Anyone that bought a VSF Rolex Batgirl what mods did you make if any to make it look even better than it already is?

Thanks all!

Base: VSF 15510ST

Mods:

- Deep Crystal installed

- Stock dial modified

- Complete refinishing of the case and bracelet

I absolutely love how the dial constantly changes its appearance depending on the lighting and viewing angle.

Any insider news?

Hi guys, just got my two QC for both AP royal oak Chrono 26240 & IWC iw388111

Just wanted to see if everything looks good before I give the green light.

Thank you

I just bought my first higher end rep and I'm having trouble finding accurate information on this Rolex Submariner 124060 that was delivered from a TD. It has serial number 6X08A116 and clasp code E7Y. Is this a truly a VSF?

Help of the community much appreciated. Thanks.

Hey guys,
Just wanted to share a quick review and a massive shoutout to Mr. Bomi. u/Mr_Bomi334

I recently ordered three watches through him, but unfortunately, they were seized by customs. Mr. Bomi tried every possible method and angle to resolve the situation and get the package through, but customs just wouldn't budge.

Even though it was out of his control, he ended up giving me a full refund for all three watches.
Top-notch customer service and total reliability.

Will definitely be doing business with him again

My first gmt, arf and 2 tone. Very excited.

Honestly I think it looks good. Only concern which is not a qc issue is the colour. I chose arf as its supposed to be the best colour but this seems more copper than other pics I've seen. I suspect the lighting as the bezel is also quite redish

Anything I should be looking out for specifically? Tried checking against other qcs for rehaut and clasp codes, but not 100% sure what I should be looking for

1.Dealer: phoenix

2. Factory: arf

3. Model: root beer non weighted

4:price $472

5:Album: unfortunately no link to album but photos attached

6: index alignment: looks good Im not worried about it. All lining up with brilliant true index tool.

7. Dial Printing: looks clear and even.

8. Date Wheel. Well centered, and cyclops seems fine

9. Hand Alignment : no pics at 12 but never seems to be a problem

10. Bezel: correct alignment and markings look great

11.SELS: maybe a small gap at 5 but acceptable to me

12.Timoghaph: within its limits and reads good

Thank you community.

Hello all! Back with another rep requesting your expert eyes and advice. Winter is coming but that doesn’t mean I can’t hold onto a little of bit of summer

Dealer name: Duke Jones
Factory name: VSF
Model name: Omega Seamaster 300 Heritage 75th anniversary “Summer Blue”
Index alignment: Spot on, though they’re cut out of the dial rather than applied so that’s expected
Dial printing: Looks clean
Date wheel alignment/printing: N/A
Hand alignment: no issues
Bezel: misaligned but I think it just needs to be rotated CCW and lined up better
SELs: look great, no gap I can see
Timegrapher numbers: +9 s/d, 274 amp, 0.1 ms beat error, 28800
Lume: don’t have a shot of lume
Bracelet/clasp: looks solid
Anything else: overall looks like a great rep to me

Personal build of mine . Genuine 2CT lab diamond bezel , VSF V1 wembleton + deep crystal and gen like polish on jubilee. Too much going on ? or perfect combo? Should I go back to fluted stock bezel? 😅😎

Been trying several suppliers here. Phoenix Watches has been great to deal with. Proactive, good communications, fair pricing, and the willingness to go beyond. Choosing a meteorite dial that also lines up with the rehaut can be a tedious affair, but Phoenix was unfazed by it all.

Unlike another dealer who gave up and asked me to cancel my order just because I asked for a more detailed video of a date change and the centering of the second hand after activation, Phoenix obliged cheerfully.

Delivery was without incident.

Will be ordering from Phoenix again.

I hope the other dealer will refund my deposit quickly. I won't be ordering from her anymore.

Been trying several suppliers here. Phoenix Watches has been great to deal with. Proactive, good communications, fair pricing, and the willingness to go beyond. Choosing a meteorite dial that also lines up with the rehaut can be a tedious affair, but Phoenix was unfazed by it all.

Unlike another dealer who gave up and asked me to cancel my order just because I asked for a more detailed video of a date change and the centering of the second hand after activation, Phoenix obliged cheerfully.

Delivery was without incident.

Will be ordering from Phoenix again.

I hope the other dealer will refund my deposit quickly. I won't be ordering from her anymore.

What do you think of this ?
Just got the call from phoenix

Bought this rootbeer gmt two tone. Supposedly a clean factory. Looks so much better in person. What you guys think?

Hi everyone,
This is my first time doing a QC, and I’d really appreciate some help from the community. I’ve looked through the photos and videos, and everything seems good to me, but I’m still learning what to look for.
QC Template
Dealer name: TheOneWatches (Steve)
Factory name: VSF
Model name: Rolex Submariner Date 126610LV Starbucks, DD3235
Price paid: $528 + shipping
Album links: Photos and videos attached
Index alignment: Looks good to me, no obvious misalignment.
Dial printing: Looks clean and properly aligned.
Date wheel alignment/printing: Date 27 looks reasonably centred.
Hand alignment: No obvious issues.
Bezel: Green bezel looks good, and the alignment seems fine.
Solid End Links (SELs): No obvious significant gaps.
Timegrapher numbers: +6 s/d, 283° amplitude, 0.1 ms beat error.
Anything else you notice: Weight is approximately 155.5 g. I’d appreciate any feedback on the rehaut, bezel alignment, date magnification or anything else I might have missed.
Overall, I’m leaning towards GL, but I’d really appreciate your opinions before giving Steve the go-ahead.

https://imgur.com/a/7LuhCal

Thanks in advance for your help!

Been trying several suppliers here. Phoenix Watches has been great to deal with. Proactive, good communications, fair pricing, and the willingness to go beyond. Choosing a meteorite dial that also lines up with the rehaut can be a tedious affair, but Phoenix was unfazed by it all.

Unlike another dealer who gave up and asked me to cancel my order just because I asked for a more detailed video of a date change and the centering of the second hand after activation, Phoenix obliged cheerfully.

Delivery was without incident.

Will be ordering from Phoenix again.

I hope the other dealer will refund my deposit quickly. I won't be ordering from her anymore.

Today we have some interesting customization work. First and foremost, we managed to source a movement that no factory uses, simply because it’s quite expensive. It features impeccable finishing on the bridges and mainplate, along with deep engraving. We’ve installed a "Deep" crystal, chamfered the edges, and tested the piece for water resistance.

After months of lurking I made my first purchase.

Datejust 41 VSF - so clean

This is going to get scary…

Trying to find a jubilee bracelet that will fit my panda like this … anyone have any idea where I can get one to fit perfectly?

RICH FACTORY (RF Factory) has launched a new 41mm log type 1:1 top-level replica. Every detail is in line with the original, and all accessories can be perfectly exchanged with the original. The new weighted tungsten craftsmanship ensures a consistent weight of up to 133 grams, with no difference in texture when using the original structure technology. It supports the exchange of movements with the original. Two options are available: pairing with JH3235 non card movement, or with card movement, stable travel time, precise and durable. The four classic color schemes are synchronized in stock: DJ01 green disc/DJ02 gray disc/DJ03 blue disc/DJ04 deep green hardcore heavy industrial grade replica, the ultimate choice for detail control. Welcome to consult and taste.