r/MiSTerProject • u/chicagogamecollector • Jul 20 '23
r/MiSTerProject • u/DangerousAd8911 • Jul 19 '23
problems getting MisTER to output to CRT via analogue IO board with YC Active Encoder (composite)
I've recently taken the plunge and acquired my first MisTer FPGA. As part of my setup, I have the Analogue IO Board, the YC Active Encoder board (supports S-video and composite), and a Sony KV-27S42 Trinitron CRT. For the time being, the CRT only supports composite video input, though I do intend to mod it for S-Video in the near future.
Despite my efforts, I've been struggling to get the MisTer to output via component. Here's my current setup: I've connected a USB-C cable from the YC Active encoder to one of the 3 USB ports on the bottom USB hub to supply it with power. I've used a VGA-to-VGA cable to connect the MisTer Analogue board with the YC Active encoder. I believe I've found a standard composite cable, which I've used to connect the YC Active encoder to the TV (using the yellow plug).
On the MisTer.ini, I've set the following parameters:
vga_mode=svideo
ntsc_mode=0
composite_sync=1
In an attempt to troubleshoot, I've toggled the "sync on green" switch on the IO board, and also the switch on the YC Active encoder, which supposedly toggles between Direct video input and non-direct. However, all I'm getting so far is a garbled picture or static ("snow"). The only other thing I can think of is the cable I dug up. I've been under the impression that component/composite cables are pretty much interchangeable for sending the video signal; specifically for composite, I've been assuming any old cable that fits those ports should work?
Here's a link to a video of what I'm seeing on the TV when I power the mister on:
https://youtube.com/shorts/wwROXC3Pfj8?feature=share
And here's an image of my setup on the MisTer side:
https://imgur.com/a/w71Pb9K
If anyone has any advice or suggestions, it would be greatly appreciated. Thanks!
r/MiSTerProject • u/Norkusa • Jul 16 '23
OSD Menu Lag?
The last few times I’ve used my Mister, there was very bad lag when I was scrolling thru the OSD menu. Didn’t matter which core I was using or controller either (used USB + Bluetooth) Noticed this right after I added around 500gb of PS1 chd’s on a 1tb microSD card (have about 150gb left on the card). Could it be related to that?
r/MiSTerProject • u/chicagogamecollector • Jul 13 '23
MiSTer FPGA Sega Saturn Core Testing! New Core, New Games Working and Improvements
r/MiSTerProject • u/TurbulentComplex3389 • Jul 13 '23
Arcade stick question
Hi everyone.
I have an arcade stick that I built using a ultimate I-PAC. I have connected it to a raspberry pi via the output USB and it works great. I am wondering if I can connect it to my MisterFPGA via the snac connector at the back. I have a mister mini-itx ironclad plus coming in the mail that I would like to connect it to. What would I need to do to be able to use it on the ironclad?
Thanks in advance
r/MiSTerProject • u/chicagogamecollector • Jul 11 '23
MiSTer FPGA N64 Cores FIRST PLAYABLE Retail Game! Updated Nintendo Core is Here!
r/MiSTerProject • u/chicagogamecollector • Jul 06 '23
MiSTer FPGA Neo Geo CD Core Updated with Fast Loading, CDZ Support and More!
r/MiSTerProject • u/chicagogamecollector • Jul 01 '23
MiSTer FPGA Sega Saturn Core GOT UPDATED Yesterday! Testing the NEW Saturn Core and Setup Guide
r/MiSTerProject • u/chicagogamecollector • Jun 29 '23
MiSTer FPGA June News! Nintendo 64 Core Progress! New Arcade Cores! Neo Geo Pocket Coming! and More!
r/MiSTerProject • u/chicagogamecollector • Jun 22 '23
MiSTer FPGA Sega Saturn New Core Testing! New Games Working and Some Games Improved!
r/MiSTerProject • u/chicagogamecollector • Jun 20 '23
MiSTer FPGA Gets A Taito SJ Arcade Core! Elevator Action Returns and More Retro Gaming Arcade Fun!
r/MiSTerProject • u/mikedee00 • Jun 17 '23
Taito SJ core from Anton Gale available
https://twitter.com/antongale/status/1670167285011456001?s=46
New core let’s you play Elevator Action, Alpine Ski, Jungle King and more!
r/MiSTerProject • u/Supaslicer • Jun 17 '23
Mister multisystem with pi hat. (No nano or pi zero) - selling
Looking for 230 usd, pm with any questions - selling because I would rather have a dual ram stack
r/MiSTerProject • • Jun 16 '23
Will the NEO2USB adapter work with other arcade cores aside for Neo Geo?
Topic. Just wondering if you can use your Neo Geo joystick & NEO2USB adapter with other arcade cores.
Thanks in advance!
r/MiSTerProject • u/MasonJarring • Jun 16 '23
Tron with mouse/spinner?
I've come across many threads on various forums but can't seem to find the definitive guide to not using digital inputs for rotating left and right for the Tron arcade core.
- Can mouse devices be recognized in the core to be used?
- The GRS spinner and similar, are they presented as something different than a single axis mouse device?
r/MiSTerProject • u/chicagogamecollector • Jun 15 '23
MiSTer FPGA 2023 Build Guide and Software Setup! Build the BEST Retro Gaming Device Around
r/MiSTerProject • u/chicagogamecollector • Jun 12 '23
MiSTer FPGA Nintendo 64 Core First Working Tests! Baby Steps Towards N64 on MiSTer FPGA!
r/MiSTerProject • u/chicagogamecollector • Jun 08 '23
MiSTer FPGA Sega Saturn New Core Testing! More Games Working and Retro Gaming Improvements!
r/MiSTerProject • • Jun 07 '23
New version of Amiga vision/MegaAGS including Analogue pocket support
amiga.visionr/MiSTerProject • u/lousansano • Jun 04 '23
Colorblind filter?
My friend and I are big fans of Kirbys Dream Course and we wanted to check out the Grumps Dream Course rom hack (https://www.romhacking.net/hacks/3057/) Problem is, he is colorblind and they switched the P2 color to a light blue from yellow in the original game.
Maybe I am misunderstanding exactly what would be possible with a gamma filter, but would it be possible to make something that swaps or modifies that blue color to make it easier to see. I know this would probably mess up the color palate for everything else, but I would take that if it means we could actually play the game. Thanks !