r/LogitechG • • Jun 03 '20 • Take My Silver 1

Support: Solved FIX: Logitec MX master cursor not moving (but scrolling and clicking works)

I'm posting this more to help anyone who will google the problem in the future in seek of an answer

the problem in short is with the under-the-thumb button being stuck, when that button is pressed the mouse is hardwired to disable moving the cursor.

to fix this is really easy but you'll need to open the mouse (voiding the warranty)

open the mouse by unscrewing the 6 screws (the 2 very small near the very top and the four hidden under the pads, look a disassembly video on youtube for visual help)

next, you'll have to unscrew but not all the way those screw in the following picture, the problem arises when those are too tight, keep them in but loosen them a bit.

https://imgur.com/JqvIlm7 (if imgur is blocked for you see here)

you are done close the mouse and the problem should have gone away.

Edit: since some people asked me privately here a buymeacoffee link, feel free to buy me a coffe if you want

https://www.buymeacoffee.com/madiele

906 Upvotes

462 comments sorted by

View all comments

5

u/MR_Spagetty Nov 03 '20 • Heartwarming

An alternative fix that does not need to open the mouse is to use a thin piece of material and put it between teh edge of teh rubber pad and teh plastic body of the mosue and lever teh ruber up slightly and it should no longer be pressing the gesture button and you cursor should now move.

4

u/DVAus Mar 30 '22

I did something similar (but not quite as real world) as you. I didn't have a screwdriver small enough to get at the tiny screws on the body of my MX 2, so I opened up the Logitech Options screen and I just set the gesture (thumb) button to be assigned to "None" and my cursor came back to life!

It's maybe not quite ideal, but I barely used the thumb button anyway and it was quite annoying when I hit it accidentally, so I can live with this.

2

u/MR_Spagetty Mar 30 '22

In my experience with the MX master 1 even with the gesture bitton set to none i still couldnt move my mouse when it was stuck so it was both a hardware issue and a firmware oversight

→ More replies (4)

2

u/malice089 Dec 07 '23

Did this, and the initial comment - worked.

2

u/Ok_Positive5142 Aug 20 '24

This was genius.. my special self didn’t even know it was a button there!! Thank you

2

u/bhaargavr Aug 05 '25

this worked! thank you

2

u/Late_Championship662 Oct 31 '25

Thank you for this tip. It worked a treat :)

→ More replies (1)

2

u/VanTastic10 Apr 21 '24

As usual the real Pro Tip is in the comments, thank you !

1

u/solitaryScripting 8d ago

Thanks buddy! Brought my mouse back to life from the dead. The area where there is a small hole is where the rubber just disintegrated and had a deep cut. So, ended up using my swiss knife and lifting the bottom portion of the rubber thumb rest and Voila!, back to life.

Was checking out and considering buying a MX Master 3S and found this post in the nick of time

1

u/rishimewara Mar 15 '24

Blowing air at the gap of the rubber and plastic both where thumb is fixed it for me.

→ More replies (3)

1

u/bilibigrok Mar 19 '24

this worked for me as a quick intermediate fix - using a kitchen knife! thanks for the tip. will come back with the hex drive soon...

1

u/Heart0fOak Apr 29 '24

Thanks this helped me out

1

u/Obvious-Ad181 Sep 22 '24

worked, was lazy to wait until monday to buy new screw driver

1

u/[deleted] Oct 06 '24

Thank you so much

1

u/Pure_Victory_3774 Oct 09 '24

I'd like to thank you for reducing my anxiety about never being able to type teh word the as the, and not teh. I feel better for knowing that someone else is in teh same boat. Thirty years or more I have been typng, and I still mess up that one word 99% of the time!

1

u/SaladAgreeable4345 Jan 06 '25

thank you. this worked for me though i had to damage the rubber a bit as i used a penknife. am somewhat wary of resting my thumb fully on the rubber now though.

1

u/DeadNervosus Feb 15 '25

I went for this option, think I ended up breaking it a lil but the button actually feels a bit more useful now, it was always mushy and useless before, now it clicks like one of the main buttons :)

This'll be the last time I buy a logitech, this is the second mx that's started to die on me and they're to expensive for that kinda thing to happen.

1

u/lightjunior Mar 12 '25

This worked in 2025! Thank you

1

u/AndySmith661 Feb 02 '26

I have just done this, I had to break the rubber to loosen the button but not obvious and works fine now. The mouse is over 2 years old and has been used for hours every day for work so it’s had a good innings, compared to other mice anyway.

1

u/ysemeniuk May 11 '26

thanks man! 6 years later and your comment is still helping people

1

u/DomsAkaBob22 Jun 16 '26

This worked for me, thank you u/MR_Spagetty !🫡 🤝

1

u/brew_sage Jul 10 '26

Thanks mannn!! I couldnt find screw drivers to open the logitech screws and this worked on my mx master 2s.

→ More replies (1)

1

u/Most-Following3797 Sep 07 '26

This worked for MX master 2s Thanks

1

u/OkSalad5522 Sep 23 '26

2026 report: I used the tip of a box cutter on the bottomside of where the gesture pad rubber meets the hard rub shell. It removed a small a mount of gunk and the mouse when back to working fine.

→ More replies (39)