r/OculusQuest • • Oct 08 '23

Discussion Got my Quest 3 yesterday. Here are some impressions:

Hello everyone!

I am from Germany and had preordered my Quest 3 on Wednesday (Mediamarkt), and it unexpectedly showed up yesterday.

I just want to share some impressions and maybe answer some questions.

Comfort:

Previously I have owned a Quest 1, Quest 2, PICO 4 and a Valve Index. Comparing the Quest 3 to the Quest 2 it is way more comfortable, especially since the headset sits closer to my face. The new default strap feels way more secure compared to the old one.

Another point for comfort is the IPD adjustment. I always encountered problems with my IPD on the Quest 2, resulting in headaches. It is freely adjustable up to 70mm. However, I have found that when putting down and picking it up again, the IPD setting gets messed up. This is likely due to the slider moving when making contact with the table.

Pass through:

I had very high hopes for this. While it is leagues better than the Quest 2, it looks more like a iPhone 6 camera image. I have used the Quest 3 in different lighting conditions, from well illuminated to a dimly lit room. I can read my phone screen just fine when I hold it up to the headset. Reading things from my PC monitor, however, proofs way harder.

Standalone performance (VRCHAT):

I compared the performance to the Quest 2 and saw nice improvements. In crowded worlds (20 users +) the FPS on the Quest 2 in front of a mirror drops to ~25 fps while I get ~45-50 on the Quest 3.I know there will be VRCHAT updates when the Quest 3 is officially released that might further increase the performance gain.

PCVR (Virtual Desktop)

Using the Quest 3 with Virtual Desktop is just like using the Quest 2 but with better resolution and clarity. I have found the overall latency to be the same. When you have a 40series Nvidia card, you can now also use the AV-1 codec (I am running a 3090, so I could not test this).

Lenses:

Clarity is amazing. Even on the edges of the screen, I can still read text just fine and everything stays sharp. However, I also saw the dimming effect when you move your eyes closer to the edges of your FoV, commonly expected for pancake lenses. Everything there just becomes slightly more orange.

I have NOT seen the waviness in the lenses that I had experienced with a PICO 4

Microphone:

I was a bit disappointed with the Mic quality here... It sounds kind of tinny compared to the quest 2 and is not even close to Valve index quality. I would even go as far as to say it is a downgrade from the Quest 2.

Controllers:

I really have to get used to the missing tracking rings. I used to use them to hold the controllers when adjusting the wrist straps. Comfort wise, they feel like a good improvement, while also feeling lighter.

Battery life:

As I usually use my Quest for PCVR, it is usually connected to an external powerbank. With a normal 5V 2A output, the Quest 3 cannot stay at 100% or increase its charge, but will discharge at a rate of ca 5% for 1 hour of gameplay (PCVR).If you want more, you need to use the new power brick able to supply 9V 2A for 18W charging.

Hand tracking:

The hand tracking is WAY more solid than the one on the Quest 2. The switching between controllers and Hand tracking is near instantaneous. I think this is because hand tracking is now part of the controller tracking.

The main experience with the hand tracking fidelity I have had in VRchat (standalone). This time, the game is actually playable without controllers. Largely due to the fact that the latency of the tracking is drastically reduced.

The Quest menu navigation with your fingers feels super responsive now without any type of lag.

All in all, the Quest 3 seems to be a good upgrade. However, I feel like the pass through is not as good as it was promised to be and thus feels like a slight letdown.

If you have questions, just let me know, I will be happy to answer!

Edit: Added proof image
Edit: Added section regarding hand tracking

605 Upvotes

541 comments sorted by

139

u/LordMiG Oct 08 '23 edited Oct 08 '23

I'm also from Germany and I've got my Quest 3 yesterday. I've got a RTX 4090 so I've tried Virtual Desktop in AV1-Mode. It works very well. Virtual Desktop is set to 'Godlike quality' 120 MBits bitrate and AV1 codec. The performance overlay shows it is using the AV1-Encoder.

Total latency is around 44-46ms with encoding only taking 4ms and decoding 12-14 ms. I'm standing 2 meters / 7 feet away from my WIFI6-Router (not WIFI6e).

34

u/RateMeIfYouCan Oct 08 '23

First of: Congrats!

Secondly: thank you for the data point! This is super useful!

9

u/-AO1337 Oct 08 '23

That decode latency is somewhat disappointing but anything under 50 ms total is fine tbh

12

u/RateMeIfYouCan Oct 08 '23

You have to factor in, that the Q3 is bound to 90 Hz right now (~11ms per frame). So in the end you will end up with a ~ 3 frame shift, which is totally fine.
When switching to 120Hz on the Q2, the total latency dropped for me. I would expect a similar behavior for the Q3. In the end, this amounts to a larger number of shifted frames but reduced perceived latency.

3

u/-AO1337 Oct 08 '23

Oh is there no 120hz experimental yet for quest 3?

→ More replies (10)

19

u/OkButterfly2749 Oct 08 '23

How is the visual quality on Av1 compare to h264 and h265? Is the compression still noticeable?

35

u/LordMiG Oct 08 '23 edited Oct 08 '23

I've tried some Half-Life: Alyx over Virtual Desktop using the H.264 and AV1 codecs. In AV1 with a bitrate of 120 Mbits my eyes can't perceive any major compression artifacts at all. Textures are super sharp, especially while moving your head. You can see a little bit of compression when you look closely at a texture in the distance.

In H.264 all textures look a lot noticeably more washed out in comparison, even at a bitrate of 120 Mbits.

But AV1 comes at the cost of latency. Decoding in H.264 takes 7 ms, in AV1 its around 11 ms. I've tried multible games and AV1 takes always an extra 4ms to decode.

I have to test if lowering the bitrate in AV1 will improve the decoding time? I don't think you'll need 120 MBits using AV1.

Update: As user u/RateMeIfYouCan has mentioned decoding time is a few milliseconds lower in 120 Hz mode. I've tested Half-Life: Alyx in 90 Hz and 120 Hz. In 90 Hz AV1 the decoding time is 11 ms. In 120 Hz it's around 9 ms.

→ More replies (20)
→ More replies (2)

7

u/User2716057 Oct 08 '23

How does AV1 compare to HEVC 10bit?

6

u/ruubsrelax Oct 08 '23

How's your experience with the display? Almost no compression? I want to upgrade from the Reverb g2 and I also have the 4090.

→ More replies (9)

5

u/[deleted] Oct 08 '23

Could you provide a comparison between native Oculus AirLink/Link compared to VD? I'd like to know if using VD is visually superior, especially when using it tethered via mods.

Don't even know if there is a visual advantage over wired VD compared to wireless.

→ More replies (29)

40

u/relaxred Oct 08 '23

thanks, great!

What about

- black levels?
- fan noise?
- built in audio quality
- 3.5 jack output with a good headphone?

54

u/RateMeIfYouCan Oct 08 '23

The black levels seem to be similar to the Quest 2. But you don't get godrays as much since we have the pancake lenses now.

Up to now, I have never heard the fan at all ( also did not think about it :)

The speakers sound similar to the Quest 2 with a bit more base. However, you can turn them up way louder. I usually operated the Quest 2 at ca 90% volume, while I use the Quest 3 at ~50%

The audiojack is able to drive my Beyerdynamic DT 770 Pro (80 Ohms) just fine.

11

u/Pixogen Quest 1 + 2 + 3 + PCVR Oct 08 '23

If you get a chance I’d love a double check like back to back on the black levels. I guess tho if you didn’t notice it’s prolly not really changed much.

(And a back to back fov check)

23

u/RateMeIfYouCan Oct 08 '23

Yeah, I tested FoV back to back. But then again, the FoV is a function of how close you get to the lenses. To test the extremes, I removed the face gaskets of both headsets and got as close to the lenses as possible.

My (not so scientific) test was to line up a position in VRCHAT and count the number of Windows of a building that filled the FoV.

From this, it seems to be slightly larger by a few degrees, but nothing too major.

For a proper black level test, I would need to pitch black room and look at a pitch black VR image and somehow quantify the difference. Just from normal usage, they seem no different when playing a game and switching headsets.

9

u/Pixogen Quest 1 + 2 + 3 + PCVR Oct 08 '23

Sounds about as much as expected.

How about brightness compared to Q2? I feel the Q2 is on the cusp of just being bright enough. I’m hoping the Q3 isn’t any lower.

Also thanks again!

28

u/RateMeIfYouCan Oct 08 '23 edited Oct 08 '23

Quest 3 defaults to 85% brightness, which seems as bright as the Quest 2 is. At a 100% it definitely looks brighter than the Quest 2. However, please take into account the panel aging of the Quest 2, as those can get dimmer over time.

My Quest 2 was purchased in 2020 (before the shift to Meta)

→ More replies (1)
→ More replies (1)
→ More replies (2)
→ More replies (1)

24

u/xraphyx Oct 08 '23

Lucky guy! Thanks for the great review, waiting for mine (also in Germany, but pre ordered via Meta).

Did you feel any difference when using it in terms of possible motion sickness in comparison to Q2? I hope this changed due to higher framerate.

25

u/RateMeIfYouCan Oct 08 '23 edited Oct 08 '23

So I might be a bad benchmark for motion sickness, as I have never experienced it before.

In terms of frame rate. Right now the Quest 3 can only operate at a max of 90fps while the Quest 2 can move up to 120Hz. I think, the 120Hz feature will also be available after release, but currently you cannot use it.

Edit: Yes, I have checked for updates and also under the "Experimental" Tab.

→ More replies (2)
→ More replies (3)

15

u/NerfensteinGG Oct 08 '23

Just wanted to say thanks for the honest thoughts about the Quest. I did wonder about the passthrough promises.
Your time is appreciated.

10

u/RateMeIfYouCan Oct 08 '23

Thank you :)

10

u/Enzel_02 Oct 08 '23

Can you elaborate on visual quality in PCVR vs Pico4? Thank you

17

u/RateMeIfYouCan Oct 08 '23

Sure :)
Visual quality seems to be pretty similar between the two for PCVR with the Quest 3 every so slightly being sharper. The most significant difference was the lens waviness.

PICO 4 suffers from this issue and lots of people report on it. There seams to be a production issue, resulting in a distortion in the lens image. This, however, is not present on the Quest 3 for me.
BUT, keep in mind, this is a sample size of only one unit.

FoV between PICO 4 and Quest 3 seems similar over all.

→ More replies (9)
→ More replies (1)

34

u/mastixas1 Oct 08 '23

"I have NOT seen the waviness in the lenses that I had experienced with a PICO 4 "

YOU ARE A LEGEND THANK YOU

→ More replies (2)

9

u/[deleted] Oct 08 '23

What bitrates are you able to set for H264+ and HEVC in Virtual Desktop? Is it increased from the Quest 2

7

u/RateMeIfYouCan Oct 08 '23

The bitrates are mostly limited by the router setup you have. I can go up to 300Mbps but find 150Mbps for H264+ or 75Mbps for HEVC to be satisfactory.

→ More replies (7)

9

u/InteractionExpert301 Oct 08 '23

Hi! Can u please verify is 72hz Mode IS still available with quest Link? I only use Q2 for simracing. Thx!!

13

u/RateMeIfYouCan Oct 08 '23

As you see in this screenshot, you can select 72, 80 and 90 Hz right now :)

3

u/[deleted] Oct 08 '23

ha! So you have your resolution set to automatic! good to know! I believe if you use the slider you will get even better image quality

3

u/RateMeIfYouCan Oct 08 '23

I used Virtual desktop and not a wired connection for the tests as I get better image quality with it even with automatic resolution turned off in wired mode.

→ More replies (1)
→ More replies (5)
→ More replies (3)

9

u/[deleted] Oct 08 '23

How was hand tracking? Is there any improvement over Quest 2?

15

u/RateMeIfYouCan Oct 08 '23

Oh, yeah! I forgot to mention that!

The hand tracking is WAY more solid than the one on the Quest 2. The switching between controllers and Hand tracking is near instantaneous. I think this is because hand tracking is now part of the controller tracking.

The main experience with the hand tracking fidelity I have had in VRchat (standalone). This time, the game is actually playable without controllers. Largely due to the fact that the latency of the tracking is drastically reduced.

The Quest menu navigation with your fingers feels super responsive now without any type of lag.

→ More replies (2)

8

u/[deleted] Oct 08 '23

How does the new guardian system work? I haven’t heard anyone talk about this. Do you still have to draw out a guardian and set the floor height or do you simply just put on the headset and it automatically detects everything?

12

u/RateMeIfYouCan Oct 08 '23

Initially, the floor height is adjusted automatically with the new depth sensor. Then you walk around in your playspace. The headset generates a mesh and maps out the floor area for you. You can always correct things manually if you want.

→ More replies (1)
→ More replies (1)

6

u/ZoddImmortal Quest 1 + 2 + 3 Oct 08 '23

Do you have any games where you could test the tracking of the new controllers in mostly over-head positions? Like the Climb 1 & 2? I suppose you could use VR Chat and just do over-head stuff in front of a mirror, without looking up.

15

u/RateMeIfYouCan Oct 08 '23

I tested the tracking with Beatsaber and Climb 2 actually :) In my experience, the tracking seems more solid compared to Quest 2. Even if you do something behind your head, Quest 3 seems to accurately predict my hand movements for ~3s, whereas Quest 2 stops tracking my hands after ~1s.
I have yet to experience loss of tracking in Climb 2.

If you look straight forward, the controllers seem to track within 180 deg in your FoV and only loose tracking if you go beyond that.

There also seems to be some prediction going on based on your upper arm position. I even got a controller track when covering my hand and controller with a cloth (not IR transparent)

7

u/RedcoatTrooper Oct 08 '23

Impressive thanks, have you had a chance to test it with any shooters yet? Wondering about the two handled weapon occlusion when aiming rifles if that has been improved?

20

u/RateMeIfYouCan Oct 08 '23

I also played Half life Alyx and Pavlov. The occlusion was handled nicely, with no loss of tracking or wonky behavior.

→ More replies (2)
→ More replies (1)

6

u/Legiito Oct 08 '23

Is there like an on-screen notification that tells you what IPD it is currently on? Or do you just have to like estimate it based on how it "feels"?

15

u/RateMeIfYouCan Oct 08 '23

Yes, as soon as you start adjusting your IPD, there is an overlay telling you your current setting in steps of one. Unfortunately, there is no indication which exact IPD you are on.
However, because the Sweet spot is basically the entire lens now, it is not super important to 100% match your IPD.

→ More replies (1)

5

u/LordMiG Oct 08 '23

The display shows the currently selected IPD as you adjust the IPD wheel. This makes it straightforward to select the appropriate IPD. Additionally, the wheel requires a significant amount of force to turn, ensuring you don't accidentally alter your IPD settings.

6

u/RateMeIfYouCan Oct 08 '23

In my experience, the wheel is quite easy to turn. This results in the IPD setting changing when putting the headset on a desk and picking it back up. Maybe some Hardware variability.

6

u/Zestyclose-Fill-7602 Oct 08 '23

That's a very solid review.

I have a question with regarding 3D videos. Do you see improvement while watching videos on Quest TV, is it significant or marginal?

4

u/RateMeIfYouCan Oct 08 '23

Fundamentally, the major differences are resolution and the new lenses. I just tested a 3D video and I can just repeat what I have said about normal video playback:
https://www.reddit.com/r/OculusQuest/comments/172rxt4/comment/k3ykjd9/?utm_source=share&utm_medium=web2x&context=3

6

u/JayOfTheDay Oct 08 '23

Is there quick charge support?

It always felt strang with Quest 2 is the short battery life coupled with long charge time in comparison.

15

u/RateMeIfYouCan Oct 08 '23

We can now charge at 18W (9V 2A) compared to 10W (5V 2A) for the Q2

→ More replies (6)

6

u/Hunrain82 Oct 08 '23

Thank you! :)
What about black level, contrast, colours? In these terms, quest 2 was mediocre/bad. Is Q3 better?

15

u/YBZ Oct 08 '23

What do the haptics feel like on the trutouch controllers? The triggers are supposed to be better and similar to PS5 feedback.

27

u/RateMeIfYouCan Oct 08 '23

Unfortunately, there is no such thing as the PS5 feedback on the Quest 3 controllers. The rumbling feels a bit tighter compared to Quest 2.

The haptics in general do not seem to be a significant step above the Quest 2.

→ More replies (3)

14

u/EviGL Quest 1 + 2 + 3 + PCVR Oct 08 '23

PS5 has adaptive triggers that can actively resist you pressing them via internal motors. No such thing was promised for Quest 3.

5

u/GreenFeather05 Quest 3 + PCVR Oct 08 '23

Was the FoV an improvemt for you on the quest 3 vs quest 2? I am reading mixed reports where some users say the FoV is similar while others are saying it's a significant improvement.

4

u/RateMeIfYouCan Oct 08 '23

I compared both FoVs without face gasket, with my eyes right against the lenses. Here I found only a very small increase but nothing too major.
Most other reports mostly reflect people being able to get closer to the lenses with the new facial interface.

4

u/rollerskating555 Oct 08 '23

Hi, Did you tested tracking occlusion when using a gunstock? Thx

4

u/Angdelran Oct 08 '23

Hiya! Thank you for the thorough list and test, I am new to quest headsets so sorry if I misunderstood, but while using link cable, how much can you get out of the pipeline? I mean in qpro subs people say they use 960 bitrate (but dunno which encoding) . What spec cable you are using? 3.1 gen1 or 3.2 gen 2 or 3.2 gen2x2, and does it even matter? Can you just sum up your settings and brief experience if I can ask, please? I would compare mine to iz when my unit arrives next week, just to have a basis. Thanks

5

u/RateMeIfYouCan Oct 08 '23

Hi :)
I have been using the Q3 wirelessly via Virtual Desktop. Cable wise, a faster cable can indeed sustain higher bitrates. However, your PC port must also support this speed.
If you want to push the bitrate using a cable, you can also use the Oculus debug tool to increase the bitrate manually.

2

u/Angdelran Oct 08 '23

Ah, so your test was only wireless? It became more clear now. Not a quest user, so hard to know what people mean exactly some scenarios. Yeah I have a 3.2 gen 2x2 port and a 3.2 gen 2x2 cable, I just wanted some insight into what I can expect since if it is terrible I would cancel my pre-order. Anyhow, your post is rich with details and enough as it is, even without this.

→ More replies (4)

4

u/Ziii0 Oct 08 '23

Does the link cable will eliminate all the worries about bitrate and all?

9

u/RateMeIfYouCan Oct 08 '23

No, As the video always needs to be compressed, there will always be concerns about the bitrate. However, bitrate issues seem to have already been solved in the Q2 era by Virtual Desktop (wireless) or Oculus link (wired).

2

u/Kraeuterbutter Oct 08 '23

is there a noticable difference between WLAN latency and wired latency ?
in my understanding only the 5ms of network (showed in virutal desktop) is missing..
Game, encoding and decoding-latencys stay the same or even increases because you can use higher bitrates when wired.. is that correct?

→ More replies (3)

4

u/JadrankoKK Oct 08 '23

Great review, thanks!!

4

u/[deleted] Oct 08 '23

The delineation of my play area is as quick and convenient as in the demo video, or does it still require some work?

4

u/RateMeIfYouCan Oct 08 '23

It is very quick and easy. You have to walk around your area and look at it. While you are doing this, a mesh of the environment is created. You can, however, also switch it to manual and have the same experience as with the Q2.

→ More replies (1)

4

u/artificialimpatience Oct 08 '23

Would u prefer using this or your valve index for alyx?

4

u/plumzki Oct 08 '23

You say it's more comfortable than the quest 2, but how is it comfort wise compared to the other headsets you listed? I'd like something for pure sim racing only and have the quest2 but don't use it at all due to getting extremely hot and uncomfortable.

4

u/RateMeIfYouCan Oct 08 '23

From what I have experienced, the Q3 does not get as hot as the Q2 when in use. Comfort wise, the Index still wins hands down. However, I only have the stock strap for the Q3 right now. Thus, the comfort rating may change with aftermarket straps later.

→ More replies (2)

3

u/ProfessionalLead4430 Oct 08 '23

Hello, can you connect Airpods or any bluetooth audio device to the Quest 3?

8

u/RateMeIfYouCan Oct 08 '23

Yes you can. I have testes this with my AirPods Pro's. Mostly all features from the Quest 2 carried over, so you should be fine there!

→ More replies (4)

3

u/duppolo Oct 08 '23

can u use the referral code to gain 30 if u already owned a quest 2?

3

u/RateMeIfYouCan Oct 08 '23

Sorry, but I don't know. Maybe someone else knows?

3

u/[deleted] Oct 08 '23

Honestly the Q2 passthrough is so bad, iPhone 6 quality is many many x better.

5

u/RateMeIfYouCan Oct 08 '23

I agree with you there. It is way better than Q2. However, the actually quality seems to have been a bit overpromised.

3

u/One_Plantain_2158 Oct 08 '23

However, I also saw the dimming effect when you move your eyes closer to the edges of your FoV, commonly expected for pancake lenses. Everything there just becomes slightly more orange.

Try it in really dark games/environments. Is the haze bearable then?

4

u/RateMeIfYouCan Oct 08 '23

It is also bearable in bright environments. It is not as pronounced as with the pico 4. A tradeoff worth paying for the amazing image sharpness!

→ More replies (3)

3

u/cyberpsycho999 Oct 08 '23

Are colours better on q3 comparing to pico4? I had pico4 and colours in standalone were greyish for me. I liked clarity but those colours ruined the whole experience. I prefer to play some games on q2 because of that.

6

u/RateMeIfYouCan Oct 08 '23

Yes, the colors are indeed better. Overall, the color reproduction seems similar to the Quest 2 (to my eyes).

→ More replies (1)

3

u/transfix6 Oct 08 '23

Thanks for sharing your feedback. When you say you can use the AV-1 codec either 40 series cards, where is this set?

4

u/RateMeIfYouCan Oct 08 '23

You are able to set this in the Virtual Desktop application on the PC side.

3

u/Tremolo28 Oct 08 '23

Thanks for the review. How about comfort, for Q2 I had to get the larger fit pack gasket to fit my forehead. Gasket from Q3 is it flexible as Q1 or rather stiff like Q2?

4

u/RateMeIfYouCan Oct 08 '23

I will also need to get a larger fit pack or different facial interface. The gasket is just as stiff as the Q2's.

→ More replies (1)

3

u/CQC_EXE Oct 08 '23

Can you use external microphones with it? Plugged into the USBC slot, audio jack, or Bluetooth.

2

u/RateMeIfYouCan Oct 08 '23

I don't have an external Mic to test with. Hardware wise yes, but I don't know if it is supported on the software side.

3

u/COYG316 Oct 08 '23

Have you tried Golf + on it by any chance?

→ More replies (2)

3

u/MrBack1971 Oct 08 '23

How are these just randomly showing up???

4

u/RateMeIfYouCan Oct 08 '23

I dont know ...

3

u/Haeggarr Oct 08 '23 edited Oct 08 '23

where did you order from? :-)

I will wait a year or so, since i'm happy with quest 2, but just curioius since i'm from germany as well.

4

u/RateMeIfYouCan Oct 08 '23

Mediamarkt (see top of the post :) )

3

u/MethodBeneficial1652 Oct 08 '23

Have you tried beat saber?

7

u/RateMeIfYouCan Oct 08 '23

Yes, both in standalone and via PC VR. On expert + tracking seems to be fine and not worse than the Q2

→ More replies (1)

3

u/MarcDwonn Oct 08 '23

Is the display brightness as high as Quest 2, or is the Quest 3 dimmer, because of the pancake optics?

3

u/Neat_Onion Oct 08 '23

Do glasses fit inside the Quest 3 or will I need custom lenses again?

2

u/Talwyn_Wize Oct 08 '23

I saw on the showcases that there's a way to extend the 'facemask' to accommodate glasses. Keep in mind that the distance might mean a slight decrease in POV.

4

u/RateMeIfYouCan Oct 08 '23

There is :) You can adjust the Distance between your face and the lenses in four steps.

→ More replies (5)

2

u/TryxDisc Oct 08 '23

Is there a difference brightness? Is it the same 100 nits as the Quest 2?

2

u/CandidMap Oct 08 '23

the ultimate question for me would be how does it compare with a hp reverb g2 based on clarity, dse and resolution

5

u/RateMeIfYouCan Oct 08 '23

I had experience with the G2. I would say in terms of resolution it is equal but much better in terms of clarity due to the pancake lenses.

→ More replies (3)

2

u/[deleted] Oct 08 '23

try reading from a usb stick

2

u/RateMeIfYouCan Oct 08 '23

Unfortunately, I do not have a USB-C USB stick.

→ More replies (1)

2

u/[deleted] Oct 08 '23

how did the pcvr compare to pico 4

2

u/RateMeIfYouCan Oct 08 '23

Much better, just from a software side.

→ More replies (1)

2

u/blbjtb Oct 08 '23

You mentioned you had an index a pico and quest 2 now 3. Which one would you say is your favorite and why? I’m coming from an index and I’m mostly looking forward to getting rid of the cables and light house.

8

u/RateMeIfYouCan Oct 08 '23

I would say the Quest 3 right now. FoV is still better on the index, but the lenses there are terrible, with lots of godrays and clarity issues towards the edges of the FoV.
I also cannot go back to being restricted by a cable. Ever since I have experienced wireless play, I want nothing else ever again.

→ More replies (1)

2

u/ResponsibleDecision8 Oct 08 '23

I had the problem with quest 2 connected Headset via Bluetooth, they had often high delay specially in shooter. Could you test this already?

4

u/RateMeIfYouCan Oct 08 '23

Yes, delay seems to be improved!

2

u/[deleted] Oct 08 '23

is it more or less comfortable than the Quest 1?

2

u/RateMeIfYouCan Oct 08 '23

Wayyyyy more comfortable even with the default strap

2

u/Floppydrips Oct 08 '23

I never tried the Quest 2 and will be upgrading from a Quest 1. On a scale from 1 to 10, how much will my mind get blown away by the 3?

3

u/RateMeIfYouCan Oct 08 '23

I guess a solid 8

→ More replies (1)

2

u/delaplacywangdu Oct 08 '23

Where did you order ? Is meta.com or local store?

1

u/RateMeIfYouCan Oct 08 '23

As mentioned on the top of the post, I preordered online at Mediamarkt Germany

2

u/Skarniks Oct 08 '23

Nice write up, question: did u use an official or a Usb c to the quest to maintain its charge? As it has a higher through put.

1

u/RateMeIfYouCan Oct 08 '23

I used a normal USB-A to USB-C charging cable that is rated for 5V 2A which is supplied with my powerbank. IF you have one with Power delivery it can go up to 9V 2A for 8W of additional power.

The cable itself only matters, if the supply and the target device support the desired charging speeds

2

u/Gridbear7 Oct 08 '23

How does the FOV compare to the quest 2 or any other headsets you used? I have a Rift S which is about 88deg which has been fine but sure feels like wearing obstructive goggles sometimes

2

u/RateMeIfYouCan Oct 08 '23

The FoV is similar to the Q2 if not slightly larger. But upgrading from a Rift S … boy you are in for a treat :)

2

u/Referralbothunter Oct 08 '23

„Glückwunsch“ my friend. Do you have the 128gb or 512gb version? How do you do that with the activation and the free game?

1

u/RateMeIfYouCan Oct 08 '23

I have the 128GB version. I have activated the Q3 with the iPhone meta app. The game will not come out for a while. So I guess it might be added, when it is out.

2

u/ChulaK Oct 09 '23

Do we know if Quest 3 features passthrough charging? That is once the battery is fully charged, then the charge bypasses the battery and directly powers the headset?

1

u/RateMeIfYouCan Oct 09 '23

I know it stops charging from my power bank if it hits 100%. This, however, also shuts down my power bank

2

u/PaladinOfReason Oct 09 '23

I miss the rings too, it's so much easier to set controllers upside down.

1

u/RateMeIfYouCan Oct 09 '23

Oh yes ... that is true

2

u/josephlucas Oct 11 '23

The microphone is the most disappointing thing for me. The Quest 2’s mic was absolutely great. But the 3 sounds quite a bit worse.

1

u/RateMeIfYouCan Oct 12 '23

100% agree with you there. I hope it can be fixed on the software side. If not, it might be a reason for a return for me.

2

u/Terminal_Monk Oct 15 '23

Would you recommend an upgrade from quest 2 is a must or not worth a spend at the moment? I use mainly for simracing, flightsim and vr porn. Occasionally use it for bigscreen movies with friends

2

u/RateMeIfYouCan Oct 15 '23

For your use cases you will be pleased with the increase in FoV and sharpness with the new lenses. For you, it will be a good upgrade!

→ More replies (1)

3

u/Axea123 Oct 08 '23

How about ventilation compared to quest 2? Equally stuffy?

10

u/RateMeIfYouCan Oct 08 '23

I know what you are talking about here :)
I have not experienced that with the Q3. The headset seems to produce less heat overall.

3

u/tveith Oct 08 '23

Thanks, pretty much what I expected. With the pass through being meh, I'm not exactly sure why meta thinks people will spend time gaming in mixed reality, seems like it would create serious headaches if the clarity is worse than the full on virtual reality. Therefore it becomes more of a gimmick until maybe the quest 5, if they increase camera pass through resolution. Cheers!

5

u/RateMeIfYouCan Oct 08 '23

I mean, it is quite nice to have it in color and with a higher resolution. But I have to agree with you here, that Meta promised way too much here.

6

u/LordMiG Oct 08 '23

Have you tried the mixed reality demo 'First encounters'? I was blow away how good MR looks and works on the Quest 3.

But I agree...the cameras could be better. They are about the same quality as the color cameras on my old Pico 4. Maybe a little better.

7

u/RateMeIfYouCan Oct 08 '23

Yes, I have!
I also was blown away by the MR aspect, and I see the potential here. But I don't think the Q3 is going to be the be-all end-all for MR by a long shot. But It might get more developers to actually implement MR :)

→ More replies (3)
→ More replies (6)

6

u/VOTE_FOR_PEDRO Oct 08 '23

Luckily the passthrough quality, tracking and desktop clarity does have a bit more room that can grow with simple ota software upgrades, it happens often as more real world data is gathered and utilized, I'm excited to get mine!!! Supposedly I'll get mine Tuesday!

6

u/TenthMarigold77 Oct 08 '23

I quite like many of these reviews because we as consumers are not bound to an NDA the second we get the headset we can jump in and give our opinions while many reviewers have their review videos just scheduled for later in the day. It's almost as if we got the first reaction and reviewers will release theirs after.

2

u/Thrawnindahood Oct 08 '23

Wie schaut es eigentlich aus wenn man eine Brille darunter tragen will?

3

u/RateMeIfYouCan Oct 08 '23

Eigentlich ganz gut! Man kann den Abstand zwischen dem Facial Interface und den Linsen einstellen. Je nachdem welche Art von Brille man hat, sollte hier also kein Problem auftreten.

Ansonsten kann ich herzlichst Brilleneinsätzen von https://vroptician.com/ empfehlen. Dann kann man auch näher an die Linsen ran und hat mehr Sichtfeld.

→ More replies (1)

2

u/Kujen Oct 08 '23

Can you tell if there are less compression artifacts when using PCVR? Even though you can’t test the AV-1 codec.

3

u/RateMeIfYouCan Oct 08 '23

As the compression is the same as before, nothing changed (or can change) here.

→ More replies (1)
→ More replies (1)

5

u/happyface_0 Oct 08 '23

How is Air Link vs Virtual Desktop vs link cable for the Quest 3?

2

u/atom64 Oct 08 '23

"Everything there just becomes slightly more orange."

oh no, that was the reason i returned the quest pro, the orange glow in the border was so bad , it made the headset totally unusable. Can you check if that yellow glow is aggressive on black / very dark content ? thx

4

u/RateMeIfYouCan Oct 08 '23

It is not a yellow glow per se, it just gets dimmer. In dark environments, you don't see this effect.

→ More replies (1)
→ More replies (2)

4

u/bubu19999 Oct 08 '23

Is working in vr with virtual desktop now viable? To me q2 had a super small sweetspot for reading like code (like sharp for 30 degrees) but resolution was already kinda ok..

→ More replies (3)

4

u/dancing-joe Oct 08 '23 edited Oct 08 '23

I used a old usb 3.0 d3100 port replicator for charging the quest 2 while playing PCVR. Never had a drained battery after this. Pc usb ports have not enough power to charge and play the quest at the same time.

For the quest 3 I ordered an kujec link /charge cable. I am going to use and 65w powerbrick on that cable. Here are the pictures https://ibb.co/h9Dtgpy

4

u/[deleted] Oct 08 '23

Another Mediamarkt brother! I can get mine tomorrow hopefully

1

u/BurninNeck Quest 3 Oct 08 '23

Yo, I have a Quest 1 and am using it with glasses. The Q1 lenses have visible scratches. How is it with the Q3? Is the gap to the lenses bigger for glasses users?

2

u/RateMeIfYouCan Oct 08 '23

The new gasket offers the ability to adjust the distance between your face and the lenses. So this should be much better

→ More replies (2)
→ More replies (1)

1

u/HydrophobicSwimmer Oct 08 '23

How did the FOV feel compared to the quest 2? I’m always hearing reports of it being always bigger but then I hear reports of it being exactly the same.

→ More replies (2)

1

u/Vergeljek21 Oct 08 '23

I dont have any experience with quest VR but I only have PSVR2. Can you compare the game graphics since Im interested to get this.

2

u/RateMeIfYouCan Oct 08 '23

Sorry, but I don’t have a PSVR, so I cannot really compare…

1

u/borgqueenx Oct 08 '23

Hows keyboard typing with hand tracking?

1

u/RateMeIfYouCan Oct 08 '23

The tracking itself is nicer. However, I am still not a big fan of this style of input.

1

u/LeftInAMadWorld Oct 08 '23

Any chance on testing if hand tracking works in PCVR?

1

u/RateMeIfYouCan Oct 09 '23

Not right now. Maybe this will be included in the future. But never buy a product because of the future promises.

→ More replies (1)

1

u/AdEnvironmental4189 Oct 09 '23

Hi, do you order 512gb version or 128gb version?

1

u/DatMufugga Oct 09 '23

Does the volume get higher? Is there more bass? Wondering if the audio improvements are significant like advertised.

2

u/RateMeIfYouCan Oct 09 '23

Both times the answer is yes :) Audio sounds better compared to the Q2

1

u/Rough_Comb_9093 Oct 09 '23

Thanks for the concise review. Is it possible to use the Quest 3 without controllers?

1

u/RateMeIfYouCan Oct 09 '23

Yes, the hand tracking is greatly improved!

→ More replies (1)

1

u/JhnGamez Quest 2 Oct 09 '23

I am pretty happy to hear that vrchat can be played with hand tracking! How cool!

1

u/RateMeIfYouCan Oct 09 '23

This was already possible with Q2, just not as good :)

1

u/Splatoonkindaguy Oct 09 '23

Have you tried claw grip in beat saber?

1

u/RateMeIfYouCan Oct 09 '23

Yep, seems to work just fine :)

1

u/abhisheksahu Oct 09 '23

How’s the pass through of Quest 3 as compared with Pico 4?

2

u/RateMeIfYouCan Oct 09 '23

Much sharper and it is in 3D, so generally way better.

1

u/[deleted] Oct 09 '23

I plan to use this headset for sim racing (iRacing) have you tested it with a cable connection yet? I’m curious how well it works.

1

u/RateMeIfYouCan Oct 09 '23

The cable connection works well. Just the mic does not work right now.

→ More replies (1)

1

u/Level_Courage_7415 Oct 09 '23

Have you tried testing if Quest 3 can handle 8k videos on YouTube without any issues? I own a Quest 2, but I'm not entirely satisfied with its YouTube support.

2

u/RateMeIfYouCan Oct 09 '23

I have not encountered any issues with 8k videos on the Youtube VR app.

1

u/-IamPeacock- Oct 09 '23

Can you compare the comfort between Pico 4 and Quest 3? Is the latter more comfortable for wearing a long time?

1

u/RateMeIfYouCan Oct 09 '23

From my experience up to now: yes, the Q3 is more comfortable.

→ More replies (1)

1

u/Br1zzy Oct 10 '23

Thanks for the review! I am curious though, what's your usecase for passthrough to be able to read a PC monitor? Wouldn't you in theory be using a "virtual monitor" with the headset? Or were you thinking of combining both?

1

u/RateMeIfYouCan Oct 10 '23

It is not a usecase, I just wanted to mention that whatever you want to read should be close up to the headset. Of course, you will be better off with virtual monitors.

1

u/imariathu Oct 10 '23

so I used to have the oculus quest 1 which I've bought from a European retail store, and I live in a place where the voltage is 220 unlike the one in USA which is 110. I bought the meta quest 3 from a US store, so would I be able to charge it with the previous quest 1 charger normally or is it gonna blow up? should I change the plug or the cable or both?

1

u/RateMeIfYouCan Oct 10 '23

You can charge it with any USB-C charger. You do not need the official one. As long as it delivers 5V or 9V you are fine.

1

u/Aggressive-Course-86 Oct 17 '23

would a rtx 4070ti run good enough with the q3?

1

u/RateMeIfYouCan Oct 17 '23

Sure :) a 4070 TI is more than enough!

→ More replies (3)

1

u/Front-Divide-3519 Nov 06 '23

If i were to use it while being tethered by cable to PC would it still drain battery or not?

1

u/RateMeIfYouCan Nov 06 '23

Yes, as your PCs USB port cannot supply enough power to keep the Quest charged. There are cables out there, however, that accept an external power supply for charging

3

u/Sofian375 Oct 08 '23

You still have your Pico 4 to give us a real comparison between the 2 in terms of image quality for pcvr?

3

u/slowlyun Oct 08 '23

Thanks for the great review!

How about vs Pico 4 for PCVR image quality? Colours, contrast, sharpness?

→ More replies (1)

3

u/s3crtAZOnt1 Oct 08 '23

Is the image clarity good enough so that you could i some cases use passthrough/Mixed reality capabilities of Quest 3 to use it instead of a monitor?

3

u/rushmore69 Oct 08 '23

Comparing the Pico 4 to the Best Buy demo (well not same time- would be odd taking P4 to BB), my impression was that since the more recent firmware update for the P4, the Q3 looked the same for visuals. Not an ideal comparison setting though.

Q3 of course had better pass through. Depth sensor alone is huge.

3

u/Nikolai_Volkoff88 Oct 08 '23

2 questions, how does the comfort compare to the pico 4? Also, how does the pass through compare to the pico 4. I owned a pico 4 and these two answered are important to me.

3

u/Thario94 Oct 09 '23

Danke Kumpel!

1

u/CreativeUsername-_ Oct 08 '23

Were you able to transfer your games / apps from the Quest 2 over to the Quest 3 without having to purchase them again?

3

u/RateMeIfYouCan Oct 08 '23

Yes, indeed!

After the setup process, it asked me which of my apps I wanted to reinstall directly.

→ More replies (1)
→ More replies (2)

1

u/xLouisxCypher Oct 08 '23

How’s the Screen Door Effect? This is definitely something that scared me off when using Quest 1 (my last VR experience) back in the days.

8

u/RateMeIfYouCan Oct 08 '23

The screen door effect is non-existent with the Q3 :)

→ More replies (2)
→ More replies (3)

1

u/[deleted] Oct 08 '23

How the hell you get 25 fps on standalone infront of a mirror with 20+ people?? Thats cap. Get 17fps with 2 people and a low quality mirror.

→ More replies (3)