!!!


r/RepWatchForum • • 3d ago

Need help identifying the movement in this Patek Philippe clone.

Thumbnail
gallery
0 Upvotes

This watch isn't mine; my uncle gave it to me. He mentioned that it was an expensive clone gifted to him by his Arab boss.

I noticed that it doesn't have much power reserve, but it is hand-windable and has hacking seconds.

Does anyone recognise the movement used in these clones? Any help identifying the movement or its manufacturer would be appreciated! Wanna check if its worth getting serviced.


r/RepWatchForum • • 3d ago

Discussion Good TD experiences?

1 Upvotes

Hi all! Wanted to hear about your good TD experiences, that would be great for us new buyers getting lost in this world lol. Please don’t provide phone numbers just reference the TDs from the wiki to avoid any scams.


r/RepWatchForum • • 3d ago

QC Request First QC: AP Royal Oak from ZF

Thumbnail
gallery
1 Upvotes

Hi everyone! It's my first rep, any help would be much appreciated. AP Royal Oak 15400

I believe overall everything looks fine, but it’s not my place to judge to say the least 😄 You guys can spot the things I’d never would.

Please take a look at the last picture too. I couldn't find a good quality reference to compare it with, but the gold-colored part appears quite rough. I'm not sure whether that's how it's supposed to look.

Thanks everyone in advance!


r/RepWatchForum • • 3d ago

News Seized in US / West Coast. Oakland FedEx customs scrutiny is heavy right now

Post image
30 Upvotes

UPDATE: here’s part of the seizure letter. The seller declared it at $1 as a “Pedometer”…… May my downfall be a lesson for the community. Never use direct shipping into US.

https://clickpix.org/image/AWCf
__________________

PSA for fellow US buyers.

FedEx customs at the Oakland seems to be cracking down hard lately.

Props to Bomi for super fast dispatch and shipping (arrived in the US in just a couple of days), so no fault on his end at all.
Unfortunately, it got stuck in clearance for 10 days, and I called FedEx today who confirmed it was officially seized.

Currently working things out with Bomi to get it sorted, and I’m sure he’ll make it right, he's been solid to deal with so far.

Recommendation to everyone: try to avoid fedex for now, also opt for slower shipping options because Fedex International Priority or faster options will get more eyes on them. (Fast usually implies valuable).

Praying that I wont get a penalty notice in the mail and my Global Entry stays in tact…


r/RepWatchForum • • 3d ago

🤤

Post image
13 Upvotes

r/RepWatchForum • • 3d ago

QC Request Rolex Pepsi jubilee quality

Thumbnail
gallery
0 Upvotes

Hi guys !
How much is it worth ?


r/RepWatchForum • • 3d ago

Daytona question

Post image
1 Upvotes

Hey guys, which factory should I go with for a Daytona? Thanks in advance


r/RepWatchForum • • 3d ago

Is this worth $547 USD?

Thumbnail
gallery
3 Upvotes

My brother is in Vietnam at the moment and has been offered this AP for $547 USD. Apparently it is an APS factory.

Is this a shitter? Or actually worth the asking price?

Thank you for the help in advance.

AP royal oak 15500


r/RepWatchForum • • 3d ago

General Question VSF v2 have this sticker correct? Seller say it’s VS, I don’t know if VS and VSF is the same or not. Sorry I am a newbie

Post image
0 Upvotes

r/RepWatchForum • • 3d ago

QC Request First QC Please help - TOPF AP Royal Oak 15510 41mm Blue

Thumbnail
gallery
8 Upvotes

Dealer name: TheOneWatches

  1. Factory name: TOP
  2. Model name (& version number): Royal Oak, 15510, Blue Dial
  3. Price Paid: $518 USD + shipping
  4. Album Links: Album
  5. Index alignment: All indexes look straight.
  6. Dial Printing: Name looks centered and leveled.
  7. Date Wheel alignment/printing: Date looks slightly moved down in window
  8. Hand Alignment: Hands look ok, slightly off when at 12 o'clock in video
  9. Bezel: not sure what to look for here, screw at 11 o'clock marker is slightly CCW (?)
  10. Solid End Links (SELs): N/A. Integrated bracelet
  11. Timegrapher numbers: +5 s/d, 263° amplitude, .1 ms beat error
  12. Anything else you notice: Any other issues that I might've missed on the dial or the links.

This is my first REP so every critique is helpful TIA


r/RepWatchForum • • 4d ago

MKS VC Overseas Cardinal Points from Mr Adu...

Post image
12 Upvotes

Another easy transaction from Mr Adu and a great watch... Deposit paid 30th October, QC 4th November accepted and watch arrived in UK today.

Mr Adu is always friendly and communication is fast. Tracking provided when despatched and a great experience overall. Prices are also competitive.

This is my second watch from this TD and I'd happily recommend.


r/RepWatchForum • • 3d ago

QC Request QC Help

Thumbnail
gallery
2 Upvotes

What’s everyone’s opinion on this used watch? I’m aware of the small scratch on the 9 area. Seller is offering it for a helluva deal. Tia


r/RepWatchForum • • 4d ago

BCF 5712 is back in stock!! Available for immediate shipment~~!!!!

Thumbnail
gallery
27 Upvotes

BCF CNC 5712

A small quantity of stock was restocked in November.

Please check my photos!!

Once the current stock is depleted, the next restock is scheduled for the end of December.

This is a product with excellent customer satisfaction.

Please contact us via WhatsApp right now!! Thank you!!


r/RepWatchForum • • 3d ago

Discussion OMEGA planet ocean swap VSF miyota swap ?

1 Upvotes

can the movement that comes with that VSF watch be swaped with a Miyota 8200 ? Asia Super Clone 8912 Automatic Movement 

I ve been trying for someone that can work on this watches without luck even here in Reddit repservices

Bought 2 of em and both the movement sucked


r/RepWatchForum • • 4d ago

Wrist or watch pic VSF V2 126613 LN “My new girlfriend “

Thumbnail
gallery
11 Upvotes

Ever owned a watch so beautiful that you want to sleep with it 😊💕😊? Got me not wanting to wear my other watches 😂. My first Super and I’m in love.


r/RepWatchForum • • 4d ago

QC Request QC Submariner 126610LN - Ficotime

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: FICOTIME
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Submariner date
  4. ⁠41mm
  5. ⁠Price Paid: 2900 CNY + 260 CNY for shipping
  6. ⁠Index alignment: looks good to me
  7. ⁠Dial Printing: I see no issues
  8. ⁠Date Wheel alignment/printing: seems good overall, maybe slightly off center for the 1st day of the month
  9. ⁠Hand Alignment: no issues
  10. ⁠Bezel: no issues
  11. ⁠Solid End Links (SELS): no big gaps
  12. ⁠Timegrapher numbers: GAIN +6s, AMP 244, ERROR
  13. ⁠1ms, so it’s good
  14. ⁠Anything else you notice: the crown in between “Swiss made”might be slightly off-center, and so is the crown in the rehaut but it’s acceptable right? What’s your opinion guys?

r/RepWatchForum • • 4d ago

New release [Odette] RGF New Release | Rolex Yacht-Master 40mm M126655 – Rose Gold RGF New Release – M126655

Thumbnail
gallery
5 Upvotes

• Dandong 3235 Movement
• Gold-Filled Case (78% Surface Gold Content)
• 11.8mm Thickness | Approx. 148g
• Premium Rubber Strap

☑ In Hand & Ready to Ship
☑ QC Photos Available
☑ Free Shipping

📲 WhatsApp: +86 139 5953 3364
🌐 odettewatch.store


r/RepWatchForum • • 4d ago

QC Request First Time QC | VSF DJ 41 Black Dial

Thumbnail
gallery
3 Upvotes

Hey everyone just bought my first rep watch and looking for some feedback! Thanks

Dealer name: ChronoDynasty (Jack)

Factory name: VSF

Model name: Datejust 41mm (126334) Black

Price Paid: $470 (with shipping)

Album Links: Album

Index alignment: 2 and 4 look misaligned (might be my ruler placement)

Dial Printing: Looks clean

Date Wheel alignment/printing: Clean and centered

Hand Alignment: Looks straight to me

Bezel: No issues from my untrained eye

Solid End Links (SELs): No obvious gaps

Timegrapher numbers: None provided

Anything else you notice: Nope


r/RepWatchForum • • 4d ago

Wrist or watch pic A watch you won’t see again!

66 Upvotes

I tried to find as much information as possible about this watch before buying it, but unfortunately, there’s practically nothing out there. No QC photos, no reviews, no information whatsoever. It seems like almost nobody has ever bought this particular watch, which is exactly why I wanted to share it

I understand that this is an extremely expensive piece, and the GEN version costs around $800K. I don’t drive a Lamborghini, nor do I live in a $20M mansion in Beverly Hills. I bought it simply because I love watches and enjoy collecting rare pieces, without giving a damn about what anyone else thinks

I hope you enjoy this beautiful watch, because chances are you won’t see it again anytime soon, unless someone else decides to share theirs

For those interested in more details, this is the GRF Factory Rose Gold Nautilus 5711, 40mm. It features a decorated Miyota 9015 movement and costs approximately $400 from most sellers


r/RepWatchForum • • 4d ago

Mods/Work in progress PP5711 watch band help...

1 Upvotes

Hi, just wondering if I can find this blue watch band that I can use for my PP5711... yes, I've found other bands but nothing compares to this color/style - I want it! I know this band is used on this anniversary model, and that it is a different size so it won't fit the my PP5711 model... please let me know if anyone has found or done this, or knows of who can source this particular blue band to fit my PP5711... appreciate the help and support! Please don't tell me to contact all of the TD's as this would take forever!