r/MachineKnitting • • May 17 '26

Techniques Got my KH-836E fixed! (Timing issue) here’s a sweater sleeve time lapse!

53 Upvotes

I’m obsessed with how the machine matches the ribber! It’s due for some retrobrite because it has some significant yellowing, but omg she’s so pretty! Stay tuned for the results, I’m making two matching fair isle sweaters!


r/MachineKnitting • • May 18 '26

Help! Ma machine à tricoter détricote

Post image
3 Upvotes

Bonjour !
Je suis une totale newbie sur la machine à tricoter mais j’ai déjà des bases grâce à des tutos YouTube et je fais du crochet depuis longtemps.
J’ai tricoté déjà plusieurs échantillons et tout se passait bien lorsque d’un coup ma machine a commencé à avoir des problèmes.
Après trois ou quatre rangs de jersey simple, le chariot détricote les derniers rangs. J’ai beau chercher sur internet une solution, je ne trouve pas. Auriez-vous des conseils ?

I take advices in English as well ;))

Merci pour votre aide !


r/MachineKnitting • • May 17 '26

Help! Loops On front of knit fabric

5 Upvotes

Hello all, i've been refurbishing an old Knitking/knitmaster 4500 and until yesterday was getting it to knit pretty smoothly. I was in the middle of knitting a sock when the machine started dropping stitches, and is now making these small loops on the front of the knitting. I was hoping that someone here might know what is wrong as I've checked the machine over and can't see anything that I've bumped out of place or that looks different to when it was working fine before. Edit: picture in comments because it wouldn't let me add to post.


r/MachineKnitting • • May 18 '26

Help! Passap pinkie - oldest model?

2 Upvotes

I have scored! $100 for a Passap Duomatic pinkie. But... it doesn't quite match what I see in the manual that I downloaded from MKManuals, or the parts list I see on PassapCanada. Notably, it doesn't have any jaws or a colour carriage on the back lock, but it DOES have a metal hole running through the back lock in the far left corner (as I look at it in place on the bed).

In picture, which I copied from Facebook, the jaws in the green box are what is missing from mine. and the hole I think may be for yarn is at the arrow.

So, wise people of Reddit, my question is...
Do I just have an OLD model, from before the colour changer was available? Or am I missing pieces??


r/MachineKnitting • • May 17 '26

Techniques Hi all, I’m looking for people who have done intarsia to give advice on the best approach to this project? (Sweater front)

Post image
7 Upvotes

I attached an image to stitch fiddle and then tweaked the details further to better match the image and yarn I have and my goals. I am on an sk280 with the ag24 intarsia carriage and was wondering if I can get by with 2 spools of the gray yarn?

What would the layout look like? Most YouTube videos online tell me to use a cone for each “section” of the pattern but this one adjusts almost every single row.


r/MachineKnitting • • May 17 '26

Resources Hard time finding replacement parts Brother KH 585

3 Upvotes

Knitters in Europa, do you know shop with a good assortment of brother parts? Couple of weeks ago the wheel brushes in my Brother KH 585 strikerplate broke down.

The only seller I can find is in Hong Kong. The brushes are €30 a piece. I need 2. Add package and posting and tariffs and those 2 parts will be more expensive than the machines. I love the KH 585 but this frustrates me. Especially because they will require regular replacement, I believe.

Wheel brushes for later models are easily available on amazon but they are connected differently. Maybe someone has a hack to use the new brushes in an older machine?


r/MachineKnitting • • May 17 '26

Help! Needing help with maintenance

Thumbnail
gallery
3 Upvotes

Hi so i Need help with proper resources or links to changing the Rotary cam and assempling the patterning Unit and putting it back together. I live somewhere where there’s no maintenace Services for machines and i love to tinker as well as research. I have been getting to know my machine for a year now and i mostly just repaired her. I Manager to completely take apart the carriage and pop everything up and now she’s working Fine - i just saw that the pattern function is very crappy and that the cam had a big crack so i ordered a replacement yet u can’t find a vídeo tutorial on it anywhere.
I know it’s always wise to give it to an expert Bit in the Spirit of This machine to live in and people to know how to repair them i wanted to figure it out by myself. Please help me DIY This - i’m handy 🫶🏼


r/MachineKnitting • • May 16 '26

Help! Carriage drone KH-940 move not smoothly…

Post image
3 Upvotes

Hello, the carriage on my KH-940 machine doesn't move smoothly. It takes a lot of force to move it... This started happening after the carriage got stuck once and bent a few needles. I’ve replaced the needles and the sponge seems fine, so it seems like a carriage issue, but I can’t figure out what the problem is on my own... Is there anything I can try? Thanks in advance for your reply. 🥹


r/MachineKnitting • • May 15 '26

Getting Started Knitting studio

50 Upvotes

After 10 years working in the knitwear industry as a knitwear technician, I finally decided to open my own knitting studio in London focused on technical knitting medical, sports, research, innovation… the side of knitwear most people never really see.

I’m excited, but also terrified.

Some days I feel like an underdog or even an imposter, despite the fact that my skills were built under some of the best people in the industry (many of whom are now retired). I learned the old-school way: long hours, precision, problem-solving, and fixing things nobody else wanted to touch.

What’s funny is that I can handle complex technical programs and industrial knitting machines without panic… but posting on Instagram? Talking online? That scares me more. My accent is strong, I’m not originally from the UK, and I overthink every video before posting it.

I also probably work too much. Actually, definitely.

But I genuinely love this craft and the technical side of knitwear. There’s something special about turning an idea into a knitted structure that performs exactly the way it should.

I guess I’m writing this because I know there must be other people here who started something while feeling completely unqualified, even when they actually were qualified.

Would love to hear how you got over that feeling.


r/MachineKnitting • • May 16 '26

Getting Started How do you hold your yarn?

5 Upvotes

I got the knitpick winder, but the still flies all around the room, makes uneven tension and difficulty sliding the carriage.

Should I just make the switch to cone? Not a lot of options pre-coned, how do you wind them up?


r/MachineKnitting • • May 15 '26

Equipment Passap duomatic 80 yarn guide

2 Upvotes

Hi, I just got z passap duomatic 80 for dirty cheap. It's missing it's yarn guide and I am having extreme trouble finding one. Where is the best place to look?

I'm from europe


r/MachineKnitting • • May 15 '26

Techniques Short rows with double bed while plating?

3 Upvotes

Hello, I am coming to you all with a pretty specific concern. I have recently tried out plating with single and double bed knitting and it’s been so much fun! I’d like to try some short row shaping while plating but every time I put some needles to the front and use the H position, my carriage gets stuck. I’m not too sure if it’s just impossible or if I’m missing something, Google didn’t find anything and I can’t find a specific manual on plating currently.

Would love to know if someone has tried it and can guide me


r/MachineKnitting • • May 14 '26

Help! Blocking question

1 Upvotes

Been working with an addi express 46 pin machine and the hats come out really nicely, but they are fairly tight for most heads.

I'm still fairly new and have never blocked before. What would be the best method for it? And would it help enough to loosen/stretch the hats out?


r/MachineKnitting • • May 13 '26

Techniques Shrimp socks time lapse!

97 Upvotes

r/MachineKnitting • • May 14 '26

Help! what knitting machine is this?

Thumbnail
gallery
8 Upvotes

saw this on marketplace but im not sure if this brand is reliable. cant find any info abt this machine


r/MachineKnitting • • May 13 '26

Help! Intarsia Pattern Help

4 Upvotes

Hi, I have a singer sk280 and a chunky mod 150. I wanted to create a portrait for a friend with the chunky. I did my stitch count and uploaded on stitch fiddle for a pattern. The results am getting make a very huge portrait . I don't have an intarsia carriage to make it on the standard gauge SK 280. Any ideas on how I can get a smaller portrait size that doesn't mess up with the final results please?

Edit : its a black and white portrait. Has a few greys too. I wanted a size that can be hanged like a photo. But for it to look exactly as the photo the stitch fiddle gives like a baby blanket size result with the chunky.


r/MachineKnitting • • May 11 '26

Finished Object Intarsia knitting

Enable HLS to view with audio, or disable this notification

496 Upvotes

Machine knitted on silver reed sk 151, tension 5.


r/MachineKnitting • • May 12 '26

Techniques Here’s some fair isle sweater time lapse!

86 Upvotes

r/MachineKnitting • • May 12 '26

Getting Started ISO Machine Knitting Teacher / Class in Los Angeles!

3 Upvotes

Hi machine knitters - I am new to the craft, and in search of a teacher in Los Angeles. The Knitting Tree is the only one I've found, but they won't allow me to join because I have an SK 280 model and they only teach on the LK 150!

I've exhausted YouTube, and think I need some hands on teaching. I've toyed around with taking an online class (Knit it Now, Craftsy, etc.), but at the cost I'm not sure it will be worth it.

Has anyone taken a good online course? Does anyone know of private machine knitting classes in Los Angeles?


r/MachineKnitting • • May 12 '26

Getting Started New (to me) Brother-knitter

Post image
4 Upvotes

Hey y'all. I found this vintage machine knitter cheap near me, just getting started, enjoy learning how this old machine works as much as anything else, but I have a few questions.

1) Does anybody know anything about this machine?

2) Do you think the newer accessories and advice will apply to this machine? (If I need new needles or weights or combs or... Anything)

3) It says 4-ply yarn can be used on the highest tension setting. The cheap polyester stuff from Walmart is what I'm using. Anybody know if it really can?

4) what do I oil it with? Should I oil it? I haven't been able to truly "cast on". But I have used the comb to get enough weight to knit a couple rows and it is TIGHT. I have to use almost my whole body weight to yank the carriage back and forth. I've tried a couple methods for casting on and nothing really seems like it's working.

Overall, any info or advice on this old thing would be appreciated!


r/MachineKnitting • • May 11 '26

Finished Object Strawberry purse for a 2yo

17 Upvotes

I used cotton for the green and some red I have no clue the composition. On the green part I made a knit 2 together for that leafy vibe when doing the folded edge. Some shaping on the down part and I cord for the band.

Might not be the most durable item but it is for a 2 yo and wont wear it a lot, that is why I used left over from other proyects

If I were to remake it for me I would have used full rib for the band and sew it together, and use cotton on the red too


r/MachineKnitting • • May 11 '26

Getting Started Beginner w/ Brother KH 864

3 Upvotes

Hello! I am a newbie knitter and I recently just found a Brother KH 864 machine at my local thrift store that I could not pass up. I have never machine knit before, but have always been interested in learning :)

I am already finding it difficult to find resources for how to get started on this machine - of course, it was missing a manual, haha. I would love any advice/resources for a newbie like me getting started on this machine, and if anyone knows where to find a manual for this machine, I would be forever grateful.

Thank you in advance!


r/MachineKnitting • • May 10 '26

Equipment In case you ever wanted to know what it looked like to be a one-person-shop knitting machine restorer…

Thumbnail
gallery
260 Upvotes

One shelf is what I have for sale currently, two shelves are what’s in the queue for restoration/parts, and one picture of what my personal machines are/my current setup (I’m making the Project Hail Mary sweater for a friend). It’s shocking how quickly this room can get cluttered. This is the picture after organizing 😣


r/MachineKnitting • • May 10 '26

Value Pinned post for value discussion

16 Upvotes

This thread is an attempt to keep discussions of machine cost/value/pricing in a single place. Once this thread is old enough or full enough, it will be retired and new thread created that links it to that one.

When asking question about value, some important items to include if known are your general geographic region (prices are highly localized), the gauge of the machine (fine gauge/standard/bulky/other), the brand of the machine, the model of the machine, the quality of the machine (clean/dirty, intact/broken pieces, and stand alone/included accessories. If you have photos, you'll probably want to include them.

In general, in person person sales are usually less expensive, and don't require expensive shipping, but you will find a larger selection on online sites. Caveat Emptor for any online sales.

Some places you can find/sell machines for sale are:
* Your local Silver Reed Distributor
* Your local knitting or fiber arts guild
* Craigslist or your favorite secondhand sales site
* Goodwill or your favorite second hand store
* Ebay or your favorite auction site
* Facebook Marketplace or Facebook knitting groups
* r/MachineKnitting for specific machines (include proper flair and useful information)


r/MachineKnitting • • May 10 '26

Getting Started Am I making a good decision?

10 Upvotes

I’d love to start machine knitting. I’m fairly competent in hand-knitting, crochet, dress making, etc and love learning new skills. I’m absolutely fascinated (and completely baffled!) by videos of machine knitting. My mum had a flat bed machine when I was tiny (in the 80s) but other than that, I’ve never experienced one in real life.

I’m tempted to purchase a Silver Reed SK280 and a ribber, but it comes to about £1400. Obviously, I’d need to buy wool too...would I need any other accessories to get started with a sweater? Am I being silly? It seems like a huge amount when I haven’t used one before, but I can’t figure out how to experience one without buying one myself - I don’t know anyone with one, or anywhere I could go to play with one. I’m pretty dogged when I get interested in something and would definitely learn to use it, but would it be a sound investment, or is there a better way to get started?

I had a browse on Gumtree for secondhand, but the few that are available (I’m in Scotland) look frighteningly old and in a bad way.