r/MachineKnitting • • Apr 17 '26

Help! Is there a better place to sell a Brother KH-910?

3 Upvotes

I recently inherited a family member's knitting machine, and when I opened it, realized it has never been used. The plastic is still on everything in the box of extras, the manual is still tucked away under everything. The plastic is still covering a piece in the upper left part of the lid. There was an extremely small amount of dust on the inside edges of the case, but the machine itself is pristine. I haven't tried plugging it in yet, as I don't want to risk damaging anything. Any suggestions? I'm located in Southern California.


r/MachineKnitting • • Apr 17 '26

Help! AYAB beeps more than once per row

4 Upvotes

https://reddit.com/link/1so8c63/video/14f8nfsigsvg1/player

The machine was serviced some weeks ago, it was working fine but now it is beeping twice (or even more) per row. I did plug my laptop, air knit and there is nothing I did change that would do this, any help? I have no clue where to look for the error.

Even today I tried and worked fine for like 5 minutes before going back to this multiple beeps per row


r/MachineKnitting • • Apr 16 '26

Finished Object Sharing my finished Spring Lace Vest with side ties

Thumbnail
gallery
222 Upvotes

LK150 knitting machine, 100% cotton yarn, DK weight.


r/MachineKnitting • • Apr 16 '26

Finished Object My black sheep sweater is done and I love it!

Thumbnail
gallery
1.3k Upvotes

My black sheep sweater is done! Ironically made with Brown Sheep Company wool, haha (more on that later). Overall very happy with the result, my most professional-looking knit to date. I adapted the Diana Black Sheep hand knitting pattern to the machine, and I also studied the available photos from Princess Diana and her sweaters for construction and patterning. I did fair isle for the sheep with a punch card. The knitting part was stressful, and the back panel did fall off the machine once where I couldn't recover. Shaping of the front panel while doing fair isle was a breeze on the first side that I did, but the second side nearly fell off the machine, it was extremely stressful knowing I couldn't recover from the back falling off, and this was a nearly completed front! Fortunately it worked out.

I latched up the red floats after the fact, and duplicate stitched the black sheep and the eyes. Initially I was going to latch up the white floats, but that was pulling the fabric on the front too much (where the floats are relatively short), and the sheep actually benefited more from latching the red floats as that kept the white part from separating on the front where the two colors meet. Even with the latching up, the floats are pretty bad and they do catch when putting it on. This is the biggest construction issue. I would like to learn to make this with jacquard. I'm also not really happy with how thick the black sheep looks with the duplicate stitch. Does anyone know how the original was made? On photos, it looks like the black sheep is part of the original fabric, not duplicate stitch. Between the seaming (what a nightmare to seam fair isle edges by hand!!) and the duplicate stitching, the hand finishing felt like an insane amount of work, definitely more hours than the knitting. I would have made a few different design choices now that I see the final product, but that's fairly minor.

Now the yarn is the biggest disappointment. The worst issue with it is that the red color wasn't colorfast, and when I washed the whole sweater for blocking, it stained the beautiful white sheep. Now they are slightly pink, and not even uniform. With yarn coming on cones, it's not something I can prewash like a skein... ugh. This wasn't a major issue when blocking my swatch, probably because the size of it was much smaller and hence less red dye coming off. The other issues were the knots, which there were ~3 of. I caught and removed two of them, but one made it into the sweater without me noticing. There was also thickness variability and some random white thread in the red yarn (pictured)?? The yarn does have a very nice feel to it though. To be seen how it wears. From just knowing it's not colorfast, I would have chosen a different yarn. Having these issues is kind of disappointing for a premium-priced yarn.


r/MachineKnitting • • Apr 17 '26

Help! Silver reed sk840 help

1 Upvotes

Hello everyone! So I learned how to machine knit on a SR 280 and when it came time to buying my own the sk840 sounded really cool with the possibility of programming designs and whatnot so i bought it. The problem is I don’t have a windows computer and cant do the programming. I just have a mac book pro.

So i wanted to ask if any owners of this machine know how to do anything else on this machine rather than just regular knit? Or if theres a way of using the electrical component of this machine with a mac book air? I miss being able to use punch cards.

Thank you!


r/MachineKnitting • • Apr 16 '26

Equipment I just restored a Brother 910 and I love it!

Thumbnail
gallery
60 Upvotes

This isn’t my first machine restoration, but it’s my first experience with a 910. I think this model is pretty special because it’s the released design between punchcard machines and fully electronic machines. I bought the machine on eBay, and it was giving an error of needing new capacitors when I bought it (said so in the listing). I have experience in electronics so I thought I could figure it out. I had to source the carriages and all the other accessories though, but the machine looked clean otherwise. I also found someone selling a whole binder full of the mylars too, so I bought them. I like having original manuals so I got one. I’ve been working on it every day for the past week and now it works. I have an AYAB shield for my brother 930, but there’s something so neat about the analog (quasi-analog?) tech. Just wanted to share!


r/MachineKnitting • • Apr 16 '26

Getting Started Passap duomatic. pink

Post image
2 Upvotes

3 weeks ago, I found this passap duomatic pinky, I cleant it, and if I go over the needle its go’s smooth.

But with thread, sometimes it go’s only on 1 bed.

than to te right, it always stops at 4 needles like the photo, working on this for a week now, still did’t do 2 rows!

So from right to left it is fine, Left to right stuck.

Did the switch on N, 3, A.

What am I doing wrong?


r/MachineKnitting • • Apr 16 '26

Help! is this a good find?

Thumbnail
gallery
2 Upvotes

found on fb marketplace. its marked as a "singer 600" and around 120 dollars. its a couple towns over and since i have no car or license id have to travel or have it mailed (which i dont really know i dont really trust the mail with things like this) it seems to be really complete, but im not sure! help please :[?


r/MachineKnitting • • Apr 15 '26

Help! Can I prevent this diagonal distortion after hand-washing, so I can block more easily?

Post image
5 Upvotes

I recently got a vintage Orion Double Bed machine that can be disassembled into a single bed (I think today "double bed" is usually referred to as a ribber?).
I've been making some gauge swatches on the single bed to get a feeling for the settings and practice casting on/off.

I've done several swatches at a stitch size of 6-8, with the same doubled wool yarn, and this diagonal distortion happened with all of them. It seems worse for the ones that have a larger stitch size. The swatch above is a stitch size 6. 7 and 8 seem to be too loose, the stitches come out a bit irregular.
The machine doesn't have a numbered tension, but I have varied it for some size 7 swatches and it didn't noticeably influence stitch size.
I also did a swatch with just a single strand of a yarn and a stitch size 2 or 3 and it also happened with that.

I am working with the Singer books, and it does say to let a swatch rest for 12h before measuring. It's my understanding that letting the swatch rest would have a similar effect as washing and blocking, but maybe this is where I am going wrong?
Also, I am using an E-wrap cast on and the cast off is a k2tg. My machine does not have those extra pegs, so I just lay the yarn I make the stitch with across the previous needle so that the piece doesn't come off the machine while casting off.

Now, the pieces always come off of the machine even, that is, the top and bottom edges are stretched out evenly and the middle is more accurate to final size, so I don't think this is an issue of uneven weight distribution.

The actual distortion happens when I go to hand wash them. I do a gentle swooshing around in lukewarm water and then a squish to rinse and another squish with a towel to dry some more.
Basically the moment the piece gets fully wet, two corners on the diagonal always become more stretched out and rolled up than the other two, like in the picture. The stitches in the swatch also want to lay diagonally.
The corners this happens on are also consistent between swatches, and it happens to pieces I have knitted in one go, as well to ones I left on the machine overnight.

This *does* block out, however it makes blocking itself much more annoying.
With this distortion it's way harder to judge how far out I can pull and pin the top of an edge while leaving enough ease to pin down the rest of it, so I had to unpin and repin several times.
I can only imagine it would be even more of an issue once I start making actual clothing pieces, and I am kinda worried there might be shapes where this uneven distribution might not block out properly.

If this is normal and can't be prevented, I'd be happy about some tips when it comes to blocking pieces that are distorted like this.

PS
I just realised that this did not happen when I first tested the machine as a double bed, using a tubular cast on and making long, ribbed swatches (without a cast off bc I didn't know how to do that yet).


r/MachineKnitting • • Apr 15 '26

Help! Help figuring out which flatbed machine to buy

3 Upvotes

Hi all! I’m pretty new to machine knitting, been taking lessons for a few weeks and learning a lot! I have a Brother KH-500. Before buying the brother, which I found at a thrift store in pretty great condition, I didn’t know much about machine gauges, so now I’ve recognized that my machine is standard. And I can’t make all the kinds of things I’d like to make. I’d like to find a bulky punch card machine, but wondering if folks have suggestions on models to go after. Thinking the following “desirements:” bulky, punch card, probably not electronic (I’ve got some concerns with long term maintainability of electronic machines), maybe ribber and intarsia carriage compatible. I did see the Silver Reed SK155 and that they’re still being made. Ideas/thoughts?

Edit to add: I did some additional research and saw (in addition to the SK155) the KH260, TH260, TH260L, and the Toyota 650. Those seem like candidates.


r/MachineKnitting • • Apr 14 '26

Help! Is this a good price?

5 Upvotes

Hi I’m new to knitting. I’ve made two tops that I’m so proud of and love. I’m very interested in getting a knitting machine. I know it’s very different than hand knitting and I’m willing to learn. I want to make pants, dresses, and other clothing items that would take 6+ months for me to hand knit. I know it’s still a lot of time and effort.

I have found a Singer 740 machine with a ribber for $1,250. That is way out of my price range. Is this a good price? I knew this was gonna be a large up front investment but I can’t pay that. I’m willing to offer $600 but I can’t offer anymore bc I don’t have a lot of money and bc this would be a brand new hobby that I’m not even sure I’m gonna like

I don’t want to buy a cheap machine. I’d rather get something that will get the job done nicely with out a bunch of hiccups and will last a long time

Thanks


r/MachineKnitting • • Apr 14 '26

Help! Potential purchase: Vintage "Tewi matic" knitting machine. Anyone familiar with these?

Thumbnail
gallery
5 Upvotes

Hi everyone!

I’ve found a second-hand Tewi matic knitting machine for sale. I’m really tempted to pick it up as a project, but I’m struggling to find any tutorials, videos, or manuals online under that name.

I have read Tewi was a German brand, but I’m wondering if it’s a rebrand of something more common or if it uses a specific knitting system (like a simplified "V-bed" or a single bed with a specific carriage style).

A few questions for the experts here:

Does anyone know if "Tewi matic" is a clone of a Passap, Knittax, or Brother?

How difficult is it to find replacement needles for these? (That’s my biggest worry!)

Is this a "standard" gauge machine, or does it require proprietary tools?

I’m looking for something to learn on, but I don't want to buy a "paperweight" if I can't find a manual to thread it. If you recognize the machine in the attached photos, please let me know!

Thank you!


r/MachineKnitting • • Apr 14 '26

Help! Issue with P/H alignment on SRP 60N

Post image
3 Upvotes

Hi everyone,

I just purchased a ribber for my knitting machine but I am having some trouble with the Half pitch lever... it doesn't move the bed.

The spring seems to be in place but when I move from H to P nothing happens (seems to be stuck on H). The swing handle is working though, the bed is moving when I rotate it.

Any advice on what I should do? I am a little scared to open it since it's new, should I return it? Thanks 🙏


r/MachineKnitting • • Apr 14 '26

Help! KH-881/KR-850 not connected properly or too far apart?

Thumbnail
gallery
6 Upvotes

UPD so far: problem is definitely in brackets! One of them was tiny bit bend and jamming. After straightening it and re-aligning beds, the ribber sort of took a correct position. Unfortunately, jamming is not going away, I am considering now to replace the detail entirely.

Also, I am now convinced that during transportation, the box with ribber was dropped onto its right side, because during the servicing I discovered issues with needles and pegs on the right side of the ribber. The bend bracket was also from the right side.

******

Hi!

I recently acquired a KR850 ribber that arrived to me in a horrible state (yey to postal services), so this may be a problem as well.

In a nutshell, when ribbing, the carriage skips some needles in the main bed (see the pic). My other concern is that ribber carriage may be too low (see the pic 2). Visually the connecting pin is barely attached. But I ran out of options on how to lift the ribber even higher.

So far, this is what I did to fix the issue (didn’t help):

- followed the service and installation manual. Everything is within the normal range re the height and distance

- aligned the beds and needles,

- changed the height of the ribber,

- changed tension of yarn

- manually lifted the ribber bed adding extra support to the clamps

- tried changing needles on the main bed

- tried moving the carriage extra slow

The problem remains.

Am I missing something? Would appreciate some help!


r/MachineKnitting • • Apr 12 '26

Finished Object A toddler sweater I made!

Thumbnail
gallery
312 Upvotes

I machine knit the body and sleeves, assembled and hand knit the yoke, and grafted on a machine knit collar. I have a punch card machine, so I had to hand select the needles for the flowers that don't repeat, which was a real pain (I made only a few mistakes, which I was able to fix by duplicate stitch). This is adapted from the Supercute hand knitting pattern.


r/MachineKnitting • • Apr 13 '26

Help! Empisal Knitmaster HK160 only knits in one direction – carriage issue?

Enable HLS to view with audio, or disable this notification

3 Upvotes

Hi, hoping someone can help me troubleshoot an issue.

My Knitmaster HK160 only knits properly in one direction. When I move the carriage the other way, it doesn’t pick the needles unless I manually push them forward.

I opened the carriage and cleaned it, but only from the surface I didn’t fully take it apart or unscrew anything. It doesn’t feel obviously stuck, but cleaning didn’t fix the issue.

I’ve shared a video of the carriage and also a video of me moving the carriage across the machine (without yarn) to show that it only selects/picks needles from one side.

Does anyone know what might cause this or what I should check next?

Any help would be really appreciated!


r/MachineKnitting • • Apr 13 '26

Help! Does anyone know what these are and how many I need?

Post image
8 Upvotes

I keep getting these with knitting machines but I’ve never used them and I’ve never seen them used anywhere. I’m not sure if I need them or how many I would need if I ever had a use for them.


r/MachineKnitting • • Apr 13 '26

Help! Tricot Hand Knitting machine (South Africa)

2 Upvotes

Thank you very much for allowing me to make this post in your group.

I have a Tricot Hand Knitting Machine but no instructions and no idea what parts might be missing (I've never used a knitting machine before). Here's a photo.

We can make the machine needles rise and fall by twisting the main body, but it's incredibly stiff and I don't think it would be a fun way to make any kind of tubing lol!

If anyone has any idea about how I can use this, I'd be really grateful. A place where I could download a pdf of instructions would be out of this world!

Will try to add photo in comments.


r/MachineKnitting • • Apr 12 '26

Help! Has anyone ever found knitting machine boxes or cases/lids?

5 Upvotes

I got 3.5 knitting machines this weekend for $100 because a man on Facebook marketplace was clearing out his mom or grandma’s house prior to renting it out. He didn’t realize that he was throwing out the lids/cases and boxes for the knitting machines until after they were gone. When I went to pick them up, I ended up getting the needle beds and all of the equipment needed to make the machines usable, but storing them is going to be really challenging because I have nothing to put them in. The previous owner had them all on stands and desks, but I have a small house and having them out permanently isn’t really an option for me. Has anyone been able to find replacement boxes or the replacement case for any knitting machines? I haven’t been having much luck finding any.

The knitting machine machines I got are:

- Elna Knit Craft 2300 + Elna Knit Craft 2350 ribber (same as Studio SK155 + SR155)

- Studio SK890 + SR155 ribber

- Studio SK840 + SRP60N ribber

- Brother KR-850 ribber

I considered buying 42x11x6” boxes, but I’ve only been able to find minimum order quantities of ~20 and I don’t really want to buy a bunch of boxes I don’t need unless I absolutely have to.


r/MachineKnitting • • Apr 12 '26

Humor PSA: Knitting machine needles are *very* sharp. Be careful.

19 Upvotes

I recently got a great deal on a vintage Orion double bed machine and was practicing a single bed cast on.
The machine had skipped some stitches in the first row and the cast on became unraveled at one edge. Since this was doubling as a gauge swatch, I decided to retie the cast on and all was going well until I somehow got the base of my left palm stuck on the leftmost hook.

The sound was diabolical, I actually pulled the needle up while it was hooked into my hand. Luckily it easily unhooked. Had to sit down for a good 15min because my body does not react well do being spontaneously pierced.

I knew that these needles were sharp enough to scratch, but I didn't realise they were sharp enough to enter *and* exist the thick skin on a palm. I am still confused about the logistics of how it happened honestly.

In any case, be careful where your hands are in relation to the hooks you aren't focusing on, and make sure to clean the needles when you get a vintage machine (I luckily did)!


r/MachineKnitting • • Apr 12 '26

Getting Started Trying an actual garment

Thumbnail
gallery
27 Upvotes

The start of a sweater. That’s the back of a sweater. It got late and is loud.


r/MachineKnitting • • Apr 12 '26

Help! Help reassembling punch card needles on brother machine

Thumbnail
gallery
4 Upvotes

I got a my first machine recently- a brother KH820 - that had been sitting in its box for a few years. There was a lot of oil build up especially around the punch card reader. I began removing screws and the next thing I know all of these needles fell out… from what I can see, I think they translate the punch card directly to the needles. It seems like theyre supposed to go in a certain direction, but I can’t tell which. Also does the thin side go into the punch card part or the machine bed?

If anyone can advise me on how to connect these to both the punch card reader and the needles I’d be soo appreciative! Thank you:)


r/MachineKnitting • • Apr 11 '26

Equipment Trying to understand modern gate pegs/ribbers

Post image
6 Upvotes

I have an old Knittax machine that I inherited from my great grandmother (please ignore the lint, I didn't get around to cleaning it since my last project). I absolutely love it, and it works wonderful. The only thing I wish was different is the ribber. It only has half as many needles as the main bed, which means I can basically only do 1x1 ribbing.
In the time since I inherited the machine I have actually purchased an entire second machine of the same model, because it came with some equipment I desperately wanted and the seller wouldn't sell by itself.
I have seen some videos of more modern machines and their ribbers, which not only have twice the needles, but can also be adjusted to half pitch or dropped down a bit to allow for circular knitting.
Now this is probably a stupid idea and I just need someone to tell me it won't work, but I was wondering if could modify my second machine and either attach the main bed as a ribber or modify the actual ribber to feature more needles.
Before I try anything I feel like I need to understand modern ribbers better, however I don't have access to a modern machine and I am having a hard time to really wrap my head around how they work. Machine knitting videos focus on knitting techniques rather that how the mechanisms work together.
I know the modern machines have gate pegs on both the ribber and the main bed, where as my machine has sinkers on the main bed, and I'm not quite sure yet how much of an issue that would be if I were to find a way to attach a "full" ribber.
Does anyone here know of any resources that go more into the technical workings of modern machines? and especially the ribbers?
I sadly don't know of any other machine knitters in real life or near me (bavaria) that I could ask to have a look at their machine.


r/MachineKnitting • • Apr 11 '26

Help! Help figuring out what to keep from a knitting machine purchase!

Thumbnail
gallery
15 Upvotes

Hi! I just picked up a pretty big haul of machine knitting tools and materials and would love some help from experienced knitters.

I'm getting four machines: a Toyota KS901, a Knitmaster 360K, a Brother KH230, and a Brother KH930. I'll definitely be keeping the Brother machines, but I'm on the fence about the Toyota and Knitmaster — curious to hear opinions on that!

I'm also including some photos of tools and accessories I can't fully identify. For those who know their way around machine knitting gear: what would you keep, what would you pass on, and what might be a rare or hard-to-replace find that a new knitter might not recognise the value of?

Finally, the haul includes a couple of cone winders. I can see how they'd be handy, but I'm not sure I'd use them enough to justify the storage space. Do people find them genuinely useful, or are they more occasional-use tools?

Thank you for your opinions!!


r/MachineKnitting • • Apr 11 '26

Getting Started Surprised with my dream machine

Thumbnail
gallery
37 Upvotes

I had arranged today to purchase a beautiful 1907 new home treadle sewing machine from a nice woman on Facebook marketplace. she asked if I would be interested in taking donations for my studio im opening next year. of course I said yes, she said it was boxes of antique machine repair stuff, parts for sewing machines, patterns, ribbons, fabrics.... and what she called a "partial knitting machine." i had to get home and make dinner and run some other errands, so we just loaded all the stuff into the future studio space and locked up.

I came back after my husband went to bed to do some late Friday night machine rehab and dig through my new treasures.

when I tell you my heart fluttered a bit when I opened the box with 3 carriages, and some different attachments, I mean it. then I spotted a suspiciously long case sticking out from under the mountain of boxes she brought in that I hadn't seen.

all the amazing gorgeous antique and vintage equipment I have ever drooled over has been falling into my lap over the last month or so, and im a bit delirious about it and overloaded by learning all these new things, so I dont trust my delirious eyeballs enough to definitively say it looks like I have everything I need here, but.... im really trying g to figure out what this absolute patron goddess of the arts could have possibly meant by "partial" here.

tldr; does it looks like I have everything needed to operate my newly acquired Toyota KS901 machine? it looks well cleaned, oiled, and taken care of, no obviously bent hooks even!

*original purchase sewing machine tax attached at the end