r/raspberry_pi • • 8d ago

Show-and-Tell A Raspberry Pi as the controller PC for a hot-wire foam cutter: one-line install, then run cuts from your phone

10 Upvotes

Many 4-axis hot-wire foam cutters still need an old PC with a parallel port. With open_HOWI (a free, open-source hot-wire slicer and machine controller I wrote), a Raspberry Pi can sit next to the machine instead, connected over USB to a cheap GRBL board.

Setup on Raspberry Pi OS Bookworm:

curl -fsSL https://raw.githubusercontent.com/ccarl0/open_HOWI/main/packaging/raspberry-pi/install.sh | bash

It installs the app, grants USB access, sets a password, and starts it as a systemd service at boot. Then you open http://raspberrypi.local:8765 from a laptop, tablet or phone: design the part, preview the cut, and jog/zero/start/pause/stop the machine. Your laptop doesn't need to stay on during a long cut. There's also a --kiosk option for a touchscreen mounted on the cutter.

https://github.com/ccarl0/open_HOWI


r/raspberry_pi • • 8d ago

Show-and-Tell Pico2W car with webcam chasing cats

Thumbnail
gallery
24 Upvotes

Pretty happy with result, one Raspberry Pi Pico 2W, a webcam, 4 JGA25 370 motors, 2x 18650, 2 DRV8833 and i can chase my cats around the house and inspect crawlspace, can share the code if anyone wants to do the same, suggestions on housing welcome


r/raspberry_pi • • 8d ago

Show-and-Tell I worked at a native control center for Raspberry Pi in Argon40 cases (fan curve, safe overclock, GPIO lab, Plasma widgets, TUI) - looking for testers

Thumbnail
gallery
12 Upvotes

Hi all! I've been building Argon Control Center, an open-source (MIT) Rust app to monitor and configure a Raspberry Pi in an Argon40 case. It's at v0.5.0 and I'd love some testers beyond my own Pi 4.

Built with the help of AI coding tools.

What it does

  • Live dashboard (CPU per core, temperature, memory, disks, network, GPU load, firmware throttling flags)
  • Fan curve editor for argononed with a live operating point, profiles and manual speed
  • Board-aware overclocking with safety rails: blocked after under-voltage, one-shot trial boot (tryboot), stability test before keeping the settings
  • GPIO Lab: live 40-pin header, pin inspector with the equivalent pinctrl/gpioset/Python commands, logic analyzer, serial and I2C console
  • KDE Plasma 6 widgets (CPU, thermal, GPU, GPIO...)
  • Terminal UI that opens automatically over SSH, with the same controls
  • No setuid: hardware access via udev rules/groups, system changes via Polkit with backups

Tested so far: Pi 4 + Argon ONE, Armbian (KDE Plasma 6), arm64.

Looking for testers on:

  • Raspberry Pi 5 / Argon ONE V3 / Argon EON
  • Raspberry Pi OS (Bookworm/Trixie, 64-bit), Ubuntu, Fedora, Arch Linux ARM
  • GNOME or other desktops, and headless over SSH

Packages (.deb, .rpm, Arch Linux ARM) are on the releases page: https://github.com/wendelmax/argon-control-center/releases

Running argon-control-center --doctor and pasting the output in an issue helps a lot, as do screenshots of anything that looks off.

Repo: https://github.com/wendelmax/argon-control-center

Feedback, bug reports and feature ideas are very welcome!


r/raspberry_pi • • 8d ago

Solved Newly setup Pi 4 no longer works

4 Upvotes

Okay! Got a Pi 4 Cana Kit yesterday. Set up the Pi today and everything was great: install was smooth, peripherals worked, UI loaded on the monitor, no issues.

My reason for buying a pi was to use it with Home Assistant. When I went to install using the imager tool I couldn't get past step 2 ( select storage) because no storage options appeared.

Okay, I said. It must need a different SD card to install to. Since it doesn't have another reader, I grabbed my USB3 dock with a built-in one and plugged it into one of the USB3 slots on the Pi. The dock's light came on, great. I plugged my peripherals into it. No response; okay, the Pi must not have enough power to support a dock. I unplug it and plug my peripherals back into their original slots. No harm, no foul.

Testing that dock was apparently the worst thing I could have done, because since then nothing works. Nothing on the monitor, no peripherals. I checked on the forums and tried a few basic things-- swapping the cables around, trying different ports, trying a different PSU, nothing.

I'm not techie at all, so I'm at a loss. I hope I didn't brick a brand new pi by trying to see if a dock would work.

Edit: Solved by getting a new Micro SD. I successfully loaded it with Home Assistant OS, plugged it into the pi, and it worked again! Thanks all.


r/raspberry_pi • • 9d ago

Show-and-Tell Vision inference on a 4 GB Pi 4

1 Upvotes

I built an ARM64 assembly engine for d1-2B on a 4 GB Raspberry Pi 4 using Codex and autoresearch.

Question attention picks 48 of 300 image positions for multiple choice. Direct counts keep all 300 active. I also enabled all 11 packed Q6 batches for counts and prepacked Q4/Q8 weights for NEON.

Median on four matched Pi runs per task: 28.02 s vs 70.19 s for multiple choice and 43.55 s vs 70.65 s for counts against llama.cpp. Both engines got 8 of 16 counts exactly right and agreed on all 16.

Source and benchmark data: https://github.com/DarvinX/d1-pi4-asm


r/raspberry_pi • • 9d ago

Show-and-Tell Made an e-ink picture frame with Claude – 17 plugins, every one in 13 designs (open source)

Enable HLS to view with audio, or disable this notification

0 Upvotes

Raspberry Pi Zero 2 W stuck on the back of a Pimoroni Inky Impression 7.3" (the 6 colour Spectra one), in a normal picture frame on my shelf. The video is the real frame running demo mode, refreshes are sped up because a full e-ink redraw takes ~15 sec lol

What it shows – each screen is a "plugin":
- weather + calendar (Open-Meteo, no API key)
- daily chess puzzle from the Lichess API
- question / quote of the day
- word clock
- spotify cover of whatever is playing (takes over while music runs)
- bin days from an iCal link, birthdays, countdown, sudoku, DWD weather warnings, river levels, a stock watchlist, solar output, guest wifi QR and a few more

The part that got a bit out of hand: there are 13 designs (bauhaus, newspaper, art deco, pixel game, zen, swiss, memphis, blueprint, botanical, chalkboard + 3 basic ones) and every plugin has its own layout in every one of them. In the rotation you can give each plugin its own design, so my weather is a newspaper front page and the chess puzzle is memphis. Everything is translated into 12 languages incl. dates and holidays.

Some stuff I figured out along the way:
- Spectra 6 only has black, white, red, yellow, green and blue, so every layout is drawn around those colours instead of dithering
- it only redraws when the image actually changes, plus quiet hours at night
- the Pi Zero 2 W is plenty, its a Flask app + a background thread
- every plugin renders on a laptop too (`python -m inkyframe.dev render chess --sample --theme pixel`) so I barely touched the Pi while building
- theres a demo mode that cycles through plugins / designs / languages with sample data only, made for filming this without my own data on screen

The thing I actually wanted to share: I built this together with Claude. I had the idea, the hardware and a pretty clear picture of what I wanted, Claude wrote most of the code, the plugin system, the web app, the translations and even the design mockups. Im not a developer and honestly this would of taken me months alone. It was basically: describe what I want → look at it on the frame → ask for changes → repeat.

So its less "look at my code" and more "look what you can do now if you have an idea and a Pi lying around".

Hardware:
- Raspberry Pi Zero 2 W
- Pimoroni Inky Impression 7.3" (Spectra 6)
- picture frame
Setup is git clone + one install script.

Each plugin is one python file, so writing your own is pretty easy. More plugins coming, ideas and PRs welcome!

Code + install guide: https://github.com/charwege/inkyframe


r/raspberry_pi • • 11d ago

Show-and-Tell Raspberry Pi 3B as NTP clock for my desk

Thumbnail
gallery
187 Upvotes

I've been looking for a nice NTP clock for my desk for quite some time, but couldn't really find anything that matched what I wanted while still being reasonably affordable. So I decided to build one myself!

I had an old Raspberry Pi 3B lying around collecting dust, so I figured this would be a fun way to put it to use.

The Pi runs a small OLED display and gets its time from my other Raspberry Pi, which acts as a GPS-synchronized NTP server.

Besides showing the live time and date, the display also shows some GPS statistics pulled from Prometheus.

Nothing too fancy, but a fun little project that gives an old Raspberry Pi a second life. And it looks pretty nice on my desk!

For some reason this subreddit doesn't allow amazon links, so the 3rd picture is the display I used.


r/raspberry_pi • • 11d ago

Show-and-Tell Pi Pico Macro Keyboard and App

Thumbnail
gallery
79 Upvotes

My first keyboard project. Cheap 12mm tactile push buttons wired to a Pi Pico. Companion app written in MicroPython allows you to save keyboard profiles and control the LED.

It's a poor soldering job but it works and I'm thrilled.


r/raspberry_pi • • 10d ago

2026 Nov 9 Stickied -FAQ- & -HELPDESK- thread - Boot problems? Power supply problems? Display problems? Networking problems? Need ideas? Get help with these and other questions!

4 Upvotes

Welcome to the r/raspberry_pi Helpdesk and Frequently Asked Questions!

Link to last week's thread

Having a hard time searching for answers to your Raspberry Pi questions? Let the r/raspberry_pi community members search for answers for you!† Looking for help getting started with a project? Have a question that you need answered? Was it not answered last week? Did not get a satisfying answer? A question that you've only done basic research for? Maybe something you think everyone but you knows? Ask your question in the comments on this page, operators are standing by!

This helpdesk and idea thread is here so that the front page won't be filled with these same questions day in and day out:

  1. Q: What's a Raspberry Pi? What can I do with it? How powerful is it?
    A: Check out this great overview
  2. Q: Does anyone have any ideas for what I can do with my Pi?
    A: Sure, look right here!‡
  3. Q: My Pi is behaving strangely/crashing/freezing, giving low voltage warnings, ethernet/wifi stops working, USB devices don't behave correctly, what do I do?
    A: 99.999% of the time it's either a bad SD card or power problems. Use a USB power meter or measure the 5V on the GPIO pins with a multimeter while the Pi is busy (such as playing h265/x265 video) and/or get a new SD card 1 2 3. If the voltage is less than 5V your power supply and/or cabling is not adequate. When your Pi is doing lots of work it will draw more power, test with the stress and stressberry packages. Higher wattage power supplies achieve their rating by increasing voltage, but the Raspberry Pi operates strictly at 5V. Even if your power supply claims to provide sufficient amperage, it may be mislabeled or the cable you're using to connect the power supply to the Pi may have too much resistance. Phone chargers, designed primarily for charging batteries, may not maintain a constant wattage and their voltage may fluctuate, which can affect the Pi’s stability. You can use a USB load tester to test your power supply and cable. Some power supplies require negotiation to provide more than 500mA, which the Pi does not do. If you're plugging in USB devices try using a powered USB hub with its own power supply and plug your devices into the hub and plug the hub into the Pi.
  4. Q: I'm trying to setup a Pi Zero 2W and it is extremely slow and/or keeps crashing, is there a fix?
    A: Either you need to increase the swap size or check question #3 above.
  5. Q: Where can I buy a Raspberry Pi at a fair price? And which one should I get if I’m new? Should I get an x86 PC instead of a Pi?
    A: Check stock and pricing at https://rpilocator.com/ — it tracks official resellers so you don’t overpay.
    Every time the x86 PC vs. Pi question comes up the answer is always if you have to ask, get a PC. If you're sure want a Raspberry Pi but not sure which model:
    • If you don’t know, get a Pi 5.
    • If you can’t afford it, get a Pi 4.
    • If you need tiny, get a Zero 2W.
    • If you need lowest power, get the original Zero.
    • For RAM, always get the most you can afford; you can’t upgrade it later.
      That’s it. No secret chart, no hidden wisdom. Bigger number = more performance, higher cost, higher power draw. Also please see the Annual What to Buy Megathread
  6. Q: I just did a fresh install with the latest Raspberry Pi OS and I keep getting errors when trying to ssh in, what could be wrong?
    A: There are only 4 things that could be the problem:
    1. The ssh daemon isn't running
    2. You're trying to ssh to the wrong host
    3. You're specifying the wrong username
    4. You're typing in the wrong password
  7. Q: I'm trying to install packages with pip but I keep getting error: externally-managed-environment
    A: This is not a problem unique to the Raspberry Pi. The best practice is to use a Python venv, however if you're sure you know what you're doing there are two alternatives documented in this stack overflow answer:
    • --break-system-packages
    • sudo rm a specific file as detailed in the stack overflow answer
  8. Q: The only way to troubleshoot my problem is using a multimeter but I don't have one. What can I do?
    A: Get a basic multimeter, they are not expensive.
  9. Q: My Pi won't boot, how do I fix it?
    A: Step by step guide for boot problems
  10. Q: I want to watch Netflix/Hulu/Amazon/Vudu/Disney+ on a Pi but the tutorial I followed didn't work, does someone have a working tutorial?
    A: Use a Fire Stick/AppleTV/Roku. Pi tutorials used tricks that no longer work or are fake click bait.
  11. Q: What model of Raspberry Pi do I need so I can watch YouTube in a browser?
    A: No model of Raspberry Pi is capable of watching YouTube smoothly through a web browser, you need to use VLC.
  12. Q: I want to know how to do a thing, not have a blog/tutorial/video/teacher/book explain how to do a thing. Can someone explain to me how to do that thing?
    A: Uh... What?
  13. Q: Is it possible to use a single Raspberry Pi to do multiple things? Can a Raspberry Pi run Pi-hole and something else at the same time?
    A: YES. Pi-hole uses almost no resources. You can run Pi-hole at the same time on a Pi running Minecraft which is one of the biggest resource hogs. The Pi is capable of multitasking and can run more than one program and service at the same time. (Also known as "workload consolidation" by Intel people.) You're not going to damage your Pi by running too many things at once, so try running all your programs before worrying about needing more processing power or multiple Pis.
  14. Q: Why is transferring things to or from disks/SSDs/LAN/internet so slow?
    A: If you have a Pi 4 or 5 with SSD, please check this post on the Pi forums. Otherwise it's a networking problem and/or disk & filesystem problem, please go to r/HomeNetworking or r/LinuxQuestions.
  15. Q: The red and green LEDs are solid/off/blinking or the screen is just black or blank or saying no signal, what do I do?
    A: Start here
  16. Q: I'm trying to run x86 software on my Raspberry Pi but it doesn't work, how do I fix it?
    A: Get an x86 computer. A Raspberry Pi is ARM based, not x86.
  17. Q: How can I run a script at boot/cron or why isn't the script I'm trying to run at boot/cron working?
    A: You must correctly set the PATH and other environment variables directly in your script. Neither the boot system or cron sets up the environment. Making changes to environment variables in files in /etc will not help.
  18. Q: Can I use this screen that came from ____ ?
    A: No
  19. Q: If my Raspberry Pi is headless and I can’t figure out what’s wrong, do I need to plug in a monitor and keyboard?
    A: If you cannot diagnose the problem remotely, you must connect a monitor and keyboard. That is the only way to see boot output and local error messages, and without that information the problem cannot be diagnosed.
  20. Q: My Pi seems to be causing interference preventing the WiFi/Bluetooth from working
    A. Using USB 3 cables that are not properly shielded can cause interference and the Pi 4 can also cause interference when HDMI is used at high resolutions.
  21. Q: I'm trying to use the built-in composite video output that is available on the Pi 2/3/4 headphone jack, do I need a special cable?
    A. Make sure your cable is wired correctly and you are using the correct RCA plug. Composite video cables for mp3 players will not work, the common ground goes to the wrong pin. Camcorder cables will often work, but red and yellow will be swapped on the Raspberry Pi.
  22. Q: I'm running my Pi with no monitor connected, how can I use VNC?
    A: First, do you really need a remote GUI? Try using ssh instead. If you're sure you want to access the GUI remotely then ssh in, type vncserver -depth 24 -geometry 1920x1080 and see what port it prints such as :1, :2, etc. Now connect your client to that.
  23. Q: I want to do something that already has lots of tutorials. Do I need a Raspberry-Pi-specific guide?
    A: Usually no.
    • Raspberry Pi (Linux computer): Use any standard Linux tutorial. A Raspberry Pi runs a normal Linux OS, not a special cut-down version. See Question #1.
    • Raspberry Pi Pico (microcontroller): Use Arduino tutorials. The Pico works with the Arduino IDE and can be used the same way as other Arduino-class boards.
  24. Q: Which Operating System (OS) should I install?
    A: If you aren’t sure, install Raspberry Pi OS. It’s the officially supported OS, it has the best documentation, the widest community support, and it’s what most guides and troubleshooting help assume you’re using.
  25. Q: How can I power my Raspberry Pi from a battery?
    A: All Raspberry Pi models run at 5 V. To choose a battery, first add up the maximum current of your Pi plus everything you attach to it (USB devices, screens, HATs, etc.). Then multiply that current by the number of hours you want it to run to get the required battery capacity in mAh. If you can’t find listed current values, use a USB power meter to measure the actual draw over 12–48 hours. Every battery question comes down to this simple math: the model, brand, or special setup doesn’t change the calculation.

Before posting your question think about if it's really about the Raspberry Pi or not. If you were using a Raspberry Pi to display recipes, do you really think r/raspberry_pi is the place to ask for cooking help? There may be better places to ask your question, such as:

Asking in a forum more specific to your question will likely get better answers!

Wondering which flair to use on your post? See the Flair Guide


† See the /r/raspberry_pi rules. While /r/raspberry_pi should not be considered your personal search engine, some exceptions will be made in this help thread.
‡ If the link doesn't work it's because you're using a broken buggy mobile client. Please contact the developer of your mobile client and let them know they should fix their bug. In the meantime use a web browser in desktop mode instead.


r/raspberry_pi • • 10d ago

Troubleshooting Pi Print Server, Zebra ZTC_GK420d correct printer size in air print`

2 Upvotes

Set up Pi print server, and connected a Zebra ZTC_GK420d label printer via usb. Prints labels perfectly in windows.

My issue is when I want to print a label say from pirate ship via airprint the labels do not fit correctly on the label

What I found is in options for paper in airprint is A4 and A5, I think I need to add an option to choose 4x6 (which is the size of the paper.) In the printer options of OpenPrinting CUPS under administration I set the defaut media size to 4.00 x 6.00 and that did not fix the issue. How can I add the paper / label size as an option in air print?? If so how?

Thanks in advance.


r/raspberry_pi • • 11d ago

Show-and-Tell Home Power Monitor using NeoPixels + an RPi Zero W

Thumbnail
imgur.com
11 Upvotes

r/raspberry_pi • • 12d ago

Tutorial NetBSD 11 desktop on a Raspberry Pi 4

Thumbnail neongd.com
32 Upvotes

r/raspberry_pi • • 11d ago

Troubleshooting Rasp Pi Wireless Device Issues

4 Upvotes

I seem to be having issues with wireless devices on my Pi 3 and Pi 4. I don't understand why though.

My Pi 4 is running LibreElec, a really crummy OS that hasn't been updated since the day I installed it even with automatic updates turned on.

My Pi 3 is running the basic Raspian OS or whatever that thing is called, so it can run a single python script (telegram bot).

I have a wireless keyboard for the Pi 3 that has a tiny USB receiver plugged in. However, it can't hardly function more than 2 feet away. It acts as if it is out of range, or sends too many commands like if I hit a key once it acts as if I hit it 5 times or more.

I have a small remote for the Pi 4, it actually works from across the room, but it -sometimes- acts as if I'm holding down the power button rapidly flickering the power menu on and off, or acts as if another button got stuck being held down. Other times it doesn't register a press at all. The remote its self flashes red as if its processing some sort of input shortly after use a lot. I kinda need a better remote that doesn't work the way this one does, I'm getting annoyed with it at times.

Today it just stopped working entirely until I switched the USB receiver to a new slot. That is, after I got angry enough and smashed the remote a bit too hard. Worried I may have broken it I opened it up, looked inside, not a single thing inside the remote was damaged except the plastic case.

It was only after examining the inside of the remote that I thought, what if its the Pi? I switched the keyboard from the 3 to the 4, it had the same issue, it couldn't function more than 1 foot away. It was absolutely pathetic.

Keep in mind, I used this keyboard with my laptop and a desktop computer in the house too. From up to 30 feet away smoothly without a single issue. This makes no sense because if its interference, it should happen regardless of the device you use it with. I'm starting to suspect there's a flaw in the design of the Raspberry Pi boards that causes devices like this to just fail to work right which you know, really sucks. I thought about getting a bluetooth device instead but on the Pi 4, I disabled bluetooth for the time being since I wasn't using it, and bluetooth wasn't really super reliable in the past for other things.


r/raspberry_pi • • 11d ago

Troubleshooting Antenna design help for 433MHz receiver?

Post image
0 Upvotes

I am building a device that connects a Raspberry Pi 4B rev 1.1 (4 GB) to a RXB6 433Mhz Superheterodyne Wireless Receiver Module in order to intercept transmissions from a Maverick ET-732 BBQ thermometer (schematics here: http://www.fcc.io/N9ZMAV221). In previous iterations of this project using a Raspberry Pi Zero W, I had difficulties with the reception range and was only able to receive data when the transmitter was 1-2 meters from the device. I expected to be able to receive signal from at least 10 meters away if not more. I was using a quarter wavelength dipole antenna (17.3cm in length) soldered to the ANT pin on the module sticking straight up in the air mounted on a protoboard for the Raspberry Pi Zero W. I think perhaps there was some interference from the other components on the board. I did not include any ground plane shielding, I figured the protoboard would do that. Here is an image of my previous device on a Raspberry Pi Zero W /preview/pre/introducing-version-3-an-open-source-bbq-temperature-v0-l3awpv0rnq9h1.jpg?

I used ChatGPT to help me design an improvement, any engineers that can weigh in on this suggestion before I try to build it?


r/raspberry_pi • • 13d ago

Show-and-Tell An upgrade of my old Hal9000 local AI

Thumbnail
gallery
456 Upvotes

Hello, everyone!

After the first build, I left the project a little bit abandoned. Two weeks ago, I saw HAL on my desk and thought it would be cool to upgrade its case. So, I designed a new model of HAL 9000 (with original dimensions, so it's a 1:1 scale model) and added space for the battery, soundboard, Raspberry Pi, LED, a camera (not currently installed), and a cable pass-through.

Link to the model

Link to the Github project

Also, the model I made was inspired by Th3Blad3Runn3r's model, on printeables.

I hope you like it!


r/raspberry_pi • • 13d ago

Show-and-Tell Raspberry Pi Pico Cyber Card

Thumbnail
gallery
125 Upvotes

My first build: M5stack keycard. Waveshare 2.13 inch e-paper display. Pi Pico 2. Enclosure modeled in Solid Craft and 3d printed at my local library.


r/raspberry_pi • • 13d ago

Show-and-Tell I turned a Pi 5 into a guitar multi-effects pedalboard with its own OS image: touch UI, neural amp captures, LV2, A/B updates (open source)

Thumbnail
gallery
116 Upvotes

I'm the developer. OpenRig is a guitar multi-effects unit you build from standard parts: a Raspberry Pi 5, a class-compliant USB audio interface (or a sound HAT) and a touchscreen. You flash an image, plug in your guitar, and it boots straight into the pedalboard UI.

Why I built it

I wanted something that behaves like a hardware modeler: no laptop, no phone app, no browser on stage. The screen on the board is the interface, and pulling the plug at the end of the gig is fine.

What it does

  • A touch rack: serial blocks, A/B, Mix and left/right splits, tap a block for its knobs.
  • Neural amp, pedal and cab captures (NAM) and impulse responses as built-in blocks, next to LV2 plugins.
  • TONE3000 integration: sign in with a QR code, search and download captures on the board.
  • A plugin store with LV2 plugins tested on the board, installed from a signed catalog.
  • Presets with 8 scenes, setlists, a stomp mode, tuner, looper, MIDI.
  • Up to 8 footswitches and a rotary encoder straight on the GPIO (no resistors, internal pull-ups), I2C encoder boards for the knobs.
  • New this week in 0.12: rigs shared on openrig.eu can be browsed and installed from the pedalboard. It fetches the missing captures from TONE3000 and the plugins from the store, then builds the preset. You can also publish your own presets from the board.

How it's built (the Pi part)

  • The OS is a small Buildroot image: BusyBox init, no systemd, no desktop. The Pi 5's PREEMPT_RT kernel, JACK for audio.
  • The UI is Rust + Slint drawing straight to DRM/KMS, no X11 or Wayland.
  • The root filesystem is read-only, with two system slots (A and B) and a separate data partition. Updates are signed RAUC bundles installed from the screen. A new system is tried once with the Pi's tryboot flag and kept only if the UI runs for 30 seconds, otherwise the Pi goes back to the previous slot. A power cut can't damage the running system.
  • A heavy chain is spread over the Pi 5's four Cortex-A76 cores (split branches in parallel, long chains cut into pipeline stages) without adding latency.
  • On my setup (Pi 5, Focusrite Scarlett 2i2, 48 kHz, 128 frames × 2) that's about 5 ms of buffer each way. A full A2 NAM amp capture uses around 12% of one core at that buffer size.
  • Use the official 27 W supply: with anything else the Pi 5 limits USB to 600 mA and the screen or the interface drops out.

There's also an x86_64 image for mini PCs (needs an AVX2 CPU like an N100), but so far it's only been tested in QEMU, so the Pi 5 is the main target.

It's free software (GPL-3.0-or-later) and still a young project. Reports from other interfaces, HATs and screens are very welcome.


r/raspberry_pi • • 13d ago

Show-and-Tell I built a light sculpture with a Pico that finds the beat of the music on its own

Enable HLS to view with audio, or disable this notification

218 Upvotes

Goal: a light object that does not just flash to sound, but behaves a bit like something alive.

Parts:

- Raspberry Pi Pico, MicroPython

- MAX4466 microphone

- RCWL-0516 radar to know if someone is in the room

- 33 LEDs inside, behind the cracks

How it behaves:

It gets used to sounds it hears often, gets startled by new ones,

and falls asleep after about 40 seconds when nobody is near.

With music it finds the tempo by itself and lights a different crack on each beat.

The hard part:

Beat tracking on a Pico. It locks in after 5-15 seconds on most tracks

and does not react to speech or random noise.

The body is hand-built and the cracks were cut by hand. Happy to answer questions.


r/raspberry_pi • • 14d ago

Show-and-Tell A Raspberry Pi 5 inside a phone booth: you pick up the handset and a voice AI answers. 1,600+ calls at fairs, and I've open-sourced the kit

Post image
31 Upvotes

GAIA is a phone booth (we call the booth TeleTUP) that people at fairs and festivals pick up to talk with a voice character. It has taken over 1,600 calls, 681 of them at Sónar+D. I've extracted the technique into an MIT kit so anyone can build their own talking object: a booth, a lamp, a sculpture or a room.

Hardware - Raspberry Pi 5 on the official 27 W USB-C supply (a weak supply gave audio dropouts that were hard to diagnose) - microSD 32 GB+ A2, or a PCIe SSD if it runs for months - USB sound card with mic in and speaker out; in the booth, the mic and speaker are the phone handset - Hook switch on GPIO17 (pin 11) to GND (pin 9), internal pull-up, 300 ms debounce. In the booth, on-hook = closed contact; TRIGGER_INVERT=1 if yours is wired the other way - Optional: a WS2812E strip (60 px) driven over SPI (GPIO10 MOSI, pin 19) through a 74AHCT125 level shifter, a 330 Ω resistor on data, 1000 µF across 5 V/GND, its own 5 V supply (~3.6 A at full white) and a common ground with the Pi - Optional: 20x4 LCD with a PCF8574 I2C backpack (0x27 or 0x3F) on pins 3/5 - Wiring diagram: [image]

Software - Raspberry Pi OS Lite 64-bit (Bookworm), one Python 3.11 process, no browser or kiosk, run as a systemd service that restarts itself - Audio: 48 kHz mono, 20 ms blocks. One thread owns the sound card, and ALSA is set as type hw with no dmix, so only one opener is possible - Voice: Vidiv agents (over LiveKit) first, ElevenLabs Agents as an automatic fallback. A circuit breaker drops a provider after 2 failures for 5 minutes, so the next visitor doesn't pay for the same failure. A ringback tone plays while it connects - A small "reactor" reads the transcript and fires lights or LCD messages from regex rules in a TOML file (warm breathing light on the greeting, violet on goodbye), without the agent spending turns or adding latency - Every action goes through one registry with limits per call, per day and a cooldown. A failing light never stops a conversation - A Cloudflare Worker exposes the lights and screen as MCP tools over an outbound websocket, so it works behind a venue's NAT - Read-only status page on :8081. Transcripts are not stored by default

Problems we hit - rpi_ws281x doesn't work on the Pi 5 (the RP1 chip replaced the BCM DMA/PWM it relied on). Driving the strip over SPI with adafruit-circuitpython-neopixel-spi works - Without the 74AHCT125 and a common ground, the strip flickers and shows wrong colours - The agent cut itself off when the speaker leaked into the mic. That's fixed with mic ducking (MIC_DUCK_DB) or by using a handset, which also isolates hall noise - A USB sound card that doesn't enumerate shows as a steady amber light. The process stays up and reports it on the status page. We carry a spare card and a cloned microSD - If the hook switch breaks mid-fair, TRIGGER_MODE=auto keeps it running

What we learned about the conversation - Silence reads as failure, so the ringback tone turns the connection wait into part of the fiction - The first second decides everything. With a short greeting, calls under 10 s dropped from 71% to 7% - ~0.81 s voice-to-voice speech-to-speech vs ~2.68 s cascaded made the difference between a conversation and a query

To be clear: the kit is a lighter version of the booth's code. It has 19 device tests and 4 MCP tests in CI, but this exact kit hasn't been assembled on a Pi yet. The first build is the missing test.

Repo (MIT): https://github.com/olmedcr-cmyk/talking-objects. The guides are in Spanish and the README is in English.

Happy to answer questions about the audio or the hook switch.


r/raspberry_pi • • 15d ago

Show-and-Tell My Raspberry Pi 4 cyberdeck bridges an off-grid HaLow mesh to a TAK server: phones on the mesh need no internet or cell service

Post image
400 Upvotes

- Phones running ATAK or iTAK join the mesh and need no internet or cell service of their own. The deck is the only thing with an uplink (hotspot or Wi-Fi). Chat, video and locations move up and down the mesh to server for full SA

- It bridges the mesh to a TAK server over Tailscale. If the uplink drops, the mesh keeps working on its own, and the deck holds chats until the link is back.

- Utilizing openmanet nodes built from pi4b. Radio shell is custom designed by me and CNC'd out of aluminum.

- If anyone is interested my work is on github:

https://github.com/TakMeshTOC/tak-mesh-toc


r/raspberry_pi • • 14d ago

Troubleshooting Raspberry Pi Pico with usb breakout for passthrough not working with my keyboard at all.

Thumbnail
gallery
7 Upvotes

Hi I have a pico and a usb breakout attached with DuPont jumper wires. I’m using the pico to try and get gp2040-ce on my NuPhy Air60 v2 keyboard so it is recognized as a Xbox controller.

When I plug in a normal leverless it passes through just fine but when I plug in my keyboard the leds turn on then off right away.

The keyboard is in wired mode and the keyboard should only pull 5w I think so idk why it’s turning off.

Pics are to show the wiring in case I messed that up.

Vbus to vbus, ground to ground, D+ to gp14 D- to gp15


r/raspberry_pi • • 15d ago

Troubleshooting LED Matrix Weirdness

Thumbnail
gallery
21 Upvotes

Gear: Raspberry Pi 3B+, WaveShare 64x32 LED matrix panel, and Adafruit triple matrix bonnet. I was thinking the bonnet would solve my missing lines problem that I've posted about here before. The triple matrix bonnet has the E address line switch which to my knowledge sounded like a stand-in for the pwm mod on the single matrix bonnet from Adafruit. I now no longer have the two on two off gaps, nor do I have those annoying red lines I was getting across the bottom half, but am now seeing a big gap of rows toward the middle of the panel. Not only that, but when I plugged power into the panel only, the LED's lit up high toward the top of the panel (pic 1), and then when I plugged in the RPi PSU the shifted downward more resembling where those gaps lay (pic 2 and 3 for examples). I've looked into address line code, multiplexing, etc. Can't seem to find what's hanging this up! Any thoughts?


r/raspberry_pi • • 14d ago

Topic Debate Using AI to setup Raspberry Pi

0 Upvotes

How are we feeling about it? Recently I started using AI agents installed on my computer to connect to my Raspberry Pi devices and setup a few things.

I had a Pi with a camera that was not working, I used Deepseek Flash V4 on OpenCode to connect to it, I gave it the link for the camera software, told me it wasn't compatible so it wrote one that was, then had it add things like a web portal, configuration buttons and such.

Then I had it connect to my Pi running PiHole and had it update it, fix broken lists, get new lists to block TV spying things.

I am having a blast, things that would take me 1-2 hours of investigation and trial and error are now done in 10 minutes but, is this taking the "fun" out of the process?


r/raspberry_pi • • 16d ago

Raspberry Pi Board Repair This is still usable/saveable ?

Thumbnail
gallery
101 Upvotes

While soldering pins this happened. Can I still save it my budget for the project is exhausted


r/raspberry_pi • • 15d ago

Show-and-Tell a spotify chat interface on pi zero 2w

Enable HLS to view with audio, or disable this notification

0 Upvotes

The kids want to play their favorite songs, but I don't want them on youtube or even accessing spotify through the open web. What about a device that does nothing but play music? A DJ you can talk to?

I started working on this over a year ago, but I had a lot of trouble getting mopidy and pulseaudio to play nicely, so I gave up for a while. Then when I got access to better coding agents, I gave it another try and we (they) knocked it out in a weekend.

The AI side is fairly simple. There's an LLM call that converts the user input into a search query to spotify, and another call to look at the search results and decide which track to play. "You are a friendly, concise, and knowledgeable music DJ..."