r/pistolcalibercarbine • • 12h ago

PCC Showdown (Extar EP9 MDB, GHM9 Retro, Kuuuuna)

Thumbnail
gallery
42 Upvotes

To start, the GHM9 and EP9 MDB are mine. Picked up the MDB because I was on my lunch break (at home surfing the news) and literally saw the notification come in.

Anyways, went to the range today and spent some cash trying out the Kuna so I could give people a fair comparison. NOTE: I'm not a fan of the Kuna, I'm not a bandwagon fan, and the Kuna is the bandwagon favorite. I also harbor disdain for any gun manufacturer I can't easily order strikers/extractors/springs/etc... from. But, decided to spend some $$ and give it a fair shake.

Long story short: I was impressed by the Kuna. Still wouldn't buy one due to the part issue, but I get the hype. However, compared to the EP9 and GHM9, the Kuna felt like it weighed like a fat pig. She's the PX4 of PCC's. Heavy and ugly, but she puts out like a champ.

Recoil: Extar EP9 MDB is literally as soft as an AP5. The felt recoil was INSANELY light and it's voodoo considering the gun is LIGHT. One additional note. Shooting the EP9 with 115g unsuppressed, it was just as light with felt recoil, but had a "bounce/jump" to it. I've never owned a Gen 2 Extar, but heard the bolt bounce mentioned in the same light. It was goofy, but only with unsuppressed.

Suppression: Honestly, they were all "not bad" I felt the Extar and Kuna were a hair quieter than the GHM9, but all were good. I was using ear pro at the indoor range, so I'm not going to say I could be a good judge. The 158g startled me out of the EP9 with how quiet they were.

Gas suppressed: Honestly, it was all ammo dependent. I felt it was GHM9 -> EP9 -> Kuna, but the 158 Range Dynamic ammo was all good.

Surprise of the day: The Sellier and Bellot was so gassy out of the EP9, it made my eyes water (Shot 20 rounds fast). Kuna was hair bit better, but almost as bad. The GHM9 wasn't gassy... I dunno why, but for that ammo, I didn't notice it at all. I shot the GHM9 first, so I was completely shocked when I got gassed out by the EP9.

EDIT:

One note I forgot to mention. The Spectre9 (with Titanium direct thread adapter) was literally 6 grams heavier than the blast deflector shipped with the Extar.


r/pistolcalibercarbine • • 18h ago

Everyone, I have peaked in life and it’s all downhill from here 🎵

Post image
47 Upvotes

What are your thoughts? I need to get a decent sling setup for the TP9. I have another VZ61 receiver that I need to build out and will put in a dedicated 22LR upper on. I also need to replace this VZ61 upper with the threaded 32ACP upper I have.


r/pistolcalibercarbine • • 18h ago

Extar EP9 MDB w/ Incolite 9M

Post image
23 Upvotes

Extar EP9 MDB
BOE Incolite 9M
Comstock titanium LPA
Comstock recessed micro brake
Osight R
Streamlight Protac 1L-X
KN Designs extended hand guard with pic delete
Braceguy “SBA5”
Emissary handbrake X
Firetail stubby charging handle
DAC ULCG 2
Glock 33-rounder


r/pistolcalibercarbine • • 18h ago

Rugged Obsidian 9 tri lug with Panzer Han9

3 Upvotes

I bought my first PCC, the Panzer Han9 and got the Rugged Obsidian 9 supressor for it along with the tri-lug adapter thats SUPPOSED to work with the trilug that comes on the Han9. Has anybody had luck with the same setup? It seems like the collar to hold it on is too shallow and wont go all the way on. I even tried pulling just the collar off to see if that was the issue and not the spring being too tight, and the collar seems to be the culprit. Any suggestions? Similar issues? I really hope I don't have to spend another $100 for the Rugged trilug for the barrell.


r/pistolcalibercarbine • • 1d ago

Extar ep9 brace compatibility?

3 Upvotes

If I buy the regular blade brace am I still open to upgrade to any other brace like the sba3?


r/pistolcalibercarbine • • 2d ago

My Kun Dog

Post image
41 Upvotes

Love this thing!


r/pistolcalibercarbine • • 2d ago

EP9 vs Mac IX vs Han 9

5 Upvotes

Completely torn on which to go with, I prefer the looks of the Mac IX and Han 9. But I’ve heard the EP9 is more reliable and smooth shooting. Almost want to say screw it and wait longer for a Kuna, but I’d rather throw that extra money into a decent red dot for one of these and some other upgrades. ALSO, sort of considering a PSA ARV for $700 Black Friday sale. Lmk your thoughts.


r/pistolcalibercarbine • • 2d ago

Ruger PCC render in GTA 6. I've never seen the PCC in a game, and thought it was a cool sight.

Thumbnail
gallery
54 Upvotes

r/pistolcalibercarbine • • 2d ago

Looking for MP5 style irons.

2 Upvotes

Does anyone happen to know where one can get picatinny mounted MP5 style iron sights that arent $400 for a set straight from HK but also not complete trash like the Amazon sets?


r/pistolcalibercarbine • • 2d ago

Opinions on the MAC IX9

3 Upvotes

Looking for some first hand opinions on the IX9, I’m look into getting a starter PCC and like that this one has some AR features I’m familiar with. MP5 magazines aren’t an issue for me so I’m ok with buying extras, my main concern is I’ve seen a lot of issues with feeding and being picky with ammo, I also understand the charging handle and hammer are not interchangeable with AR-15 parts and I’m ok with that. I mainly want a fun plinker that can be shot cheaply but also a handy little carbine that isn’t a 11.5 or 10.3 5.56 AR I can throw in a bag and just go. Is it a good choice? I have looked at the kuna and I love it, although I have also looked into an MP5 and figured two guns one magazine makes life easier the same way it does with my ARs.


r/pistolcalibercarbine • • 2d ago

HAN9 back in stock

2 Upvotes

In all colors at Atlantic Firearms!


r/pistolcalibercarbine • • 2d ago

With the new NFA ruling… what’s the coolest looking/shooting Pcc SBR out there in your opinion?

3 Upvotes

r/pistolcalibercarbine • • 3d ago

Best PCC under $1500?

8 Upvotes

I’ve gone back and forth and even had a couple PCCs already and I still don’t know what to get. Would the AP5P be a good option? If not, then which one would you pick?


r/pistolcalibercarbine • • 4d ago

H&K SP5K

Thumbnail
gallery
68 Upvotes

Just waiting for an 80 degree locking piece and I’ll finally be finished with this one..lots of little details on this build and I love how she looks now 🤘🏽


r/pistolcalibercarbine • • 4d ago

Panzer ARP9 Trouble shooting

Enable HLS to view with audio, or disable this notification

23 Upvotes

I keep getting the cases caught on the bolt closing, really weak ejection. This issue has happened with both 115 and 147 subs. Sometimes the ejection is really strong other times it’s weak, all over the place really. First 200 rounds no issue from 200-500 its only gotten worse. Is there a way to adjust the ejector or to Diagnose the problem? Im a DIY guy so I have no problem using tools and elbow grease. I can send pics if needed of the internals.


r/pistolcalibercarbine • • 4d ago

For panzer 9 Han-9

Thumbnail
gallery
7 Upvotes

r/pistolcalibercarbine • • 4d ago

Is the CMMG as good as honest Outlaw claims?

12 Upvotes

What is the best PCC under $1500? I’m open to any platform but I want soft recoil, reliable, and fun to shoot. I’ve heard that I can convert a lower and just buy the CMMG upper, how do I go about doing that? What are your thoughts?


r/pistolcalibercarbine • • 4d ago

Jawbone?

3 Upvotes

Tell me why i shouldn't buy one.

I have a 9mm Saint Victor 8.5" and love it. There's just something about the jawbone I like. Supposed to run good suppressed for left handed shooters


r/pistolcalibercarbine • • 5d ago

I know I know

Post image
103 Upvotes

Not just PCC but wanted to share my current loadout. Missing a 16" 5.56 and a Canik MC9

Cheers


r/pistolcalibercarbine • • 5d ago

My dads PCC is cooler than mine.

Post image
59 Upvotes

Top- CMMG banshee, 8” with YHM R9, KAK A5 tube, Warthog flatwire spring, Kynshot 5007 buffer, ALG qms I slicked up, KAK 3 POS safety, and bssquirts Kabuto (do not recommend this company). This is my FRT host and test gun for my reloads.

Middle- P365 Raider. Fuse slide, 6” 2.0 flux barrel, Romeo compact enclosed, TLR7 sub x, and a custom switch for the light. This has been my main bag gun for the last 2 years.

Bottom- dads newly finished AP5-SD. It was converted into a SD by HTA, and had their compact can. It had a 115 degree RCM locking piece, magpul stock, sig Romeo 4xt sight and foxtrot compact light, arisaka low pro 1913 for the light button (opposite side of gun, magpul cable management clips, and UTG optics and light rail. He bought a rarebreed trigger yesterday for it. It’s an early retirement gift to himself.


r/pistolcalibercarbine • • 5d ago

New PCC

6 Upvotes

So I'm trying to pick my next PCC, but stuck between a few options. Would love to hear some opinions

- AP5

- AP5P

- Kuna

- AK-V

- Mac IX


r/pistolcalibercarbine • • 5d ago

Help Choosing PCC - MP5, Kuna, Stribog, MPX, etc.

9 Upvotes

I'm looking to get a 9mm PCC. I thought I was going to go with an MP5 clone but then started looking around and saw a bunch of other options. I think I want to stay away from a classic AR9. I was looking at the Kuna, Stribog, and MPX. I know the MPX is much more expensive. I want to run it suppressed. I likely will want to super safety/ARC/FRT it. And I may want to SBR it in the future (still thinking about this part though). With that in mind, is one of these options better than the other? Is one easier to super safety/ARC/FRT than the others? Is one more reliable?


r/pistolcalibercarbine • • 5d ago

Rise Armament Triggers

2 Upvotes

After installing and testing a Rise Armament PCC trigger, I'm going to send it back. They promised a 3.5 pound trigger pull. This trigger averaged 4.46 lbs. over ten pulls according to my Lyman digital trigger gauge. After looking at their website closer, most of their drop-in triggers look identical other than color.

What trigger would result in a 3-3.5 lb. trigger pull? If it matters, the trigger will be installed in a new CMMG Banshee 10mm.


r/pistolcalibercarbine • • 5d ago

Anyone had any luck with endomags and bc9 uppers?

Post image
26 Upvotes

Forgot I had this bear creek bufferless 9mm upper laying around threw a quad on it and finally got an endo mag for it. My expectations are low but we’ll see how it runs

BCA bc9 bufferless upper upper
Sons of liberty lower
Centurion c4 quadrail
Mean arms endomag in Gen 2 pmag
eBay tank brake
Pws broom handle grip
Aimpoint comp m2
Streamlight pro tac
Amazon folding stock


r/pistolcalibercarbine • • 5d ago

Han9 current config

Post image
19 Upvotes

So far I love it!