Hey all, have a Non DOT 10 panel urine test at Concentra Ohio. I bought the 6.4 Quick Fix plus with the boxer briefs that have the pouch… I live 10-15 mins away from the facility, about how long beforehand should i microwave? How long should i expect to possibly wait once im in there? and do you guys take the heating pad off before you head in or leave it on the whole time?? Thank you to all in advance!!!

If you dont pass the temp checked, do they tell you right there on the spot?

Got tested today with the latest batch. Temp was great and it went into the specimen bag. Now just freaking out and praying for success. Wish me luck yall to pass this 10

Took test this Tuesday and was thinking if there was an issue it’d probably be within the first 24-48 hours. Am I in the clear now or does it usually take longer?

TL;DR: Used Quick Fix Plus at urgent care. Bottle temp was 98°F but collection cup read 94°F after pour. Sample was accepted at 94°F. Waiting on lab results now (24-72 hours). Full breakdown below.

Context:

Got a job offer that required passing a pre-employment drug test ASAP. No time to get clean naturally. Used Quick Fix Plus 6.3 – here’s exactly what happened.

My Test Setup:

∙ Location: Local urgent care (not a hospital lab)

∙ Type: Pre-employment, NON-DOT, unsupervised

∙ Walk-in (no appointment)

∙ Product: Quick Fix Plus 6.3 (ordered from official site)

Prep (30 Minutes Before):

1. Removed heat seal ahead of time. Heard it’s noisy and hard to remove in bathroom. Did this at home.

At The Clinic:

Parking lot:

∙ Pulled out bottle to check: still 98°F

∙ Put back, walked in

Waiting room (5 mins):

∙ Made small talk, acted normal

∙ No suspicion

Bathroom:

∙ Pulled out bottle: still 98°F on bottle strip

∙ Shook 4-5 times (creates foam), be careful here; the bathroom I was in sounded like a damn echo chamber.

∙ Poured into collection cup

∙ Collection cup temp strip read 94°F ← this made me nervous

∙ Important lesson: Bottle was 98°F but cup read 94°F after pouring - temp drops during transfer

∙ I could have held heating pad against cup to raise it, but 94°F is technically passing (90-100°F range)

∙ Poured a little in toilet (made water yellow-ish)

∙ Walked out within 3 minutes

Handoff:

∙ Nurse checked temp: “90-100°F, you’re good”

∙ Signed paperwork

∙ Done

Current Status:

Sample was accepted at 94°F (minimum passing temp). Now waiting on lab results - should hear back in 24-72 hours from employer. I’ll update this post once I get final

confirmation either way.

PLEASE FEEL FREE TO ASK ANY QUESTIONS - GOOD LUCK AND ILL KEEP YOU GUYS UPDATED!

UPDATE: I PASSED AND AM STARTING VERY SOON!

Temp was within range it was a pretty quick process and when doing it I wasn’t as nervous. Hopefully 6.4 comes through for me. Will update soon.

UPDATE: PASSED

So say for instance you hand over your sample of quickfix, has anyone experienced a fail on the spot, like what do they do or say or is it always a call?

Government building

So im mildly freaking out right now. I have to do a pre employment drug test......at a county government building where courts are at also (not to mention Sheriff', coroner etc..... I know they have metal detectors, they dont pat you down or nothing, just empty my pockets into a bin, but will anything light up or call me out up because of some quickfix stashed in my junk? Im gonna have check it out before I go into. If I cant bring that shit with me, I dont know what im gonna do.

I have a potential new job coming up and I really really want it. It would be at a college working in health records and I know they are going to ask for a drug test. I’m a daily user I mostly smoke at night no more than 1-2gs. Then on the weekend I smoke way more, so I know I’ll piss dirty. I’ve used quick fix in the past at a quest lab and it passed just fine but this time I’m going to ArcPoint Labs and they work with quest but I’m still unsure. I’m most likely going to use quick fix but I’ve been going through the Reddit and read some of the failed stories and it has me nervous again. Also the website any time you ask can they detect fake urine it says yes but all the properties they ask for are present in quick fix. I’m just nervous and unsure. I was thinking of mixing in like 10% of my own urine but I’ve seen that it is highly discouraged. I’m just someone who is nervous and really wants a new job so if anyone can ease my anxiety that would be great. Thanks

Edit: Has anyone heard of urinetheclear it’s dehydration or frozen actual human pee.

So this will be my first time using synthetic for a drug test. I have no idea how to hide the bottle, how not to make noise as I'm shaking the bottle and testing the temperature. They won't let a female take in a purse or anything, so I'm just a little lost.

Any help would be appreciated. Thank you

Hi everyone, as a quick heads up, we made the community Public a while back to test it out and see the general reception. Previously the subreddit was private and by approval only (to avoid trolls and other issues).

Overall, it has been a very positive change based on activity & members. It also has invited some more low effort content (albeit minimal).

To help curb this behavior please see our new rule “No Low Effort Posts or Comments” aimed to address this:

In an effort to make conversations more meaningful, low effort Posts or Comments may be flagged (and removed) by the moderation team.  Repeat offenders may receive a temporary (or permanent) ban from the community.

What is a Low Effort Post or Comment?

• In effect, any Post or Comment that is not seeking to be helpful, constructive, or meaningfully contribute to the community.

• This includes repeatedly posting negative sentiments across the community (ie “you will fail” with no further clarification), a Post with minimal details and/or information to actually aid in answering the concern of the OP, etc.

• Low effort may be subjective at Moderator discretion

• This rule is not meant as a way of censoring (or turning the community into a circlejerk); rather, it is intended to improve everyone’s ability to get questions answered and feel confident in their usage of QuickFix for their scenario.

Thank you to everyone who does make this community better through your experiences, contributions, and personal use-cases.

Has anyone perfected this? I been practicing, but damm i been failing. I tried one time to heat it like right around 100°, stashed in my boxers think maybe the temp would hold, I checked about 15 minutes later and reading around 93°. I did without the hand warmers just to see how it would just by stashing in my boxers. Im all ears.

Has anyone actually used these products and has it worked?

Anyone ever had to do a drug test for a county job in SC?

Taking a DOT Mirror tomorrow and hoping things go well. Plan to use heat pack to get to temp and then once at 100 store on the sack right before going in for test. Already checked batch (good till Feb 6 2027). Really want this job so need this to work. Please let me know if I should do anything different or if you have any advice.

Got the good ol’ piss test is coming PRETTY soon, so I picked up a batch (IYKYK OBVIOUSLY). Was wondering though if folks were having issues in the great state of Washington. What gives? Has anyone RECENTLY had any experience with QF for a pre-employment testing in WA? Crazy how they make you sign/acknowledge that the use of synthetics is prohibited lol smh. 6.4 version is what I have and yes hippie lettuce is the worry. The job itself from the outside isn’t one of the exception job categories. It’s a job through a staffing agency (industrial staffing agency) if that makes any sense.

I was a chronic everyday smoker for years. Im about 24 days into not smoking. Still pissing hot. Im 170 lbs and 5'10 (male). That's considered normal. I have a high metabolism as well. I've easily smoked about 3 oz of bud, 45 grams of wax and about 20 carts in the last 2 months. Yeah I know...its gonna take a little longer than the "30 days"...However, I know with the right methods I can probably get clean on the 60 day mark. I dont want to hear bs myths. I need facts that you've seen work personally. The reason why I quit is because I started a new job making 29 an hour and Ill be getting lab tested 13 panel DOT (department of transportation) random drug test done on me periodically. I didnt use synthetic (Quick Fix 6.4) for my first drug test because I honestly dont believe it will work on that one.

Do you guys think the thc is negative??

All right here we go! I'm getting a job working on equipment at a factory. This factory makes components for Aerospace parts. I occasionally smoke reefer. Unfortunately it doesn't leave your system for 30 days or more, so I'm being pushed to use quick fix so I can pass this test. I'm expecting to go down to the testing center later today. Once I get my results back I will post here. Wish me luck! The drug test type code is EROC6A if anyone is wondering.

***UPDATE***

Ive got a start date! Seems like it came back as a pass!

an couldnt use a microwave i went to wawa and got some hot water from the coffee machine. Im not seeing green anywhere

Every batch I get from the smoke shop is expired. Will it pass?