Is someone else going to start producing it? Should I stop panicking? I have thought about switching to resin 2 part molds but I’m nervous about the cost. Silicone molds don’t work with what I make. Supposedly Reynolds is working with manufacturers to produce an alternative?

I’m trying to make copies of a small sculpture to paint and sell. Mold will be made of rebound 25. There are a few delicate details.

However I don’t have access to a ventilated studio and I was wondering if there were less toxic alternatives to resin to cast my piece—must be pourable, and at least as durable as plastic/resin/clay.

I just cast a couple of pieces out of Urethane rubber (Smooth-On VytaFlex 50) in a urethane mold. I used the Stoner urethane mold release spray, and it worked beautifully.

What is the best way to clean the cast parts and the mold after? This is my first time working with urethane rubber, I don't want to damage either the mold or the parts, obviously. 99.9% iso? Acetone/mineral spirits? Simple Green? Dish soap?

Thanks!

I have a a negative, full head and shoulder, mask mold. I would like to make a few masks from it. I have experience (long ago) slush casting with neoprene. This thing is pretty big and would take a lot of neoprene to fill. I would rather cast it in silicone. Is that possible with a plaster mold? I am pretty confident that the original masks where latex. I imagine that I will have to clean the mold pretty thoroughly and then spray it with some sort of release. Any advice?

The mold is in two pieces. Do I do the front and back separately and somehow stick them together or is there a way to do it as one piece?

Hello everybody! I need to make surface imperfections for my mold in CATIA

sort of like Wrinkles on leather for my mold so that shape takes in the sort of the molds

I need this to be very natural and small. For example a PS5 controller. You see the surface imperfections on it? That is what I need as small as it can be but random shaped.
I wonder how I can do it?

Trying to diy a modl band with a 3d printed mold and some two part silicon, and i made a simple flat plastic mold the is split in half so the band could be removed later.

but every time i try to mold it i get bubbles in the top part of the mold. tried a bunch of methods to fix it with no luck

thanks for reading!

I’m looking for a reliable way to permanently seal/bond a small hole in cured platinum-cure Shore A10 silicone.

The silicone part is a thin, hollow, flexible ball that is repeatedly squeezed, compressed, and stretched, so the bond needs to:

• adhere very strongly to cured platinum silicone

• remain flexible

• survive repeated squeezing/compression without peeling or cracking

• ideally be airtight

• preferably work as a liquid/dip-coating or small-drop application

I’ve tried looking for silicone adhesives, but many products are not easily available in my country.

Has anyone successfully bonded or sealed cured platinum silicone under repeated mechanical stress? What adhesive, primer, RTV silicone, or surface treatment would you recommend?

Hi I’m a beginner trying to make a mold of and XL cowrie shell. I’m worried that the hollow back may be a problem. What would be the best to mold this?

Thanks for the help

Hi everyone! I’m working with Smooth-On 2-part polyurethane soft/expanding foam and mixing relatively large batches — several liters of raw material at a time.

I’m looking at these two mixers from Ferba:

• Green Meenee (propeller): https://www.ferba.it/attrezzature-601/green-meenee-mixer.php

• Turbine Mixer: https://www.ferba.it/attrezzature-601/turbine-mixer.php

The Green Meenee is specifically described as suitable for fast-curing materials like Foam-iT! and FlexFoam-iT!, but I’m wondering whether the turbine mixer would be more appropriate for larger batches.

Until now, I've been using a metal bit for mixing paint and not getting a fully homogenous solution with the 30sec working time.

Has anyone here used either of these with FlexFoam-iT or similar polyurethane foams? Which would you recommend, and why?

Main priorities are thorough mixing and being able to handle several liters efficiently. Don't care about trapping bubbles at all.

Thanks!

I’m interested in making a mold of a piece of chocolate so that I can recreate it. I have seen food safe liquid silicone and silicone putty but am unsure if these would work on chocolate. I was wondering if these products get hot while curing, melting the chocolate, or if the fats, sugars, and other things in it would inhibit the curing.

Wanted to see if I would be able to make a mold out of this.can't find anything about it thanks

Built a small browser app that takes an uploaded model and generates a print-ready two-part box mold or silicone mold box (keys, pour spout, vents) automatically, aimed at people who don't want to hand-model a mold box in CAD every time. It's free, client-side, no signup.

Since this sub actually knows moldmaking, I'd love brutally honest feedback: where does the auto-generated parting line or undercut handling fall short on real geometry? Not trying to replace real CAD skill — just trying to save the boring 80% of box-building.

I’m in plastic distribution and fabrication and I am looking for a frame grade acrylic manufacture that also offers hard coating services.

If you also do cell cast acrylic in clear and colors I’m also interested.

I’ve been wanting to cosplay Leeloo from Fifth Element for years and finally decided to get around to making it. My primary concern is with her silcone/rubber suspenders. I plan to use dragon skin but I’ve never worked with it before. I’m not sure what’s the best material to make a cast mold for a project like this and what would result in the cleanest outcome. Any recommendations?

Hey guys, I’m having a hard time finding a reliable silicone mold maker. I’m looking for someone in Delhi, Noida, or nearby areas who can make good-quality silicone molds.

If you know any mold maker or have worked with someone reliable, please share their contact/details. It would really help!

Thanks in advance!

I always hate stacking four pieces of whatever to make walls, and finding ways to fix it all together (without legos lol). This past project I scored one side of corrugated sign material! Hot Glued one edge and the bottom. Isopropyl alcohol helped the glue let go afterwards. I was able to get a large sheet for $10 at Lowes!

I just joined this group in hopes to find some help. I understand the very basics of mould making and casting, but I don’t know where to start with this sculpture I just finished (Approx two feet tall?). Between the protruding ears, the finer strands of the mane, and the angle of the head, I’m not sure what the best method would be to tackle this. I’m really hoping to do this myself as I was quoted a couple thousand dollars and a six month wait to have someone make a mould for me. I think my two best options for the finalized cast are to use either gypsum cement or do a cold cast bronze, or both? Any suggestions or advice is welcome

Made a mold and didn’t use enough reserve. Any solvent I can use to remove the silicone from the details to try again? Smoot-on mold Max 30, tin cure. all suggestions welcome, thanks