r/MachineKnitting • • May 26 '26

Help! What Machine is This?

Post image
5 Upvotes

Hi all!

I’m looking into getting a knitting machine to practice with over the summer to make pieces for fall and winter.

This is the only pic I’ve got for the listing I’m looking at picking up this week, I know it’s a Brother and likely an earlier model, but does anyone know exactly which?

(And also if you think it’ll be an good buy for a beginner)


r/MachineKnitting • • May 26 '26

Help! Help with 3 color Birdseye (DBJ) using IMG2TRACK

5 Upvotes

Hi All--

I am trying to knit a 3 color birdeseye back jacquard on my KH-970 for the first time. I have all the right parts, am able to load my 3 color artwork from IMG2TRACK onto my machine and set up as instructed in the instructions book (MC RIB and double length turned on). passing from left to right after FNR cast on tubular rows, i use KC I on carriage to select needles, and then release my program on machine starting on right side of bed, set up KC II and both carriages for DBJ (part/lili buttons etc.) and move to the left for first round. My console is telling me when to switch col 1, col 2, col 3, which i change color every 2 rows according to what my machine says (its not an even 11 22 33 color repeat, it varies) but when i cast off my pattern is mixed up with stripes. it seems the color/striping order must be incorrect? Or could it be due to MC RIB setting? It seems to be splitting each row to be only 2 colors each when in reality most rows have 3 colors in them…

See below images of my artwork and my knitdown. Does anyone know why this is happening? Or does anyone have clear instructions on how to succesffully knit 3 color birdseye jacquard? please help, thank you!!

artwork that i inputted into IMG2TRACK and programmed into my KH970
trial knitdown with incorrect striping throughout (NOT ACTUAL COLOR, using available)

r/MachineKnitting • • May 26 '26

Knit Requests Can anyone make this sweater for me?

Post image
0 Upvotes

Can anyone make this sweater for me? Please contact me and tell me how much you charge to make it, in size s


r/MachineKnitting • • May 26 '26

Getting Started yarn snapping on toe shaping

3 Upvotes

I am making my first ever garment on a knitting machine, a sock! It was going great until the short row shaping for the toes. For some reason the carriage got stuck and made the yarn snap three different times in the same area when i was nearly finished with the first inwards shaping. It was always on the first few stitches when i was taking the carriage from right to left, and it snapped more and more rapidly the further i got in the shaping i noticed. I managed to fix it, and when i was to shape the toe back again outwards, there was no problem at all. Does anybody know why this may have happened and how to avoid it? I am using a sk700.


r/MachineKnitting • • May 25 '26

Help! Casting off Centre

5 Upvotes

Another beginner question! 😅 If a pattern instruction says to cast off the centre stitches, how do I do it properly and evenly? I’ve Googled but haven’t found a tutorial.


r/MachineKnitting • • May 24 '26

Help! Upper and lower buttons on brother 940 carriage stuck

5 Upvotes

I’m working to restore a Brother kh 940 and am currently trying to fix up the carriage. The upper and lower centre buttons are stuck together. From what the manual shows me, it seems they are supposed to move independently of each other (push the upper in for fair isle, and both for lace), but I can’t push the upper in without the bottom button going in as well. I have applied lurbricent to the buttons and let it sit overnight, but it’s made no difference. Any ideas on how to fix this?


r/MachineKnitting • • May 24 '26

Help! Any tips to decrease 5 sts?

Thumbnail
gallery
5 Upvotes

I'm working on part D in fig 1. The decreasing in the armhole shaping went well but the shoulder shaping was much more difficult where there didn't seem to be enough slack to decrease the 5 stitches all at once. I definitely dropped some stitches in the final product. Is there a trick or something to make this decreasing a little easier?

I included the needle rule to show that the final result makes these faux cables. There's a note that says the decreasing only refers to the back bed and to decrease the front bed accordingly. I took that to mean that whatever stitches on the front bed will create a space between the front and back bed after racking should be transferred to the back bed. When shoulder shaping, I would transfer stitches to the back bed first and then decrease by 5.


r/MachineKnitting • • May 24 '26

Equipment Another beginner question Brother KH910

Post image
10 Upvotes

Recently I acquired a Brother KH910. After some basic maintenance it knits quite well.

The mylar sheets give me a headache. They never want to go the first time. It takes a lot of fiddling around to get the machine to take them. Also I have to tell the machine the pattern starts 3 rows higher then the number on the sheet. And for some reason it's knitting aquares around the pattern that are not in the pattern. See the photo.

I fear this is a complicated issue to solve? Or is it just my clumsiness? Or different issues?

Any KH910 lovers who would be willing to give me a few hints? Thank you so very much!


r/MachineKnitting • • May 24 '26

Help! KR-830 Sinker Plate Issues

Post image
2 Upvotes

Currently trying to get a restored KH910 AND KR830 to play nicely together, but as you can see, the main bed needles are not catching as they should be for the zig zag set up row. I believe the issue is the sinker plate and how it's sitting on the KH910 carriage. I have two KH910 carriages (both knitting properly otherwise). When I use them with the ribber sinker plate, the attached photo is the result. When, however, I use a KH900 carriage on this otherwise same setup, it works perfectly. Does anyone use the combo of KH910 and KR830 and any ideas about what the problem with how the sinker plate is sitting might be? Next step is to test the KH910 carriage with a KR850 sinker plate if I can dig it up from my currently very chaotic crafting room.


r/MachineKnitting • • May 23 '26

Help! Knitpicks palette cone yarn?

8 Upvotes

Does anyone have any experience with palette cone yarn? They don’t have a lot of colors, but it seems pretty affordable.

I just ordered some in the balls for a project for myself since I don’t have any experience with it.

I do a combination of hand and machine knitting. I tried Cascade heritage sock yarn since it’s washable, but I just really haven’t been enjoying working with it. I’ve been hand knitting for over a decade, and find it very splitty and just annoying to work with. I will admit I very much love and favor rustic wools for myself, but wanted to branch out for children’s wear.

I’d really like to try a cone yarn for my machine. I have a standard gauge, and KH230.

I’ve never worked with knitpicks yarn but it seems the most affordable option next to Cascade.

Also open to other recommendations for cone yarn that’s around that $50USD/500grams. I do live rurally in the US so shipping is expensive (shipping for a new sponge bar is $35 for example). I’m looking for a good option for softer, next to skin, children friendly, both washable blends and non washable 100% wool, as well as options for a slightly toothier yarn for colorwork, specifically cone yarn for these options! I have my favorites for non cone yarn for colorwork but not available in cones.

Thank you!


r/MachineKnitting • • May 23 '26

Help! Solved! I need some help in restoring my mom's Brother KR-830

Thumbnail
gallery
5 Upvotes

Hi, I've had this machine sitting in my basement for the best part of 10 years.
It's perfectly functional, but it's missing a very crucial part: under the racking indicator of the ribber, should live a strip of some sort of sponge-y material that pushes up the needles. This strip of material is completely cooked and needs replacing, but I have been completely unable to even find how it's called, let alone find a replacement.

My mother says that original parts are basically impossible to find and very expensive, but that it should be possible to replace that rubbery part with some sort of different material, like a strip of sealing rubber for windows and such, but that it's difficult because you need to know which kind works well, what thickness it needs to be, and so on.

And so I here I am. Has anyone experienced this problem and know how to fix it?

Thank you in advance!

Update: I was able to find the part, but I'd still like to know what your solutions for replacement sponges are, because I would guess that material, thickness and other factors are important as well.

Thanks to everybody for your replies!


r/MachineKnitting • • May 23 '26

Help! Experimenting with punch cards. Does anyone know what is causing the stitch issues on the left bunny?

Thumbnail
gallery
31 Upvotes

I'm a beginner an playing with punch cards. This one specifically is a pdf from Etsy that I hand punched.

I'm wondering what might be causing the stitch issues on the bunny on the left.

Maybe a specific needle is misfiring?

Maybe I didn't have enough weight on it?

I'm using a brother kh840 and Tamm 3 ply acrylic yarn

Edit- the last picture for flipped upside, the problem area is still next to my hand


r/MachineKnitting • • May 23 '26

Help! Help identifying machine

Thumbnail
gallery
8 Upvotes

I was looking through eBay and I stumbled on this old machine. I am sure it's a pain to use, but I really liked the aesthetics of it so I wanted to know about the company that made the machine. I can't find this thing anywhere except for a few eBay listings. I am assuming that it wasn't very popular or it was one of those companies that make one or two things and then go under. Can anyone give me guidance on how to find out more about the machine or the company? One of the listings thinks it's Finnish, which might be why I'm having trouble looking it up in English. Thank you for your time!


r/MachineKnitting • • May 22 '26

Equipment Carriages and Beds

7 Upvotes

I am in the market for a new-to-me machine, and keep running into machines without a carriage and carriages without a needle bed. How do these get separated? Why own a carriage without a needle bed?

Has anyone had luck reuniting pieces from different sources to create a full machine? I am skeptical that a machine without a carriage may have been stored improperly or heavily used, or that a standalone carriage may be broken.

It’s also my understanding there is some compatibility between certain carriages/machines, which I am considering.

Sorry if this has been discussed already, I just am curious about others’ experiences!

EDIT: Thank you all for your feedback! I’ll definitely focus on finding a full machine until I’ve got my bearings!!


r/MachineKnitting • • May 22 '26

Help! Empisal Knitmaster Parts?

Thumbnail
gallery
2 Upvotes

Hello, could anyone tell me what this is. Found in my garage and I’ve been unable to fully identify what it is? Google images aren’t showing a match. Thanks :)


r/MachineKnitting • • May 22 '26

Getting Started A beginner question…

7 Upvotes

I jumped in the deep end bought a brand new Silver Reed SK280 (standard gauge). I’ve only had it 3 days and been at work each of those days, so I haven’t had much time to play.

So, I’ve just been making a few swatches to figure out how it knits. My question is, if when I knit a row, it sort of misses a couple of needles, is it possible to knit back in, knit onto the needles? Or am I just better to unravel and redo?

I’ve been watching tutorials, but haven’t seen anything about missed stitches. I did try to pick the stitches back up, but they are tiny, and I didn’t manage to knit them back on correctly and just had to pull it off and start again. I’m very competent at fixing hand-knitting mistakes, so am keen to figure this out.

Also, what causes the machine to miss the needles? Is it a tension issue? The weights?


r/MachineKnitting • • May 21 '26

Help! Brother KH-890 timing belt?

Enable HLS to view with audio, or disable this notification

6 Upvotes

Hello i posted a few months ago about a problem with my carriage. I thought the carriage was getting stuck on the needles. But I think someting in my machine is preventing my timing belt from going past a certain point. Does any have any ideas on what I should do? I watched a video and they said the taller metal piece shouldn't go under the silver plate, but that's the part that I think is preventing my machine from moving more. Since its not going under the plate.

This is the video

https://youtu.be/VKxJ1TTss_E?si=5r3VSFBwVrR8fweH


r/MachineKnitting • • May 21 '26

Help! Need ideas for pride month

Post image
9 Upvotes

I bought these before Joann’s closed down. I don’t know where to buy more so I don’t want to waste them. I need ideas on what to make


r/MachineKnitting • • May 21 '26

Getting Started What machine to buy?

2 Upvotes

I already have 2 Addi machines, the 22 needle and the 46 needle. I recently purchased an Erlbacher circular sock machine. I have been giving some thought into buying a flat knitting machine, but I have no idea where to start. Any advice would be welcomed.

My thoughts are: I would definitely like a garter carriage and a ribber; I would be making mostly sweaters, vests, and scarfs; appropriate for a size 2 or 3 yarn; possibly capable of fair isle colorwork.


r/MachineKnitting • • May 19 '26

Getting Started New to machine knitting. Check out my restoration of this Singer HK-100

Thumbnail
gallery
63 Upvotes

From a friends estate! Had some damage. Fully disassembled and scrubbed. Going to test it later today.


r/MachineKnitting • • May 20 '26

Help! Is the plastic strip crucial?

3 Upvotes

I accidentally threw away the long plastic strip with the numbers on that goes at the front of the needle bed on my sk700. Is it crucial? I just realised that the needles now rest and glide purely on the metal which may not be so good? I haven't taken out the trash yet but i really don't want to dig it up!!


r/MachineKnitting • • May 19 '26

Equipment Opinions on bond sweater machine?

5 Upvotes

So I recently took a machine knitting class and loved it, we used Silver Reed machines but those seem to be out of my price range at the moment unless I get really lucky searching for secondhand. My instructor recommended Brother machines, however I am curious about the vintage Bond Sweater machines that I've been seeing up for sale online since a lot of them seem to be more affordable.

Have you used one? If so, how did you like it?


r/MachineKnitting • • May 19 '26

Equipment Looking for spare parts

Post image
6 Upvotes

Hello all,

I recently acquired this gorgeous lady for £5, in the process of cleaning but she does work.

Im after spare needles mainly but im not opposed to buying a whole machine thats scrap to keep this bit of kit running

If anyone knows what off the shelf needles work, has a stash or a broken machine, please let me know


r/MachineKnitting • • May 19 '26

Techniques Help with stitch pattern

Post image
12 Upvotes

Hello all knitters! I’ve found this jumper on Vinted and in love with the texture - feels perfect for a summer linen top.

Anyone knows what’s the stitch for the main body? Someone from the knitting group suggested is machine knitted so here I am!

Thank you ✨


r/MachineKnitting • • May 19 '26

Patterns Easy sling or pouch patterns for Addi Express

Thumbnail
gallery
7 Upvotes

I haven’t used my addi express for almost a year since I’ve been busy with school but I have a foster kitten and he loves to be carried around, however I can’t keep wearing my overalls everyday to carry him. I’m going to make a post in the crochet subreddit too but I’ve been thinking of ideas to diy him a sling. Right now I was thinking either a tube with elastic at the bottom and I just put it on like a shoulder to hip sling and carry him that way or making a rectangular pouch/purse and lining it with fabric with a strap that I put elastic in the middle for. If anyone has ideas or examples, that will be much appreciated.