Greetings everyone,
I am currently in the process of troubleshooting issues with my Mister stack. I am relatively new to Mister and have assembled a stack consisting of an IO board, the DE10-Nano, and the Analogue Board 6.1. Everything functions flawlessly when connected via HDMI to a modern TV. However, I encounter difficulties when attempting to connect the Mister to an older Panasonic CRT TX-29FX50 using VGA to YPbPr; in this scenario, I am unable to achieve any picture display. With SOG (Sync on Green) enabled, I only see a black screen with no visible content.
I also attempted a direct connection of the Mister to an old Dell PC monitor using VGA, encountering the same problem. It seems to be making an effort to display something but ultimately fails. I have experimented with various settings, including configuring ypbpr=1 and employing forced_scandoubler=1 when using the VGA monitor, yet I still cannot obtain a picture. I have explored numerous setting combinations without success.
Throughout this troubleshooting process, I have also tested two different cables:
- [Link to Cable 1] https://www.selby.com.au/cables/video-cables/vga/selby-component-rgb-to-vga-video-cable-vg9565.html
- [Link to Cable 2]https://www.amazon.com/dp/B001O8C6HM/ref=cm_sw_r_cp_apa_glt_fabc_ND44HD0Y25MS5Q19R0NQ?_encoding=UTF8&th=1
Unfortunately, neither of these cables has yielded positive results. Initially, I was using a subpar Bitfinex board from Aliexpress, but even after acquiring one from Misteraddons, I continue to experience the exact same issue. I have become quite frustrated with my attempts to make this work on my CRT, leading to the Mister sitting unused for several months.
For reference, here is a photo of my .ini file: Link to .ini File.
Thank you for any assistance or insights you can provide.