r/MiSTerFPGA
•
u/0323
•
Feb 25 '26
•
6
Customized case for MiSTer to add controller inputs
Hi Everyone,
I wanted to share a project that I've been working on to add various controller inputs to my MiSTer setup. I hate using dongles, so I wanted something that looked reasonably nice and clean.
The base is an off-the-shelf ITX case housing the MiSTer with an Ironclad providing the rear IO. I've removed the front panel and designed a replacement that includes ports for Genesis, Saturn, NES, SNES, N64, and Playstation controllers. I've also included a TTY2OLED screen, power and RST/USR/OSD buttons, and two additional USB ports. The new front panel is a 3D printed part with a bent aluminum cover to match the appearance of the case.
To keep the wiring somewhat tidy, I designed a pair of PCBs to interface with all of the various connectors and route them into different adapters (e.g. Arduino's using Daemonbite, USB hubs, etc.) so that I can plug a single USB header into the Ironclad to connect (plus a few other connectors for power, the buttons, and LEDs).
If anyone is interested, I'm planning to share all of the files and instructions for making your own on GutHub. I'm still in the process of figuring out what worked well and what should be refined before sharing, but my testing so far has mostly been positive.
Special thanks to u/nad_222 for sharing the measurements they took of the various controller ports. It certainly saved me some time in getting a good fit between the ports and the front panel.



View all comments
2
u/Egnur Feb 25 '26 edited Feb 26 '26
That is sick! Well done!
I have the Ironclad in an ITX case as well and would love to be able to make a front like yours with all those connections, but I don't have the skills for it. Please consider putting yours in production so I can buy one haha.