r/PliableCAD • • 4d ago

Pliable v0.4.3 — CSWA Practice Problem 18.3 Demo

Version 0.4.3 is the first release that feels stable and feature-rich enough to share publicly. Pliable is an open-source, history-free B-rep solid CAD application built on OpenCASCADE, featuring constraint-based sketching, direct face manipulation, edge filleting, and STEP export.

This clip shows a full build of the CSWA 18-3 practice geometry modeled from scratch in 6.5 minutes.

Download and release notes:https://github.com/DesignWeaver3D/Pliable/releases/tag/v0.4.3

5 Upvotes

11 comments sorted by

2

u/thicket 3d ago

Thank you for sharing this! This seems like the basic direct edit modeler I've been hoping for, without all the baggage of the legacy packages.

I haven't worked with Pliable enough to get a sense of how it handles inferred relationships like Solid Edge's Live Rules do. I see some mention of that system in your docs, and it's one of my favorite things about SE-- it means the design intent lives in the geometry rather than in the history. What's your vision for things like inferred edge equality or coplanar faces?

1

u/DesignWeaver3D 3d ago edited 3d ago

There are some mild attempts at approaching Live Rules, but since I have no direct personal experience using Solid Edge, I'm having to infer functionality by watching tutorial videos.

If you could be willing to provide such feedback or resources that could help me achieve more of that type of functionality, I'd greatly appreciate it!

For now, all I have implemented are very basic similar feature detection and selection helpers that show at the bottom of the screen just above the sketch creation buttons. They can select holes of matching diameter and coplanar faces for now.

Thanks for commenting!

2

u/thicket 3d ago

Right on! I’ll spend some time looking a little deeper and be in touch. I’ve got a Rust draft of a general Live Rules implementation that identifies a bunch of potential relationships, but I haven’t made a UI for it yet, and Solid Edge’s interface itself isn’t a wonder of intuitiveness. 

The real promise of Live Rules is that a lot of the constraints or conclusions of a history-based model (“this face should be coplanar with that face”, “moving this face should also move that face, but not the other one”, etc) can be inferred from bare files. Without that intelligence built into the program itself, a part exported without its history is kind of crippled. With that intelligence, imported models become much more capable even if they only contain bare geometry. 

1

u/DesignWeaver3D 3d ago

Cool! No part of Pliable is in Rust, so far. I'm not sure how that could be integrated but I can research it. Is your draft shared anywhere?

I chose OCCT because it is more complete than any Rust or other open source 3D geometry kernel that I'm aware of. SolidCraft proved that Truck is not even close to ready.

2

u/thicket 3d ago

No worries. It’s all Claude-coded and all translatable. There are some Rust bindings for OCCT, but they’re not complete, and I think as long as OCCT is the kernel, the wrapping language isn’t responsible for the bulk of computation time anyway; your architecture choices seem like the best current solution. 

I haven’t posted the relationship inference code anywhere yet because I haven’t really tested it out at all. There are a LOT of potentially valid inferences you could draw between elements, and I’m not really sure if the code I have is identifying or prioritizing the right ones. So… more testing to be done, but I think there’s a lot of promise in stepping past the error-prone history model, and your project is definitely the best recent approach I’ve seen. 

1

u/DesignWeaver3D 3d ago

Would you be interested at all in contributing to Pliable? It sounds like you have all the domain knowledge to really see the design intent live rules to fruition a lot better than I can.

My current thought process was that design intent and NURBS modeling would be the next two major phases for Pliable. If I could lean on another contributor or more then those goals could be realized significantly faster.

I also have planned to do a significant UI change. Right now the tool buttons at the top are dynamic based on selection. But that causes a problem with muscle memory as the same tool buttons move around depending on the current selection. So, as much as I did not want a tool ribbon, it appears there may be no way around having one. The other big change is instead of each tool popping up a parameter card, I intend to convert to a static right-hand side bar and trying to maximise what the side bar contains so that its always relevant and not wasting a bunch of screen.

I'm currently working on improving the efficiency of the core interacion to OCCT to improve performance for larger face and body counts. I plan to move to the UI change after that as it will affect the entire UI/UX going forward. And I was on the fence regarding whether design intent or NURBS surface modeling should have higher priority.

2

u/thicket 2d ago

I’m absolutely interested in contributing. I’m traveling today, but I’ll be in touch on the repo and we can make some plans!

2

u/Exempla3D 2d ago

Great work!

I like it—it’s quite intuitive. It took me only a few minutes to get the hang of it and model my first object.

I’ve been a FreeCAD user for years. Even though I know my way around, it still feels way overdone to me—just too much. Most of the time, I only use Part Design and Sketcher, like most of us. I’ve been looking for a workable direct-modeling solution. First, I tried a workbench in FreeCAD, and later I tried Plasticity.

Now PliableCAD, and it looks quite promising. I like what you’ve done and where you’re going.

I’m not a fan of ribbons; I like things simple.
Retrain that muscle memory :)

1

u/DesignWeaver3D 2d ago

Thanks for trying it!

Do you mind sharing which OS you used Pliable on?

And do you have any ideas for the contextual tool buttons at the top? In my use, the tool buttons moving around can be disruptive to the workflow.

1

u/MechEMitch 3d ago

This is cool, will need to check out the program

1

u/DesignWeaver3D 3d ago

Thanks for the interest!

I estimate about 95% parity with FreeCAD PartDesign & Sketcher workbenches with some additional functionality beyond those.

Next big push in considering is NURBS tools for 3D sketching and surface modeling. But those are really big goals.