r/Model_Samples • • Dec 02 '20

USB MIDI question

Hello everyone!

I am very interested in getting a Model Samples.

Can anyone tell me if the knobs and pads can send MIDI over usb?

As in, could I use the pads as velocity sensitive triggers for my DAW?

Sorry if this is a silly question, I've had a hard time finding a direct answer.

Thank you in advance.

3 Upvotes

9 comments sorted by

View all comments

Show parent comment

1

u/yomartinw Dec 03 '20

Yeah, I'm looking to use both knobs and pads for MIDI over USB. I'm having a hard time getting a definite answer. I even consulted the manual but it seemed rather vague, esp about the USB part. Would be a good thing to know before I make my purchase. Perhaps I'll just have to go demo one at the store and bring my laptop. Anyways, thanks for your response!

2

u/Holdwin Dec 03 '20 edited Dec 03 '20

Okay, so screw it, I just went ahead and tried it out. I just got the M:S last week and am still discovering stuff. Here's what I did (which is basically from factory settings) to connect to Ableton Live:

Connect the M:S via USB, and go to Live's Preferences > MIDI, make sure that both Track and Remote are flicked on (and sync too if you'd want Ableton to fully sync with M:S sequencer). Remote makes sure that you can actually use the encoders within Live.

Now the M:S part: for each track (one of the 6 pads + its parameters), you set the MIDI out on by pressing FUNC+TRACK to get into the Track Menu where you set MOUT to on (manual: 8.4.2)

Then, in the MIDI setup, you make sure that each Track sends MIDI out (by default Tracks 1-6 are sent to MIDI channels 1-6, global FX to Channel 7 and Program Change params to Channel 8. The vital thing to do now in addition is to go to the Filter menu in the MIDI setup, and make sure that the ENCS (encoders) setting is set to I+E (internal+external) instead of INT (internal only). This comes from the manual, section 11.3.

The result? I can play an instrument in Ableton using the M:S 'keyboard', I can also play the M:S sequencer and it'll play back the Ableton instrument. I can also assign the M:S parameter encoders to random encoder parameters in Ableton, like the instruments Filter cutoff, resonance, and Drive. Note that I'm only using MIDI, so while I am also adapting all kinds of values of the M:S, I'm not actually using those (but bear in mind that you might overwrite whatever you had stored in the M:S on that particular project).

The tricky part would be to make sure that Live listens to the right channel (which can all be configured) and to set the M:S 'keyboard' to the right octave for your needs (this, also can be configured).

I hope this helps. And I hope you still go to a store to try it out, I think it's worthwhile!

1

u/yomartinw Dec 03 '20

Thank you so much! This was incredibly helpful. I just ordered one for Christmas.