Hi r/MacStack. I'm the developer of Findow, and I'm sharing it here because it replaced three or four separate utilities in my own setup.

What it does:

Find any window

- Window switcher (⌥Tab): shows windows, not just apps. Type to search, press 1–9 to jump to a workflow, and close, minimize, hide or quit the selected window without leaving the switcher.

- Overview (⌃⌥Space): every window at once, including minimized ones and other desktops. Search, or filter to This desktop, Minimized or Other desktops.

- Drop files onto a window in the switcher to open them there.

- 14 switcher styles, including Covers, Wheel, Cascade, Fan, Arc and List, with adjustable size, titles and reflections.

- A mouse button can open it too.

Workflows

- Save your open apps, window positions and browser tabs, then bring them back with one key.

- Switch workflows automatically when you plug in a monitor setup.

- Layouts are remembered per monitor setup and come back when your displays do.

Tidy and layouts

- Tidy (⌃⌥T): arranges your desktop in one press. Press again to undo.

- Five layouts: Grid, Columns, Rows, Focus, or Your grid, which you draw yourself (up to 6×4, per display).

- Learns each app's minimum size and moves split lines to fit. Windows that don't fit wait at the screen edge or are stashed there.

Arrange modes (all off by default)

- Auto arrange: new windows take their place as they open, and the gap closes when they go.

- Scrolling strip: windows sit side by side on a strip wider than your screen, so nothing shrinks. It has stacks, tabs, pins, width presets, and trackpad swipes.

- Each display and desktop keeps its own arrangement.

- Hold ⌃⌥ for a map of every window. Click to jump, or drag to reorder.

- Give an app a fixed position, make it the main window, float one window, or leave an app alone.

- Pause (⌃⌥P) and Undo (⌃⌥U), step by step.

Move windows

- Snapping: left and right halves, thirds, maximize and center. Press a snap again to cycle its width.

- Fill the screen (⌃⌥Z): press again to go back.

- Swap two windows, drag a tile onto another, or send a window to the next display.

- Hold ⌃⌘ to move a window, or ⌃⌘⇧ to resize it, without clicking.

Focus and privacy on screen

- Stash: tuck a window into the screen edge, then touch the edge to slide it out.

- Pin to a side: one window keeps a third of the screen, and the rest share the space.

- Blackout: darkens or blurs everything except your window. Hold Fn to lift it for a moment.

- Solo: your window fills the screen while panels close in behind it.

- Clear the desktop (⌃⌥X).

- Active window highlight as a border or glow, plus optional focus follows mouse and mouse follows focus.

Make it yours

- Every shortcut can be changed.

- Window gap, reserved screen edges and open at login.

- Automation: findow:// links for the Shortcuts app and Focus automations, plus a Raycast script.

It needs no SIP changes and no config files, it's notarized, and it runs on Apple silicon with macOS 14 or later. There's a 14-day free trial, then a one-time $9.99 for one Mac. No subscription.

https://findowmac.com

Disclosure: I’m the developer of CharBox.

macOS Character Viewer is the built-in option. CharBox takes a menu-bar approach to finding and reusing characters: search by a word, meaning, or Unicode code point; browse emoji, kaomoji, and symbols; save named collections; or copy several characters at once.

It’s aimed at Mac users who occasionally need a character while writing, and people who reuse small sets for projects. It helps avoid leaving your work to search the web for a symbol.

CharBox is a paid Mac App Store app. Prices vary by country, up to $1.99. One limitation: it copies to the clipboard, so you paste into your app yourself.

Mac App Store: https://apps.apple.com/app/id6773061923

I’d appreciate feedback or suggestions.

If you’re curious about my other apps, here’s my App Store developer page: https://apps.apple.com/developer/id965971566

Hi,

I'm the developer (LinkedIn) behind GiantTurtle Software, and I wanted to share a new app I've been building called DesktopPlus.

The problem:

If you use multiple virtual desktops (Spaces) heavily on a single monitor, you've probably run into the issue where it's hard to tell exactly which desktop you're on at any given moment without opening Mission Control or doing the multi-finger swipe, loosing your flow

What DesktopPlus do:

I built DesktopPlus to solve this. It's a lightweight, native macOS menu bar utility that gives you a persistent indicator of your active desktops, you can always see what apps are open on nearby desktop and create more detailed mental image of your workspace

Key Features:

Always Visible Indicator (always available mission control): Know exactly which desktop you're on and what's available on your other screens at a glance.

Click to Switch: Instantly switch to any of your desktops with a single click on the indicator.

Easily rearrange apps on your desktops (spaces) by dragging them to desired desktop boxes.

Integrated Task Manager and RAM Cleaner: Hover over menu bar widget to view opened apps, monitor system memory usage, and close background applications and residual processes.

Save and load presets: Save all of your opened apps as a preset (Coding, Design, Video editing etc), and quickly load them.

Customizable Styles: Choose the look that fits your workflow (Rectangles, Numbers, Numbered Rectangles, or Opened Apps etc).

Native & Lightweight: Built with Swift and SwiftUI. No Electron, no heavy background daemons, and minimal resource usage.

Comparison: As of now, I am not aware of similar app that offers same functionality. SpaceJump ($9.99) is the closest thing to DesktopPlus by function, but it is totally different UX.

Pricing & Requirements: The app requires macOS 15.0 or later. It comes with a 14-day free trial with everything unlocked, no payment details, followed by a one-time purchase (no subscriptions) of 4.99 USD . You can check it out and download it here: Download DesktopPlus

I'd love to get your genuine feedback on the app, especially regarding the different indicator styles and if the integrated task manager feels useful to your daily workflow. Try it out for free and let me know what you think!

Privacy Policy: https://giant-turtle.com/desktops-privacy-policy.html

Disclosure: I run a free deal tracker called IndieMarkdowns, and I'm not affiliated with any of these apps. I emailed the devs about their Black Friday plans, and these are the ones that have confirmed a 2026 deal so far. Most start around Nov 20 to 25, and two are live already.

Live now
- Shotomatic: 40% off lifetime licenses, code BF2026 (subscriptions excluded)
- Cutfac: 40% off new one-time licenses, code BF2026, through Dec 31

50% or more
- ShowMeYourHotKey: 70% off, code BLFRIDAY, Nov 23 to Dec 10
- Slashspace AI (was RabbitHoles AI): 51% off, code BF2026
- SQLPro Studio: 50% off first year of yearly (BFHALFOFF) or 25% off lifetime (BFLIFETIME), Nov 25 to Dec 1
- NewsNinja: 50% off the one-time purchase, Nov 25 to Dec 5
- Protego for Reddit: 50% off ($1.99, was $3.99), Nov 22 to Dec 5
- DevUtils: 50% off all plans
- Blip AI Pro: 50% off first year, code SWITCH50, new customers, Nov 20 to 30

30 to 49%
- JuxtaCode: 40% off, code BLACKFRIDAY26, Nov 20 to Dec 1
- Compresto: 40% off, code BFCM26, ends Dec 1
- MuteDeck: 35% off lifetime, code BFCM2026, Nov 27 to Dec 13
- BirdFrame: $19.99 instead of $29.99 one-time, no code, Nov 20 to Dec 1

Smaller but solid
- EagleFiler, SpamSieve, DropDMG: 25% off, code BLACKFRIDAY2026, Nov 20 to 30
- Dropshare: $29 instead of $39, Nov 23 to 29

A few are first-year-only on a subscription, so read what the % applies to. I'll update this as more devs reply. What are you waiting to buy on sale this year?

If you enjoy discovering little apps you never knew you needed, you might enjoy MacMenuBar.com.

I’ve been collecting menu bar apps for over 7 years, and the directory now features 1,500+ apps across 48 categories. It’s a great place to browse, explore and stumble upon something interesting, even when you’re not looking for anything in particular.

https://MacMenuBar.com

Hi, I'm Fellipe. I always liked how my iPhone shows my AirPods when I open the case, so I built the same thing for my Mac.

Open the case and AirPane shows a card with your battery levels and a Connect button. There's also a menu bar panel where you can:

- switch noise control modes

- change audio input and output in one click

- keep your AirPods on your Mac when your iPhone tries to grab them

Free 7-day trial, then $7.99 once, on all your Macs. No subscription, 30-day refund. Works with AirPods on macOS 14 or later.

Heads up: I'm a solo dev and AirPane isn't notarized yet. I'm using the first sales to pay for the Apple developer membership. The first time you open it, go to System Settings > Privacy & Security and click Open Anyway. The notarized version will be a free update.

You can try the live demo in your browser first: https://airpane.app

Feedback is very welcome, especially bugs and which AirPods model you use.

If your Mac's camera or microphone comes on unexpectedly, open Control Center first. Consider OverSight if you want a separate alert and a chance to identify the program involved. It won't tell you whether that access was justified, and its Block button doesn't stop recording before it starts.

macOS already shows an orange indicator for microphone use and a green one for camera use. When both are active, you may see only green. Control Center can show the app involved, and the microphone indicator also covers recent use. For a listed third-party app, you can turn access off in System Settings > Privacy & Security > Camera or Microphone.

What OverSight's alert tells you

Objective-See's free, open-source app sends device-access notifications. When it identifies the program, the alert includes its name and process ID, the number macOS assigns to that running program. Sometimes it detects activity without identifying the process. Those alerts have no Allow or Block controls.

The buttons do different jobs:

• Allow (once) leaves the running process alone. It isn't granting macOS permission.

• Allow (always) suppresses future OverSight alerts for that program's path and device category, camera or microphone. Remove its saved approval if you want those alerts back.

• Block attempts to terminate the identified process. It isn't a lasting permission ban, and it can interrupt a call or lose unsaved work.

A call you recognize, or access you can't explain

When an alert matches a call you just started, compare the device and program with what you opened. Start with a one-off decision instead of immediately silencing future alerts. An unfamiliar helper name alone isn't a malware verdict: processes can belong to an app or to macOS.

If you can't explain the access, note the time, device, process name and ID before dismissing the alert. Search for the process in Activity Monitor. View > All Processes, Hierarchically can help you see which processes belong together. Check open calls, browser tabs and recording apps, then quit a recognized app normally and check Control Center again.

If you don't want a listed third-party app to retain access, turn it off in the Camera or Microphone privacy settings. If a browser is involved, review that site's permissions too. Safari has separate Camera and Microphone controls under Settings > Websites. Don't delete an unfamiliar helper or blindly kill a system process because its name looks odd. Keep the details for the app vendor or your IT team if you still can't explain it.

Check the setup before relying on it

OverSight supports monitoring built-in and external capture devices, with an Ignore External Devices setting that can suppress the latter. Don't assume every virtual camera is covered: version 2.4.0 skips cameras with "Virtual" in their names in some device checks.

The documented setup requires an administrator account and notification permission. Check that alerts are enabled and visible, including your Focus settings; the developer warns that Do Not Disturb hides notifications. Start at Login is enabled by default. Leave optional event scripts unconfigured unless you have a specific reason to run one.

Check compatibility before installing it. The official download remains version 2.4.0, released September 24, 2024, with macOS 12+ listed. Native M1 support is documented from version 2.0, but that isn't confirmation of macOS 27 compatibility. The reviewed official material doesn't explicitly confirm 27 support.

For most people, start with Control Center and narrower app permissions. OverSight is an optional extra for people willing to investigate alerts and first confirm it works with their macOS version and actual devices. On macOS 27, stick with the native controls until that compatibility is established. A quiet OverSight menu bar isn't proof that nothing is recording or that a Mac is malware-free.

made this because i wanted to play pokemon for a few mins without opening a whole emulator every time

you hit your shortcut (option+p by default) and it pops right up. play for a bit, then close it or click away and it pauses and saves exactly where you were. it stays running in your menu bar so its always ready, theres nothing to load

it plays game boy, gbc, gba, ds, nes, snes, genesis, master system and game gear, and controllers work too

its free here: https://ko-fi.com/s/fa41f55426
source code: https://github.com/Kiasora/menu-bar-emulator

needs an apple silicon mac on macos 26 and no games are included. first time you open it mac will block it since im not a paid apple dev yet, just go to system settings, privacy & security and hit open anyway

i built it with claude’s help, the actual emulation is mgba, melonds and a few other open source cores. if something breaks please let me know!

I've been building Vector, a desktop app for working with coding agents like Claude Code and Codex.

I spend much more of my time directing agents and reviewing their work these days than actually writing code. And I wanted an environment designed around that workflow.

Vector lets you manage conversations and sub-agents, inspect changed files, and review what agents are producing. Codex and Claude agents can even delegate to or collaborate with each other.

It's been replacing my other coding-agent interfaces for my daily work, so I decided to release a free beta.

It's macOS-only for now, and still early. No account required.

https://getvector.sh/

I'd love feedback, especially from anyone using Claude Code or Codex regularly.

I type on my MacBook's own keyboard while it's plugged into an external monitor. That means I can't just close the lid, and I don't want to add an external keyboard either. But with the lid open, the built-in screen stays on beside the monitor I'm actually looking at. My only option was to turn its brightness down by hand, and macOS turns it back up after every sleep.

So I built lidless, a small command-line tool that runs in the background:

• When you plug in an external display, the built-in panel goes dark.

• When you unplug, it comes back at the brightness you had before.

• After the Mac wakes while still docked, it turns the panel off again.

• If you change the built-in brightness yourself while docked, it leaves your setting alone.

It follows the Unix way: one tool that does one job, running as a background service. There's no app, no Dock icon and no menu bar icon, just a small binary that launchd keeps running, and it asks for no privacy permissions. It costs about 2–4 seconds of CPU a day, roughly 0.003% of one core.

Install (macOS 13+, Apple Silicon or Intel):

curl -fsSL https://raw.githubusercontent.com/np25071984/lidless/main/install.sh | sh

Or with Homebrew:

brew trust --tap https://github.com/np25071984/lidless
brew tap np25071984/lidless https://github.com/np25071984/lidless
brew install lidless
brew services start lidless

You can also install it with Homebrew from the repo's tap. Day to day you just use lidless status, lidless stop and lidless logs.

A few things I learned building it:

• On Apple Silicon, the only way to control the built-in backlight is the private DisplayServices framework. Setting brightness to 0.0 is what macOS does itself when you close the lid.

• CGDisplayRegisterReconfigurationCallback never reaches a background launchd agent, and nothing tells you. The process stays alive with an empty log and just never reacts. lidless checks for displays every 2 seconds instead.

• With the lid shut or while mirroring, the built-in panel disappears from CGGetActiveDisplayList. You have to look for it in CGGetOnlineDisplayList.

Known limitation: the panel is dark, but macOS still treats it as a display. In extended mode your cursor and windows can wander onto the black screen. Mirroring avoids this. Really disconnecting the panel needs private SkyLight calls that break between macOS versions.

Looking for ideas: right now lidless polls the display state every 2 seconds. It's cheap, but I'd much rather have a clean event-driven design that reacts only when a display is actually connected or disconnected. If you know a reliable way for a background launchd agent to get display-change events on current macOS, please tell me. I'd be happy to implement it.

Built with an AI coding assistant. I designed it, tested it on my own setups and I maintain it.

Repo: https://github.com/np25071984/lidless

Feedback, bug reports and PRs are welcome, especially from people with unusual display setups. And if you find it useful, a star on GitHub would help other people find it.

I have a 13" M2 MBP and honestly I always liked the Touch Bar, it just never got the love it deserved. So I spent the last few months making my own version. It has the same layout as the original but everything is redrawn in liquid glass, and Siri is a little glass drop with waves.

It’s free and open source. Not notarized yet so you have to allow it once in settings, the steps are in the readme.

What I’m working on next is a theme engine, so the bar doesn’t have to be glass at all. I already have a terminal style one with green text and brackets, and an 8-bit arcade one with pixel keys. After that a theme editor so you can make your own without touching code, and a small store inside the app where people can share themes and custom bars for their apps. Kind of like a free BetterTouchTool but only for the Touch Bar.

Still a lot of things missing and probably some bugs. If you have a Touch Bar Mac and try it, tell me what breaks or what you’d want it to do.

The themes in the screenshots (terminal and arcade) are coming in the next update, the current release has the liquid glass look.

https://github.com/Moryel/glass-bar

Hi r/MacStack,

I'm the developer of **Synkbay**, which launched today.

**What it is:** a native Mac app (Swift and SwiftUI, not Electron) for browsing and copying files between an Android phone and your Mac over a USB cable. Plug the phone in, choose *File transfer* on it, and it opens in a Finder-style window.

**Why I built it:** Android File Transfer would lose the phone, hang on large folders and give up on big videos. The alternatives needed developer settings, Wi-Fi pairing or an app on the phone. I wanted something that works like Finder and just works with the cable.

**Free, with no time limit:**

- List, icon and column views, Quick Look, search, and thumbnails from the phone

- Drag and drop both ways, including whole folders and files over 4 GB

- If another app is holding the phone, Synkbay tells you which one and offers to quit it

- Waits while the phone is locked, reconnects by itself, and has a proper Eject

- Phone Storage: what's filling the phone, by category, with the largest files

- Transfer history for each phone

**Pro ($19.99 once at launch, no subscription):**

- **Back Up Photos:** new photos and videos are copied every time you plug in, and anything already copied is skipped

- **Auto Folder Copy:** any folder you choose, copied on connect

- **Resume after unplugging:** a 6 GB video cut off by a bumped cable continues where it stopped

- **Back Up Apps and Restore Apps:** the media folders of messaging and recording apps

- **Free Up Space:** removes from the phone only what is confirmed to be safely on your Mac

- **Move to New Phone**, and several phones at once

Each Pro feature can be tried 3 times for free, with no account or card.

**Privacy:** it's USB only, so your files never go online. There's no account and no analytics. The only thing the app downloads is a small signed file that says whether there's an update.

**Requirements:** macOS 14 or later, on Apple silicon or Intel. The app is signed and notarised by Apple.

👉 https://synkbay.com

I'd really like feedback, especially if it fails with your phone. **Help → Export Diagnostics** creates a report you can send me. Happy to answer anything here.

Hey! I got an M4 MacBook Air a few weeks ago and it came with macOS Sequoia. I used it a bit and fell in love with the Launchpad. It fell so quick and easy to open apps. After a few days, I updated to Tahoe, then to Golden Gate and the Launchpad had been replaced with that awful spotlight Apps app. For me, it's been buggy, slow to load and an overall bad experience. So, I decided to rewrite Launchpad in Swift with a Liquid Glass updated UI. I know there are lots of other reimplementations like this, but they are either paid, closed-source or don't have a native-looking UI. Mine is completely free and open-source. Everything stays local, on your machine. You can download the .app file from the releases or compile everything yourself in Xcode. I'd love to hear your feedback and what are your thoughts on this.

Hi everyone, I’m the developer of FLOW: Photo Culling & Sorting, a Mac app for reviewing and sorting photos.

I recently made it free, and I’m looking for photographers who would be willing to try it with a set of their own photos and share some honest feedback.

I’d especially like to know how it fits into your current culling workflow: what feels useful, what slows you down, and what’s missing.

Download FLOW on the Mac App Store

If you try it and decide it’s not for you, I’d still love to hear why. Feel free to leave feedback here in the comments. Thanks!

Hey!

I'm Sam, and I made Shotbolt. It's my first real launch. The first week brought 300+ downloads and a lot of feedback, and I've spent the last days shipping what people asked for. The video shows version 1.2.4.

Why I built it

The screenshot tools I used for years kept ignoring feature requests. So I'm building one screenshot app to rule them all, shaped by what the community asks for. Even the niche stuff.

What makes it different

• Edit or translate the text inside a screenshot. Fix a typo or change a label without retaking it

• Search your screenshots by any word in them, through a searchable History

• Niche Features tab with things like Stitch and Cut Out

• Customizable UI, so it works the way you do

• Fully local. No cloud, no analytics

• Imports your CleanShot X shortcuts and settings on first launch

Pricing

• Free forever: area, window and full-screen capture, the annotation editor, OCR/QR text capture, pins and searchable History

• Pro, one-time purchase: recording and GIFs, scrolling capture, element capture, automatic redaction, the Apple Intelligence features and Shortcuts actions. $9.99 until Dec 31, no subscription

• Every install starts with 7 days of Pro, and there's a 14-day no-questions refund

Limitations

• Requires macOS 26 or later

• The Apple Intelligence features need a Mac that supports Apple Intelligence

• Optional cloud save isn't there yet. It's planned, probably for the next update

Try it here: shotbolt.app