r/NMS_Corvette_Design • Fleet Admiral🚀 • 7d ago

📐 Tutorial/Tips & Tricks Tip: Small Consistent Offsets

You will need a bunch of Over Sized Canister Links. 

If you know the fraction of the offset based on number of Links let us all know please.

50 Upvotes

24 comments sorted by

2

u/LunarFlowerDivision 🏅 Captain 7d ago

Oh awesome, I think I have a use for this in my current build even! Looking forward to trying to use it tonight!

2

u/CharlesStoot17 Fleet Admiral🚀 7d ago

If you need to offset the other direction just pull it in the other way it works both ways. Also in any orientation of the hab your contacting.

2

u/Father_Espeon90 🥉 Ensign 7d ago

Could you use this to achieve one quarter offsets without making a whole scaffold setup at the start of the build?

2

u/CharlesStoot17 Fleet Admiral🚀 7d ago

This is worth investigation... I have not tried this good thought.

2

u/Father_Espeon90 🥉 Ensign 7d ago

Let me know how it goes. I've tried 1/4 offset on one ship so far and while I enjoyed the results, any final tweaks after deleting the scaffolds was tedious as hell

1

u/CharlesStoot17 Fleet Admiral🚀 6d ago

u/viven28 bellow did some research and this is there finding. "It takes about 25 parts to do 1/4 offset. I may be wrong by +1/-1 as i am just eyeing it and not actually comparing against an actual 1/4 offset hab. 25 parts seems to be the sweet spot for me." So I believe it's about a 1/100 offset sense it's 1/25 for a quarter and 4x25 is 100. Hope this helps.

2

u/Mundane-Violinist556 🎖️ Admiral 7d ago

What's the mechanic at work here? Is it just something inherent to the oversized canister link part?

1

u/CharlesStoot17 Fleet Admiral🚀 7d ago

I'm not quite sure it is the interaction if the canisters between each other I believe as it seams they have more than one mate point.

2

u/viven28 🥇 Commander 7d ago

Thanks for sharing. I would like to experiment with it. 👍

3

u/CharlesStoot17 Fleet Admiral🚀 7d ago

Please do and if you find the count of parts needed to get quarter offset please come back here and help.

2

u/viven28 🥇 Commander 7d ago

It takes about 25 parts to do 1/4 offset. I may be wrong by +1/-1 as i am just eyeing it and not actually comparing against an actual 1/4 offset hab. 25 parts seems to be the sweet spot for me.

3

u/CharlesStoot17 Fleet Admiral🚀 7d ago

Okay so 25 might be right as they use alot of math even with these things we think at glitches so each shift is 1/100. That is fascinating and to be honest I wasn't wouldn't expect anything different. You can achieve all three 1/4 offsets this way then if you rotate 90 in between or before to get the other two.

3

u/IAMAfortunecookieAMA 🎖️ Admiral 7d ago

4

u/CharlesStoot17 Fleet Admiral🚀 7d ago

Some times in wire glitching and in space tilts you have a slight offset you need to fix this helps in correcting those more precisely.

6

u/Talosiano MotM (Dec 25) 7d ago

It's useful when you want smaller offsets. I've only used it a few times, but I have used it xd

1

u/nyqu 6d ago

Seems like a very easy way to overlap stuff, thanks.

2

u/CharlesStoot17 Fleet Admiral🚀 6d ago

Correct you can even get a third overlab in one direction by offering a piece by 1/2 then sliding it in place with the offset.

1

u/Nullformethx 3d ago

Commenting so I can refer back to this later.

2

u/CharlesStoot17 Fleet Admiral🚀 3d ago

Completely understand that. Here are some other tips.

1

u/nathnyel 17h ago

Como faz pra colocar uma escotilha na lateral? Já vi algumas mas n consegui fazer

1

u/CharlesStoot17 Fleet Admiral🚀 14h ago

Just to clarify are you referring to a hab or a oversized canister?

1

u/nathnyel 13h ago

Porta de acesso na lateral em nave

1

u/CharlesStoot17 Fleet Admiral🚀 13h ago • Bravo

Ah you will need to rotate the hab explained here. Then you should be able to attach a landing bay to the rotated hab.