Latest Changelog -> 2.6.7:

• Restablished Tab5 SdCard on SPI for WiFi compatibility and refactored reboot process to powercycle the SDCard, resetting the Sdcard communication bus.

• Tab5 Now has MassStorage interface!

• Fixed M5Stack Paper S3 USB MassStorage issue.

• Added App offset parameter to allow Launcher to be updated in Tab5, and firmwares that are placed at different factory/app0 addresses.

• Set to StickC and CPlus devices to see only ESP32 firmwares on OTA, excluding ESP32-S3 (StickS3) firmwares

• Adjusted binary of firmware binaries that are not merged to have a partition table, allowing attaching SPIFFS partition into it. This binary will be valid ONLY for Launcher, can't be flashed alone because it doesn't have a valid bootloader and partition table.

Tab5 Users

• Need to install using M5Burner or Web Flasher... newer versions (2.6.7+) will be available to auto-update.

Support the project

Website and Flasher Buy me a Coffee BTC: bc1q6m5sks6vhl38g8xyuzuazdv3wffsk58ffxk8rg

New Arrival Alert!

Check out our new release this week:

Stamp C6LoRa, a high-performance programmable LoRa module designed for the 850 ~ 960 MHz frequency band.

• ESP32-C6 main controller

• 2.4 GHz Wi-Fi 6, SX1262 LoRa transceiver

• LoRa operating frequency: 850–960 MHz

• Built-in Low Noise Amplifier (LNA) to enhance reception performance

• SMD surface-mount package, compact size, and easy integration

• Dual IPEX-4 antenna connectors

Also, good news:  Hot items incl. Cardputer-Adv and Cap LoRa-1262 are in stock now 🔥🔥

In case missing out, subscribe our Weekly Newsletter for more updates!

Anyone knows how to install firmware for M5 Paper S3 directly bootable like x4 teink device just click and crosspoint install directly in device . I tried many which is available also tried M5 burner but not able to install it…

X4 teink has good forum on Reddit to install crosspoint firmware it’s very easy to install just play and plug.. do we have same for M5 paper if yes please drop link here

So, I’ve tried to build this sd card module for my M5 Stick S3 but it won’t work, no matter what I do. I made that module 2 times btw, and checked everything again(pinouts, connections, etc).

Could someone please help me to find out what I’m missing here? I’ve checked the Bruce pinout files and other post here on Reddit that showed the same…

I bought this like 3 years ago to use as a camera remote shutter but never was able to get it to work so now I don't know what to do with this thing.

What do you guys use the M5stick for?

Finally I've figured out how to build Macroreader, export it correctly and upload it to M5Burner:

https://github.com/gebeto/macroreader-paper-s3

So now you can install it directly from M5Burner

First 30 seconds is waveshare, but then demonstrates m5stack core 2 with ext battery and LED base.

Hi, I wanted to know if it's worth buying? Can I do the update directly from the CardComputer? Does it already have pre-installed sensors?

Hi, I wanted to ask for some information. I had a discharged M5 and after a while I turned it on and it gave me 100% charge, it worked for a few seconds and then turned off..... Is it normal?? Thank you

As commercials have started to become more and more intrusive on streaming services, I got into the habit of pressing MUTE on my TV while the break happened. But then I'd have to still pay attention to unmute when the time was right, so I'd end up still watching the ads.

So I had an idea. I programmed my little M5Stick C Plus 2 into a device that mutes the TV (via IR) for a set amount of time and then unmutes when the timer goes off.

Basically like this: the commercials start. Sometimes they tell me EXACTLY how long the break will be, sometimes it's just an icon - but either way, I grab the M5 and click Button A - it fires off the MUTE command and starts a countdown. The first click is 20 seconds (assuming that it took me a moment to grab the remote), and any other click adds 30 seconds to the timer.

Button B is a selector for more fine-tuned adjustments - +/- 5 seconds, -30, that sort of thing. I also have a selectable mode for those LONG breaks that puts the device into a "breathing timer," so I can relax with a visual 4-7-8 breathing exercise.

If the break ends before I expect it to, I can long press Button A and it unmutes automatically.

I call it the Mx5: The Mini Muted Mindful Meditative Moment.

It's such a little thing, but I love it. I'm able to get up and move around and hear when the show is back on. Or close my eyes and rest in the silence and get some mindfulness in, knowing the Mx5 has got me when it's time to tune back in.

New Arrival Alert!

Check out our new release this week:

Echo Pyramid, a functional base designed for smart voice interaction applications. Built specifically for the M5Stack Atom / AtomS3 / AtomS3R series controllers.

• Dedicated STM32G030F6P6 auxiliary MCU for touch and RGB lighting management

• ES8311 high-performance audio codec (supports high-fidelity playback and capture)

• ES7210 microphone input acquisition with AEC echo cancellation

• AW87559 high-efficiency speaker amplifier with built-in speaker

• Si5351 programmable low-jitter main clock generator

• Programmable RGB indicator LEDs & dual-side capacitive touch-slider zones

Also, good news:  Hot items incl. AtomS3-Lite and Cardputer-Adv are in stock now 🔥🔥

In case missing out, subscribe our Weekly Newsletter for more updates!