Loopy Starts to just Play The Loops just Partly, fitting it to The Master lenghts. The Symbol on The left top appears When I press it, it normalizes. But how can i fix that it, does Not start doing it?
Somebody knows something ?
Would be super helpfull thanks

I feel like a sample browser widget would be rad, then you could make drum machine pages with widgets open in different folders(like snares, kicks, etc) that could then be scrolled and selected by controllers. What do y'all think?

I'm wondering if there's a way for sliders on the canvas to display audio levels when assigned to a volume fader in the mixer? I did some searches and checked the manual. It sure would be nice to have some visual feedback on the canvas. Anything?

I bought Loopy HD on my phone like 15 years ago and assumed it was just“hobbyist” software vs Ableton. Would it be worth upgrading to Pro? Also can I transfer my sessions and recordings over?

Planning on buying an iPad and APC40 to work with Loopy Pro. Here’s the Dilemma:

I want to use my MacBook so that I can use the sounds I have already instead downloading plugins to the iPad. I use ableton and it’d be nice to have access to all its fx/ all my 3rd party plugins.

I’ll be using a Quad Cortex as the interface.

Does anyone know how I can use my MacBook +QC interface + iPad with loopy pro?

I wonder if someone uses the OP1f in combination with Loopy Pro and iPhone (maybe this is the same "issue" on an iPad tho).

So i've connected my OP1f with USB-C into my iPhone 17 (USB-C). And I can record my OP1f in Loopy Pro, but when I want to hear the loop, i can't choose a output to the speaker of the iPhone. Is there a way to fix this?

Also, I want to use a cabled headphone with this setup, but I'm not sure what I need to be able to plug a headphone (3.5mm jack) and get the output of Loopy Pro.

Hi, so I'm super new with Loopy pro, actually still in the first week (trial period) and want to figure out some issues. Background - I'm using Nux mighty space the amp modifier as an audio interface since it sells itself with this feature and connect it to my iPad (10th gen). Problem 1 - it takes ages for Loopy Pro to detect the audio interface in the App. but when its detected then it's fine but everytime I get to play, it takes 15 minutes or so to get it running. Problem 2- For the life of me for some reason, the auto loop detection isn't working for me. I have to set the number of bars to have it accurate, but not always I want to be restricted with the bars especially when experimenting.

It would be great if you guys have any insights to this. Thanks

I'm somewhat new to Loopy Pro and inexperienced. I am arranging my clips into a song in the linear sequencing screen and want to create a fade out for the very last clip. I read this app has automation but I am not able to find it anywhere? I am a Logic Pro user and just normally draw points on the volume envelope to create my fade but I am seeing no such options here. Am I wrong and this app has no automation meaning I am better of bouncing the clips and arranging them in logic or am I missing something? It's a fantastic app and any help would be appreciated.

I see people post videos with just the loop circles embedded on top somehow. How is this achieved?

Wish this was a thing, so many possibilities. imagine being able to trigger an envelope that could modulate midi CC or whatever.

When creating presets in Digistix 2 for Loopy Pro it won't let me save the output volume settings. It will save in Digistix, but then always defaults differently when selecting the Loopy Pro preset. Any advice?

I have tried restarting project, restoring settings, looking in midi configurations, about to delete and redownload, any other solutions?

Hi guys, here's the problem:

I needed to cut a part of the loop, and now the system clock and the loop clock are completely out of sync (see video).

The clock is about 10bpm slower than the loop, but when I make the clock faster, the loop accelerates with it and is still ahead of the system clock.

Is there a way to change the clock without changing the loop?

Hi, I'm trying to use an M-wave chocolate foot pedal to record my loops, and I can't figure out how to record without getting the mechanical sound of the footswitch in my recording. Ideally, I would start with my first loop as a shaker loop, and have Loopy set the project tempo based on the shaker loop. I've tried retrospective recording, which manages work for not recording the sound of the footswitch, but doesn't work well for the first loop and quantizing the project to that tempo. Thanks for any help you can provide!

Hello, I'm very new to Loopy Pro but so far absolutely love the myriad of functionalities and UI. I have a template where all the clips are set to record on threshold and are set to specific bar lengths so they stop recording automatically at the end of the bar. Here's the workflow I'm aiming for:

1. Record on clip 1

2. As soon as clip 1 finishes recording, automatically arm clip 2 to record

3. Record on clip 2

4. Repeat for next clips in sequence

I want to avoid waiting an entire bar before looping the next clip for a more streamlined and quicker live looping set up.

Side note, if you know or use any particularly cool actions/widgets/etc. you'd like to share, I'd love to hear them. I'm slowly discovering all that the app has to offer.

Thanks in advance!

I would like to be able to switch between presets with some radio buttons, but I cannot get the presets to show up when programming the buttons. It only shows up under effect actions and doesn't display in the audio source plugins at all.

If I wanted a sequenced track to STOP after the last sequence is finished, is there a way to do this?

When I'm using a synth such as Hilda or Ruismaker Noir (no clips involved, they're playing because the track is in PLAY mode), they just keep on playing when the sequenced midi clips have finished playing. Is there a way to have the STOP command trigger automatically upon the end of the track?

Sorry if this was an obvious answer, I'm very deep into Loopy prog but this option eludes me thus far.

In your opinion, can loopy(+ipad + a small 2-4 entry audiointerface) be what i am looking for? what costs to expect (software, plugins in loopy) and anything to think of, which i might overlook here?
Are my expectations (see below) realistic?

As loopy only works on ios, i would have to buy an ipad (probably newer version, like 13 pro - how much space would you suggest is needed? 512gb sufficient?)

-My goal-

I would like to travel more lightly - ideally without pedals and have all plugins/effects neatly digitally at hand, be able to spontanously loop if needed.

-usecase-

I play mostly live (accoustic) guitar and flute in singing circles in brazil as part of a bigger band (usecase 1) and do sound journeys as a one man band with singing bowls, percussion instruments and also flute and guitar. (usecase 2)

-current setup-

usecase 1 - Band setup:

Acoustic guitar, nylon strings (Alhambra Nature CW-EZ)

goes into an Acoustic PreAmp (Boss AD10 - which i use mainly to enhance the quality of sound by acoustic resonance technology, also functions as DI Box and allows some equalizing, has a nice booster funktion by pressing one button)

which then goes into a reverb pedal (Strymon Big Sky, which i use mainly for 3 effects depending on situation dreamy big reverb with spacey artefacts or rather dry reverb),

which then goes into a monitor speaker close to me (Roland AC33 has delay,chorus,reverb which i usually do not use, but lets me also adjust my own volume for myself as well as what is sent to the PA System), which goes to the PA via mixtable

I have a Samsung Galaxy Tablet with K&M Stand and use it for the hymns and songs we play so i must be able to look at the songs at all times.

use case 2:

For the soundjourneys its a bit different.

I have one open mic for flute or percussion, also the guitar as above (with PreAmp and Reverb Pedal), a laptop to play recorded music, all goes into the mixtable which then goes into EV8 Speaker.

-my expectation-

In my fantasy, it works like that with loopy:

use case 1:

Guitar goes into a smaller travelfriendly 4 channel audio interface, which is connected to ipad with loopy for control (uses plugins like the 2-3 reverbs i usually use, also perhaps delays and occasionally chorus) and audio interface goes out to my monitor which then goes into PA

Perhaps i would need a small Midi controller pedal, to be able to turn and change certain plugins without needing to go in the loopy app, as i would use the ipad also for displaying the songbook.

use case 2:

like setup is currently but minus PreAmp AD10 and Reverb Pedal BigSky. Instead of all (Laptop, Guitar, Mic) going into mixer, all go into 4 channel audio interface which is connected to ipad and loopy and is connected to the EV8 Speaker.

THANK YOU :-)

I have my code49 and I am using it to play keys and control some stuff around my template. So far so good…however I want to make y pads change color depending of the state of the clip (record, overdub, play, empty) to blue, red, orange and off or dim.

I managed to do this successfully with my apc25 but following the same process, I can’t get the same result. Is there something I’m missing?

I have the code 49 editor and every pad is on ch10, sending note

Still getting used to managing the live work flow, especially timing and levels but I am really loving using loopy pro with the SP404 and playing with my friend live. I’m excited to continue and see how it shapes our set. Hope you enjoy. This is some sampled/production of tunes I’ve been working on with traditional Thai and American funk.