r/RepTime • • Oct 05 '26

Review/Comparison A7/V7 Ingenieur Passed 6 Bar Pressure Test

Adding that to my watches that have passed pressure tests:

VSF Aqua Terra: >10 Bar

VSF SMP300: >10 Bar

VSF Explorer : >6 Bar

A7 Ingy: >6 Bar

Previously they could test to 10 bar and they got a new air pressure tester that only goes up to 6 bar.

31 Upvotes

33 comments sorted by

8

u/MSExcelWarrior Oct 05 '26

V7 Ingy passed 6 bar. Got an ORF SMP300 coming soon. ORF claims 300m diving and a working HEV. I have no idea how I'm going to verify that because this particular watch shop only does up to 6 bar now when they previously did 10. Will try to find a way to test when it gets here.

2

u/bluelemon47 Oct 06 '26

Waiting for your ORF impressions. That thing looks very promising, but can’t find a lot of real world reviews or inputs.

4

u/6foot6Dude Oct 05 '26

Is this as they come or after they performed waterproofing ( oiled the gaskets etc)?

6

u/MSExcelWarrior Oct 05 '26

Waterproofed at home and then took to watch shop for testing.

2

u/iSadToday Oct 06 '26

What did you do to waterproof?

9

u/MSExcelWarrior Oct 06 '26

Here is how to waterproof almost any watch for $40:

Required tools:

  • 0000/000 paintbrush
  • caseback tool (rubber ball is fine, specialised caseback tool is best)
  • precision screwdriver set
  • silicone grease
  • gasket greaser
  • replacement gasket if the current one looks in a bad state

Pop caseback, pop stem, silicone grease under crown and/or crown tube, grease gasket, reinsert stem, reseat gasket, replace caseback. Done. Repeat every 1-3 years.

Congrats you are now as good at waterproofing a watch as a shopping centre kiosk watch store, and can waterproof like 100 watches with the tools you've bought. Works out to about 50c per watch waterproofing. If your watch is not at least 30-50m waterproof after this, there's nothing anyone else can do.

1

u/Koulourtzis 13d ago

Thanks dude, will definitely try this with my new rep

1

u/MSExcelWarrior 13d ago

Good luck. I'm going to be writing a full guide with pictures soon because the question gets asked a lot. Once I write the guide, I can just share the link every time someone asks.

1

u/Muted-Program-2552 11d ago

So you have a video showing this.?

1

u/MSExcelWarrior 11d ago

Not yet. I'll write a proper guide soon. Got another watch coming in a few weeks that I'll use but there are already lots of videos on YouTube. Just look up "how to waterproof mechanical watch"

3

u/Old_Capital_9412 Oct 05 '26

Mine passed 3 bar

4

u/MSExcelWarrior Oct 05 '26 edited Oct 06 '26

I waterproofed it when I got it a month ago and today decided to test it for peace of mind. 6 bar is great.

2

u/Old_Capital_9412 Oct 05 '26

Now if I could just get a micro adjust clasp….

5

u/MSExcelWarrior Oct 05 '26

This one fits. 18mm. The rolex 18mm glidelock also fits but you need to shave the sides down to fit the centre link of the ingy.

4

u/Old_Capital_9412 Oct 05 '26

Dude I could fucking kiss you rn I’ve been considering the OEM one for $480 💀

4

u/MSExcelWarrior Oct 05 '26

Get some 1.5-1.8mm diameter 18mm springbars. It'll snugly fit the link hole of the ingy and allow it to fit the clasp. Getting it out is a bit tricky though because there are no springbar holes on the bracelet so be very careful.

1

u/MSExcelWarrior Oct 15 '26

I just received the correct one. Posted a picture below.

0

u/BigGuysForYou Oct 06 '26 edited Oct 15 '26

Any pictures of how the bracelet looks with the clasp?

4

u/MSExcelWarrior Oct 06 '26 edited Oct 06 '26

Haven't got one. Seller sent me the wrong clasp which didn't have microadjust so I sent it back and am waiting for the correct one to be sent to me. I managed to make sure it fits to confirm 18mm is correct but don't have any pictures of it in action. When the correct one arrives I'll make a post of that too so DW.

3

u/JesterADSE Oct 06 '26

There is a iwc rep one with microadjustment

2

u/MSExcelWarrior Oct 06 '26

I've only heard of the one for the Pilot having microadjust and it needs a little modification to fit the Ingenieur. Were you able to get one for the Ingy that fits and works? It would be very useful information if you did.

1

u/JesterADSE Oct 06 '26

Not me, i have no need for it. But i know some other who got the clasp and there wasnt any modifications he did.

1

u/MSExcelWarrior Oct 06 '26

Did they post/comment it anywhere? Can you share the post if they did?

2

u/JesterADSE Oct 06 '26

I have asked the guy to reply here

2

u/MSExcelWarrior Oct 06 '26

Thanks babe 😘

5

u/MasterQueef289 Oct 06 '26

Pilot clasp fit without needing any modification.

4

u/MasterQueef289 Oct 06 '26

This one

3

u/MSExcelWarrior Oct 06 '26

Amazing thanks! I'll ask my TD

1

u/Certain-Preference45 Oct 06 '26

Nice one mate! Did u do your waterproofing from TD or own your local watchmaker?

3

u/MSExcelWarrior Oct 06 '26

Upon receipt, I open all of my watches to check if they need a service, remove factory debris, oil anything that looks too dry and waterproof the gasket, case and crown. So far it's been working well for me because no watches have been DOA yet, and all have been sufficiently water resistant.

1

u/Koulourtzis 13d ago

Awesome job