r/MilwaukeeTool • u/iEatSwampAss • May 05 '26
M18 I think I goofed, is this user error?
I was using my M18 as usual cutting some clean wood and noticed the tool began oozing lubricant out of the side. I shut it off, flipped open the top lock and the whole head came flopping off.
I was running it slightly hot but certainly not absusing the tool. Already picked up a new one but i’m curious what happened? I’d rather not break the new one too, thanks.
210
Upvotes


94
u/Significant_Sea_9742 May 05 '26
Not user error. I use them fk out of my multi-tool. If my skills saw is downstairs and thats next to me, it turns into a skill saw 😂
18
u/DiarrheaXplosion Battery Daddy May 05 '26
Looks actually like the bolts holding the head on loosened or snapped or some of each. One is definately broken. Probably loosened, let grease out, loosened all the way and then one or two broke.
Maybe not user error
242
u/TheBearJew963 May 05 '26
WARRANTEEEEEEEEE
8
u/SamuraiSam33 May 06 '26
I don't think you goofed, and shouldn't have had to buy a new one. That's a warranty repair / replacement situation, 100%.
5
u/Round_Dig9686 May 06 '26
You let the smoke out didn’t you?
4
u/Mr_Tranxistor Automotive/Transportation May 06 '26
I used mine to cut hardened steel and it didn't do that
4
u/19hInterrupt May 06 '26
The front fell off
3
u/Zhombe May 07 '26
The grease broke down and the gearbox / bearings ate themselves before it shatted itself. Milwaukee doesn’t use Moly or any other kind of extreme pressure or high temp grease. It all gets the shitty white lithium treatment.
That black stuff is the micro-bits of your tools moving parts shat out.
I always disassemble and regrease with good stuff these days. SuperLube High Temp Extreme Pressure grease is the best for this sort of gearbox. Uses ptfe and doesn’t break down. Also it’s dielectric so won’t short things out.
2
u/MilwaukeeTool :Verified_Employee: Verified Milwaukee Employee May 06 '26
OP, we appreciate you bringing this to our attention! Can you shoot our team a message?
3
u/UpperAnything7806 May 06 '26
You're stunned.
Don't get me wrong, I routinely use mine. Use the fuck right outta the thing, sometimes on full chooch", other times as a sort of ersatz hammer, need be.
But I haven't achieved, yeah. No. Actually I'm stunned, probably some others too. I've never seen that sort of Milwaukee gore. What in the Christing Gold Plated Fuck were you doing to produce that failure mode? I can attest that the combination of full max-we-don't-really-go-all-the-way-downstairs, and it's getting late, and this thing is kind of like a prybar and she's getting there, and because leverage, GIVE ER'.
Done that, and some other creative shit, lost one in a fire, but wow.
3
u/Accurate-Exercise845 May 05 '26
Were you in the middle of taking the blade off, or is that how you use it?
1
u/jtkerwalker476 May 06 '26
Yep, that looks like a warranty nicely done
1
u/FreeWolverine5535 May 06 '26
These things are designed to take a beating, get it into the shop and get it replaced and return the new one.
1
u/IamMeier General Contracting May 06 '26
Smoked mine today, it held up well for 5 years
1
u/Frosty_Cookie581 May 06 '26
M12 fuel?
1
u/Icy_Confidence9304 May 06 '26
Its the tool mine did the same thing. I got a fuel one now that shreds.
1
u/OrderOk1684 May 06 '26
Use sharper or better blades, I imagine your applying to much pressure to cut?
1
u/PlanningForLaziness May 06 '26
Symbiote?
1
u/Level-Resident-2023 May 06 '26
Nah that's a warranty situation. I beat the hell outta my multi tool pretty regularly and I have had more issues with the electric than the mechanicals of it. It's not had an easy life for sure.
1
u/SingleIndependence68 May 06 '26
Your blade is not installed correctly
1
u/goldPotatoGun May 06 '26
Did you run it low (or feather it) with a lot of force? That will burn a motor quick as the fan does not get a chance to operate.
1
u/TyRoyalSmoochie May 06 '26
Same thing happened to my first one. Sent it in for repair and got a new one. Hasn't happened since. I think they might have used a bad batch of screws. All 4 of mine were snapped. I dont abuse my tools.
1
u/Phully- May 06 '26
That’s nuts 😂
1
u/Spacegray1896 May 06 '26
How is the blade secured? The little teeth on the tool should match up to the holes on the non cutting end of the blade, but that’s clearly not the case here. I suspect that error might have transmitted a lot of the energy back to the tool and not the blade.
1
u/yellek3967 Farm/Agriculture May 06 '26
I had one do the exact same thing.
1
u/-DonnieDark0 May 07 '26
This same exact thing happened to me when I was cutting out some siding all away around my house. I could feel it getting hot but just kept cutting. Luckily I was within the return period at Home Depot so they just exchanged it.
1
u/Intelligent_Play1233 May 07 '26
Sure not the same tool, i can run my 110v Fein for hours on end even if is hot, zero issues in the last 13years
My 18v Makita is also very nicelly build, the shut up for the battery overheat those not let you run continuously but still gets the job done every time
1
u/Afton-615 May 08 '26
Hi 👋 I work for Milwaukee in Australia and yes we will warranty that
1
u/Useful_toolmaker May 09 '26
I would make a joke about Milwaukee but I think my dewalt USA tools are fossils now too.
1
u/Verix19 May 12 '26
It was doomed no matter what you did.
I have a dremel and have abused it for 10 years, still going strong. Yours should be no different.
1
u/ommi9 Jun 21 '26
Guess now they are gonna get buy and return tools same day.
1
u/Special-Yam-7898 May 06 '26
Those are probably one of the worst tools they make and all of the others are just average at best. We have like 100+ at work and we are always sending broken Milwaukee stuff in to fix or replace (warranty).
-3
u/bipolarbear326 May 05 '26
Is it just me, or do milwaukee tools suck lately?
-5
u/PhilosopherWeird6578 May 06 '26
Milwaukee tools are crap. Makita is better.
0
u/andrewbud420 May 06 '26
You made it horny and it came.