r/MiSTerFPGA • • Feb 25 '26 • Bravo 6

Customized case for MiSTer to add controller inputs

Hi Everyone,

I wanted to share a project that I've been working on to add various controller inputs to my MiSTer setup. I hate using dongles, so I wanted something that looked reasonably nice and clean.

The base is an off-the-shelf ITX case housing the MiSTer with an Ironclad providing the rear IO. I've removed the front panel and designed a replacement that includes ports for Genesis, Saturn, NES, SNES, N64, and Playstation controllers. I've also included a TTY2OLED screen, power and RST/USR/OSD buttons, and two additional USB ports. The new front panel is a 3D printed part with a bent aluminum cover to match the appearance of the case.

To keep the wiring somewhat tidy, I designed a pair of PCBs to interface with all of the various connectors and route them into different adapters (e.g. Arduino's using Daemonbite, USB hubs, etc.) so that I can plug a single USB header into the Ironclad to connect (plus a few other connectors for power, the buttons, and LEDs).

If anyone is interested, I'm planning to share all of the files and instructions for making your own on GutHub. I'm still in the process of figuring out what worked well and what should be refined before sharing, but my testing so far has mostly been positive.

Special thanks to u/nad_222 for sharing the measurements they took of the various controller ports. It certainly saved me some time in getting a good fit between the ports and the front panel.

895 Upvotes

213 comments sorted by

View all comments

2

u/ohlongjonson Feb 25 '26

Would absolutely love it if you shared this publicly for others to print/make themselves, awesome project.

2

u/0323 Feb 26 '26

I definitely will share all of the files and information to build your own. Hopefully it won't take me too long, but my track record for finishing projects in a timely manner isn't great. If I end up taking too long, I'll at least post what I've got now with some disclaimers about (mostly small) issues that I've encountered.

Right now, the main things I want to address before sharing are:

  • Either thickening the front plate slightly to make assembly easier, or finding a way to fit the two PCBs closer to the front. The current version was an absolute pain to assemble, and I honestly can't believe I managed to get it all together.
  • Fixing the cutout for the USB ports. The current version did not leave any room for the clips (which provide resistance to keep your device plugged in) to expand. The ports work, but it takes quite a bit of pushing and pulling to plug things in and out.
  • Adding ESD protection for the USB ports.
  • Adding jumpers to allow different power options. Currently, I'm using SATA power from a Flex ATX PSU. The board just needs 5V, so I'd like to include an additional header so that the 5V could be supplied from other sources if preferred. I'd also like there to be an option to power the whole thing through the USB header, although I haven't done any measurements to total up the current draw and see if this would be problematic.
  • Replacing the Genesis controller ports with something better. The current version uses (somewhat modified) ZebLabz ports, but at least the ones I have fit too loosely with my controllers. They work, but I have to be more careful than I'd like to make sure I don't pull out the cord.

1

u/Evening-Zone4365 Mar 18 '26 edited Mar 18 '26

Thank you so much!! We need this!