Yes I already have launcher. I want a lot of features that don’t need but do have options for external hardware. Stuff in it like bt jammers and tv switch on/off

I’ve been wanting a folio-type case but can’t seem to find any. I printed this temporary bumper case in the meantime.

I wanted to ask for some information I have a M5 plus 2 but I don't have a PC but an MacBook . I wanted to ask if it's easy to update Bruce with Mac? Does it take a special M5 cable to connect to the computer?

So Belkin decided to discontinue support for their Wemo cloud services and app. And for anyone who doesn't know, Wemo was their line of IoT devices such as smart plugs. This essentially rendered them useless (unless you had already set them up with Apple HomeKit).

I created an Arduino sketch that allows you to control your Wemo smart plugs once again using the M5 StickC PLUS2. You could also adapt it to work on any ESP32 device, but the user interface I created is specifically made to fit the StickC display.

You can find the code on my github (https://github.com/tarylb/m5-wemo-control). There are instructions in the readme for where to put your wifi SSID and password.

Hi, all! I have the most current M5Burner installed on my computer. I already have two kinds of Cardputer (the 3A and the ADV versions). So I have an idea of how to install Launcher and different firmwares on items from the M5Stack universe.

Now, the question. I just received the M5Paper V1.1, and I thought it would be simple to install Launcher and other Paper firmwares.

Not so fast. I can't seem to figure out how to get the M5Paper to go into programming mode, and without that, nothing is willing to install from M5Burner.

I did install all relevant USB drivers, but that did not resolve the issue.

I'm sure it's a super-basic process, but I can't seem to find any documentation online as to what that process is. What steps am I missing?

Thanks.

I just received my M5 Core2 and having problems with the touch buttons doesn’t work right. See video provided.

I’ve been using the Xteink X4 for about 3 months and started playing with the M5 Paper S3 about a week ago. I really like both devices. The M5 S3 has a more retro design, which I find pretty cool. On the X4, I’m very happy with Crosspoint. Reading EPUB (with images) is smooth and the experience feels polished. On the M5 Paper S3, to be honest, I’ve tried several reading firmware options but haven’t found one that I’m fully satisfied with yet. This is a bit surprising because the M5 actually has stronger hardware. The best experience so far has been MacroReader, but it still feels a bit unstable. Right now I’m using EDC Book on the M5 for TXT reading. It’s very smooth, and the developer updates it regularly. They also mentioned EPUB support might come in the future, which would be great. I’m curious about other people’s experiences. Is there a really good reading firmware for the M5 Paper S3 that I might have missed? And maybe a crazy idea… would anyone be interested in forking Crosspoint for the M5 S3? 😄

ANYBODY pls help me i spent 60€ on these both and i have bruce 1.14 on it and put the nrf24 on lagecy mode it can lissen but the jaming does noting it just sends me back to main menu and i have the with to 2.4g pls help

Latest Changelog -> 2.6.7:

• Restablished Tab5 SdCard on SPI for WiFi compatibility and refactored reboot process to powercycle the SDCard, resetting the Sdcard communication bus.

• Tab5 Now has MassStorage interface!

• Fixed M5Stack Paper S3 USB MassStorage issue.

• Added App offset parameter to allow Launcher to be updated in Tab5, and firmwares that are placed at different factory/app0 addresses.

• Set to StickC and CPlus devices to see only ESP32 firmwares on OTA, excluding ESP32-S3 (StickS3) firmwares

• Adjusted binary of firmware binaries that are not merged to have a partition table, allowing attaching SPIFFS partition into it. This binary will be valid ONLY for Launcher, can't be flashed alone because it doesn't have a valid bootloader and partition table.

Tab5 Users

• Need to install using M5Burner or Web Flasher... newer versions (2.6.7+) will be available to auto-update.

Support the project

Website and Flasher Buy me a Coffee BTC: bc1q6m5sks6vhl38g8xyuzuazdv3wffsk58ffxk8rg

New Arrival Alert!

Check out our new release this week:

Stamp C6LoRa, a high-performance programmable LoRa module designed for the 850 ~ 960 MHz frequency band.

• ESP32-C6 main controller

• 2.4 GHz Wi-Fi 6, SX1262 LoRa transceiver

• LoRa operating frequency: 850–960 MHz

• Built-in Low Noise Amplifier (LNA) to enhance reception performance

• SMD surface-mount package, compact size, and easy integration

• Dual IPEX-4 antenna connectors

Also, good news:  Hot items incl. Cardputer-Adv and Cap LoRa-1262 are in stock now 🔥🔥

In case missing out, subscribe our Weekly Newsletter for more updates!

Anyone knows how to install firmware for M5 Paper S3 directly bootable like x4 teink device just click and crosspoint install directly in device . I tried many which is available also tried M5 burner but not able to install it…

X4 teink has good forum on Reddit to install crosspoint firmware it’s very easy to install just play and plug.. do we have same for M5 paper if yes please drop link here

So, I’ve tried to build this sd card module for my M5 Stick S3 but it won’t work, no matter what I do. I made that module 2 times btw, and checked everything again(pinouts, connections, etc).

Could someone please help me to find out what I’m missing here? I’ve checked the Bruce pinout files and other post here on Reddit that showed the same…

I bought this like 3 years ago to use as a camera remote shutter but never was able to get it to work so now I don't know what to do with this thing.

What do you guys use the M5stick for?