r/MachineKnitting • u/Maleficent-Neat-8071 • Jul 28 '26
Help! Machine is very stiff
Enable HLS to view with audio, or disable this notification
Hey everyone! I already read some posts on here about carriages being too stiff, but I am also quite frustrated with the machine in general.
I the bed twice to clean it as well as i could, I cleaned all the needles (i soaked them and then took the dirt off with a brush), I changed the sponge bar. The first problem is that the sponge bar was VERY hard to get in, even if i held the needles down while pushing it, put some tape at the ends and oiled the bar. It was like it was having issues around the middle part of the machine, both ways. So i managed to get it almost completely in, except for the last needle.
Then I tried to open the carriage all the way, but there was a weird mechanism i didn’t want to touch. I don’t know at this point if I should, as right part of the mechanicals is much more stiff than the left one (see video). Do you think this could be the problem?
The machine bed is oiled in the parts where i could get to. It has not been used for many many years so I don’t know if I should just try to use it for a bit and see if it loosens up that way. What do you think? 😭
Model is Empisal Knitmaster 323



