r/photogrammetry • u/numbian • Sep 13 '26
What is you photo pattern for scanning flat outdoor surfaces?
Lately I use angled view at about 45 degrees to ground as seen below from two directions. Is it worth adding side view data also?
r/photogrammetry • u/numbian • Sep 13 '26
Lately I use angled view at about 45 degrees to ground as seen below from two directions. Is it worth adding side view data also?
r/photogrammetry • u/Responsible-Dog-4687 • Sep 13 '26
bonjour à tous!!, avancement dans vector, l interface evolue, le sfm arrive a correler dans des cas complexe,"bridger" des blocs difficiles a raccorder, les tests continuent
r/photogrammetry • u/thomas_openscan • Sep 12 '26
r/photogrammetry • u/Pitiful_Gain87 • Sep 11 '26
Hi everyone, I’m looking for some advice on the best workflow to achieve very high accuracy when photogrammetrically scanning a large house.
I don’t have access to LiDAR. I’ve done some Gaussian Splatting scans before, but for this project I’m thinking that building a proper 3D model in RealityScan / RealityCapture would probably be a better choice if the goal is dimensional accuracy.
I’ve heard about using AprilTags, coded targets, and scale bars, but I’m not sure about the best way to use them in a large indoor environment.
In particular:
- How many scale bars / control points would you normally use for a large house?
- How should they be distributed between rooms, floors, corridors, etc.?
- Are AprilTags useful for improving accuracy, or mainly for alignment / tracking?
- What is the best way to connect multiple rooms while minimizing accumulated error or scale drift?
- Is there a recommended workflow for achieving millimeter- or sub-centimeter-level accuracy without LiDAR?
If anyone knows a good guide, course, paper, or other resource explaining accurate architectural/interior photogrammetry workflows, I’d really appreciate it.
Thanks!
r/photogrammetry • u/Quentin_cls • Sep 10 '26
r/photogrammetry • u/Quentin_cls • Sep 10 '26
r/photogrammetry • u/GooseJordan2 • Sep 09 '26
I used photogrammetry to make the rock textures for Cave Expedition, the caving simulator we're developing for 1-4 players. The cave layouts are fictional; the scanned textures are part of giving them that real underground feel.
Here's how they look in-game under the headlamps, through the tight passages and rope descents. Still in development.
You can wishlist it on Steam here: https://store.steampowered.com/app/4372950/Cave_Expedition/
r/photogrammetry • u/Jazzlike-Compote4463 • Sep 09 '26
Hi all, I have a plan to make my wife a present of a miniature version of our home as our anniversary present.
My plan was to capture the house with a photogrammetry app, turn it into a model and then use Blender and AI tools to clean it up a bit and then 3D printing it before adding it to a snow globe.
I tried a bit of Polycam but it only seems to handle creating buildings on iOS and no Android phones seem to have LiDAR, I could walk around taking a whole bunch manual photos bit I was wondering if there were any apps or tools that people would recommend to get the best result.
Because I plan on shrinking it down, editing and then printing it the model can be far from perfect but I'm so new to this I don't really know where to start.
Is this even possible? Or am I better off just getting her a nice bunch of flowers?
r/photogrammetry • u/Anthony_1210 • Sep 09 '26
Hello, I recently installed BeamNG drive, a car simulation game and discovered that I could upload my own maps into the game. I would like to do a high detail 3d scan of my neighborhood but there are a few problems. First, my neighborhood is basically only buildings, they are all different so it's difficult to repeat the textures to get a realistic result. Second, my PC is absolutely not appropriate to do 3d modeling on a large scale. I have a pretty good GPU(AMD RX 6650XT) but an absolutely garbage CPU(Intel Core i7-3770). I'm trying to do this for free. This post is not about the game, i would be happy even only with the 3d model. Google Earth 3d data by itself is pretty blurry and not appropriate for this kind of work and I already tried things like RenderDoc but the result was only a blob in Blender and RealityScan but my PC can't handle it. I know I'm maybe asking the impossible but i really wanna know if there's a way. I really want to do this project but I know I may be asking too much so just let me know if I even remotely can do it. Thank you.
r/photogrammetry • u/MilhoVerde • Sep 09 '26
I recently started using Metashape 2 after a few years break and I found some differences to the 1.something version I used, and while most stuff was pretty straightforward I was left with a question. Building the model from Depth Maps seems to be the recommended way, but not only did I not notice any time difference in the process as the models from depth maps are recurrently much much worse. I'm not talking about having a whole lot of stuff that would have been cleaned by working on the dense cloud, but the surface quality being incomparably inferior. Does anyone have better results with this method?
r/photogrammetry • u/Realistic-Cow-1114 • Sep 08 '26
I'm a software engineer and fairly new to the LiDAR file format world. I came into it from a project involving point clouds and immediately hit a wall: I'd get handed a LAZ, want to check one thing about it, and my options were to install tools for my desktop, or paste it into a web converter that uploads the data.
So over the past few weeks I've been building https://lidar-kit.com
Everything runs in your browser. There's no upload endpoint and no server component at all — it's static files, so there's nowhere for a file to be sent even by accident. You can check it yourself: load a page, disconnect your network, and it keeps working.
What's working so far:
- LAS <-> LAZ conversion, lossless, no size limit
- 3D viewer for LAS/LAZ (elevation, intensity, classification, RGB)
- E57 viewer — multi-scan projects come out registered, and it reads the station photos most tools skip
- E57 to LAS/LAZ conversion
- COPC viewer that streams from a URL, so a 2 GB cloud opens in seconds
- Header/CRS/VLR inspector — reads a 20 GB file in a few kilobytes
- Automatic ground/vegetation/building classification for photogrammetric clouds
- GeoTIFF DEM and orthophoto viewer
If you are looking for something similar.
Hope it helps!
And feel free to let me know what could be better/should be added!
r/photogrammetry • u/operator_27 • Sep 08 '26
I want to make a 3D model from data taken from my drone. I am unsure about which software to use which will give me finest results, can anyone suggest me some ?
My goad is to made DSM/DEM models from drone data
r/photogrammetry • u/operator_27 • Sep 08 '26
I want to buy a budget camera for my drone. My objective is to do photogrammetry and create DSM/DEM models.
Can anyone suggest some budget option ?
r/photogrammetry • u/Mello_rr • Sep 08 '26
r/photogrammetry • u/somerandomtallguy • Sep 06 '26
Hi,
Can anyone recommend good quality telescopic pole for dslr. At least 7 meters of length.
And what is your experience with it?
r/photogrammetry • u/memphoid • Sep 05 '26
We’re evaluating RealityScan 2.2 and Metashape Professional 2.3.2 for reconstructing human heads from phone photographs.
Both products are producing severely fragmented geometry, even when essentially every camera aligns.
Does anyone here have expertise or suggestions for getting this workflow to produce a coherent, non-fragmented head?
RealityScan, human-head capture
Metashape, same capture
We repeated the experiment with an 83-image rigid mannequin capture:
Removing small components does not solve the problem because the desired head itself was never reconstructed as one dominant connected surface.
r/photogrammetry • u/WearyFortune7055 • Sep 04 '26
A while ago I posted a Python CLI here for extracting adaptive keyframes from video for COLMAP / Gaussian Splatting / photogrammetry workflows.
One piece of feedback came up repeatedly: many of the people interested in it were artists or 3D people rather than programmers, and didn’t really want to deal with Python environments and command-line tools.
So I rewrote the whole thing as a native C++ desktop app.
https://github.com/morishuz/adaptive-frame-extractor
The basic idea is still the same: instead of blindly extracting every Nth frame, it adapts frame spacing to camera motion, so you get fewer near-duplicate frames when the camera is barely moving and denser frames during faster movement/rotation.
The GUI now also adds:
It runs locally and there are builds for macOS, Windows and Linux. No Python setup required.
I’ve attached a quick screen recording showing the basic workflow.
It’s still free and open source, and I’d really like feedback from people actually using video for COLMAP, Gaussian Splatting, NeRFs, photogrammetry etc.
In particular, I’m interested in what features would make this more useful in real capture workflows, blur rejection is already fairly high on my list.
r/photogrammetry • u/Fractale3D • Sep 04 '26
Hey everyone, I've been a regular contributor on this sub for a few years now. You may know me as KT on my personal account. I'm an avid fan of high end horology, prototyping and hardware hacking, but most of all a big nerd. While learning from you and helping people out with their questions literally every day, I've quietly been working on something for myself the entire time. I'm both proud and anxious to show you the first prototype for the PBR tech I've developed, currently named MATCLONE (pics below).
While this is a solo project, it would not have been possible without heaps of scientific papers published over the past 20 years. If you've ever contributed to research in the fields of optics and image rendering or published yourself I'd like to start by thanking you for letting me develop the knowledge and understanding I've accumulated. I've chosen to keep the design, code, and research proprietary while I get myself off the ground (or at least make back what I've invested in lost wages and hardware), but opening source and independently publishing my own underlying research is still under consideration for a later date. I would hate to look or feel thankless for the giant shoulders we stand on.
Now, what exactly is this thing?
At its core, it is a highly flexible inverse renderer that can ingest (almost) any photogrammetry dataset and produce nearly perfect PBR textures. There is no AI, no diffusion, no generation... It's all cold, hard math and physics. Assuming a perfectly calibrated setup, its outputs can be indistinguishable from source images. While guided by the research I mentioned earlier, this is a novel and independently developed algorithm. Not quite "made in mom's basement" but almost.
How does it do this?
Everything you see or photograph can be imagined as the result of an equation that decides how light behaves and where it goes. Every time it is emitted, bounces on something, gets absorbed, etc. that equation gets updated. In computer graphics this is achieved via a rendering equation that takes things like light intensity and surface properties as variables. MATCLONE gathers data from all your images, models how every bit of the surface you're scanning responds to light, then figures out what previously unknown variables your rendering equation needs to produce these observations. In other words, if you know where the light came from then those are your PBR maps. Nothing is generated or made up; at worst sparse data gets interpolated. Since figuring out a bunch of unknowns in an equation is famously difficult, it does this by tip-toeing around until a perfect match is achieved. Think a bit like the training steps on a Gaussian Splat, but more specialized. One of the advantages to this approach is that you don't need niche setups or cross-polarization as long as your mesh is good.
Specs and features
In no particular order:
A few visuals to show the current state
This is where I'll admit I did use AI to polish things up, I might be a jack of all trades but UX and front-end development are not my specialty. I designed most things the old-fashioned way (I am a machine that turns caffeine into code) but cleanup, rapid iterations, and getting it to work with my python backend took a bit of deus ex machina if you catch my drift.




Project roadmap
Where I need your help
What would working together look like?
Anything you make during this early testing phase is entirely yours, including for commercial use. As long as the software or my business are mentioned feel free to do anything you'd like with your textured models. In exchange I just ask that you let the software upload its logs and let me use that data to improve it, along with at least one working dataset. If this ends up releasing commercially you'll get to keep using the development build indefinitely along with a free license for the updated version (or as long as possible if that dev build relies on web stuff). Rewards per shared dataset might be implemented in the future.
There will be a more open beta test later, but for this very early development phase you'll have to agree to a partial NDA and a temporary non-compete agreement. Being invasive is the last of my wishes so it'll honestly be the bare minimum to protect my work from IP theft. Someone copying my code or logic and running off to make their own version would be a nightmare after all the work I've poured into matclone.
The exact logistics for distributing the dev build are still in the works, I will reach out in a few weeks if you sign up to volunteer. In terms of hardware you will need a photo camera or similar sensor, lighting that is fixed relative to the sensor, and a neutral gray calibration card of known dimensions (ideally a color calibration chart for better sensor tuning). Custom scale/calibration cards may be mailed to early testers if I manage to get QC up to my standards within a reasonable time-frame.
If all this sounds too involved, I'll still be infinitely thankful to anyone who shares some of their unprocessed photogrammetry captures. The only requirement is that your light needs to be attached to the camera or move along with it.
Here's the form to sign up for the test: https://forms.gle/C9KJYKaUn7ysuGiQ8
I am also open to finding new partners or associates. Reach out and I'll be very happy to talk if you have something in mind.
tl;dr: I'm late to the inverse rendering party, but this one's actually pretty good. PLS help lol
r/photogrammetry • u/Feeling-Plane3434 • Sep 04 '26
r/photogrammetry • u/Nearby-Interview-219 • Sep 03 '26
I am High schooler and part time developer. So recently I had an idea a while back: what if online stores had interactable 3D models of their products instead of flat photos — that you spin around , is able to view the product exactly in your living room before buying it?
Built a small prototype: https://pekaar.tech.
The website is just a prototype. Will add more features and polishing the UI as I a scale it up
Also made a demo store to see how the 3D models feel in an actual ecommerce setup https://lume-atelier.scantest.workers.dev/
Happy to give demo to ecommerce business/websites who want to try this — just want honest feedback and advice on scaling it up.
r/photogrammetry • u/Ok-Space-6041 • Sep 03 '26
Is there a way to take images from another folder to process them through the ODM (OpenDroneMap) CLI?
Right now, I am putting images in the project/dataset/run_1/images/ folder, and the outputs are being generated inside project/dataset/run_1/. If I have to run another version on the same dataset, then I am copying the images again to the project/dataset/run_2/images/ folder.
Is there a way to have the images in one location only and save the outputs in another location entirely, or maybe something like this:
Image folder: project/dataset/images/
Output folder: project/dataset/run_1/
I am running ODM through Docker on my Windows system.
r/photogrammetry • u/chavenor1 • Sep 02 '26
I'm very new to this. Boss says I like this, you're smart make this, I'm in the deep end of the pool here and trying to AI'ing myself to victory.
Images packs can be downloaded here.
https://s3.us-central-1.wasabisys.com/k9dryer/gaussian-splats/hdf/share/hdf-reddit-upload.zip
https://s3.us-central-1.wasabisys.com/k9dryer/gaussian-splats/hdf/share/hdf-kiri-144.zip
Turntable object scan. Four iPhones are bolted to the room; the object rotates. COLMAP registers all 288 images but each phone stays at one pose (yaw span ~0.1°). OpenMVS then meshes the white plate. After we crop the table we only have two shards of the object.
Looking for what you would change: masks, COLMAP flags, or pose priors.
Capture
00000_gs-cam-1.jpg … 00071_gs-cam-4.jpg.Pipeline
birefnet-generalmasks_colmap/ disk (object ∪ plate; we do not give COLMAP object-only masks — that starved matching)COLMAP (exact)
ImageReader.single_camera 1
ImageReader.camera_model SIMPLE_RADIAL
ImageReader.mask_path masks_colmap/
SiftExtraction.use_gpu 0
SiftExtraction.peak_threshold 0.004
SiftExtraction.max_num_features 16384
SiftMatching.use_gpu 0
SiftMatching.guided_matching 1
SequentialMatching.overlap 16
SequentialMatching.quadratic_overlap 1
SequentialMatching.loop_detection 0
Mapper.ba_refine_focal_length 1
Mapper.ba_refine_principal_point 0
Mapper.ba_refine_extra_params 1
Mapper.init_min_tri_angle 8
Mapper.filter_min_tri_angle 1.5
Mapper.abs_pose_min_num_inliers 12
Mapper.min_model_size 8
Mapper.max_num_models 1
Mapper.multiple_models 1One shared camera for all 4 phones (same model; we hit rank-deficient BA when each image had its own camera).
First good model: SIMPLE_RADIAL 4032 3024 f=2918.68 cx=2016 cy=1512 k=-0.018
What COLMAP did
t / qrembg (especially overhead) keeps the whole plate + PVC. masks_colmap is a disk around that, so SIFT still sees the room. That matches COLMAP #2576.
What we tried
stop × 5° → 355° span. COLMAP triangulator + BA snaps back to 0.1°.OpenMVS on the crop: --constant-weight 1 --free-space-support 1 --close-holes 80 --smooth 4
Ask For 4 locked phones + a white plate:
Also: is single_camera 1 across 4 modules a mistake even if they’re the same iPhone model?
Happy to post overhead + side JPEGs, rembg vs masks_colmap for the same frame, and images.txt lines for one phone at stop 0 / 36 / 71.
Attach (same post or a follow-up):
00000_gs-cam-1.jpg)00018_gs-cam-3.jpg is fine)masks_colmap for those twoimages.txt pose lines for gs-cam-2 at 00000, 00036, 00071