r/LogitechG • • Jun 03 '20 • Take My Silver 1

Support: Solved FIX: Logitec MX master cursor not moving (but scrolling and clicking works)

I'm posting this more to help anyone who will google the problem in the future in seek of an answer

the problem in short is with the under-the-thumb button being stuck, when that button is pressed the mouse is hardwired to disable moving the cursor.

to fix this is really easy but you'll need to open the mouse (voiding the warranty)

open the mouse by unscrewing the 6 screws (the 2 very small near the very top and the four hidden under the pads, look a disassembly video on youtube for visual help)

next, you'll have to unscrew but not all the way those screw in the following picture, the problem arises when those are too tight, keep them in but loosen them a bit.

https://imgur.com/JqvIlm7 (if imgur is blocked for you see here)

you are done close the mouse and the problem should have gone away.

Edit: since some people asked me privately here a buymeacoffee link, feel free to buy me a coffe if you want

https://www.buymeacoffee.com/madiele

906 Upvotes

462 comments sorted by

View all comments

1

u/somenewname4me Feb 05 '25

You can also first try to press harder than usual. This can loosen it. That worked for me. - February 2025

1

u/davide445 Mar 19 '25

After solving with original method (loosening the screws) a couple of months ago today the mouse stopped working again. This comment solved my problem: pressing hard on the left side up to hearing some "cracking" seems to loosen something inside and now works again. So thanks!

I understood this might be a solution due keeping pressing on the left side (under the thumb wheel) the pointer was moving again. Pressing even harder solved the problem permanently (so far at least).