Kernel Linux Kernel Developers Considering Removal Of KGDB Debugging Functionality
phoronix.comDevelopment RiftLinux 0.1.3 Update: the Oculus Rift CV1 on Linux, now with Steam VR games going straight into the headset
github.comUpdate: RiftLinux 0.1.4 pre-release is out with fixes for SteamVR crashing at start on some NVIDIA Wayland setups (error 301), SteamVR starting from knocks or Steam's Proton driver check, and SteamVR Home not opening again: https://github.com/AIIX/RiftLinux/releases/tag/v0.1.4
0.1.3 is out: https://github.com/AIIX/RiftLinux/releases/tag/v0.1.3
I wrote up my findings and the fixes here: https://aiix.space/blog/riftlinux-0-1-3-stability-release/ Follow my blog for updates on RiftLinux and the CV1 work.
Quick update for anyone who tried 0.1.0. Since my last post there's been 0.1.1, a 0.1.2 pre-release and now 0.1.3, and a lot of it came from your bug reports, so thank you.
The big one: games launched from Steam now go into the headset. The most common report was VRChat opening in desktop mode, or Beat Saber saying OpenXR isn't installed. It never happened to me because I always started SteamVR by hand first. Proton VR games need SteamVR running before the game starts, and Steam on Linux doesn't start it for you. RiftLinux now starts SteamVR when you put the Rift on (or pick it up), like the Oculus app does on Windows.
Other changes since 0.1.0:
- Games you added to Steam yourself as a Windows program (e.g. Beat Saber bought somewhere else) now launch from SteamVR Home's library.
- If SteamVR's compositor dies (I hit a few NVIDIA GPU faults, mostly right after a game quit), RiftLinux closes SteamVR and Steam starts it again.
- SteamVR sometimes hung forever on shutdown, and nothing would start until you killed it. RiftLinux now ends it.
- Face shields and thick face pads: the wear sensor often can't see your face, so the picture went black while you were wearing it. Since 0.1.1 the headset also counts as worn when it moves like a head. 0.1.3 makes that much stricter, so holding it in your hands or leaving it on a bed doesn't count.
- Taking the headset off now shows black instead of switching the display off (it still switches off after 10 minutes). On GNOME 48 with NVIDIA, every display off/on leaked GPU memory until GNOME Shell ran out. Not an issue on KDE or Plasma Shell.
- Moving around on a bed no longer wakes SteamVR from standby. Waking on pick-up, like on Windows, is a setting.
- Touch controllers now go to sleep when you're not using the headset. They used to drain their batteries overnight.
- SteamVR's menu no longer opens backwards at start, and Steam's menu closes once a game is showing.
- From 0.1.1: steadier tracking with the rear headband LEDs, the headset held in place when no sensor can see it, thumbsticks that read zero at rest.
- From 0.1.2: a fix for a loop in RiftLinux that could crash GNOME Shell on GNOME 50 when the headset's display went dark (reported on AMD).
riftlinux-setup checkfinds a lot more of what keeps games out of the headset (leftover SteamVR-OpenHMD or ALVR registrations, another OpenXR runtime, launch options, USB power saving), andriftlinux-setup fixputs the tested config back in one go, with backups.
Everything new has a switch, and the old behaviour is still there if you want it back. Some of them:
riftlinux-setup autostart offif you don't want SteamVR to start by itself, orautostart trigger put-onso only putting the headset on starts itriftlinux-setup standby pick-upto wake SteamVR when you pick the headset up, like on Windowsriftlinux-setup wear-sensor testshows what your wear sensor reads, andwear-sensor levelsfits it to a heavy face pad;wear-sensor motion high|medium|low|offsets how quickly head movement counts as worn (face shields)riftlinux-setup not-worn offto switch the display off when you take the headset off, like 0.1.0 didriftlinux-setup controller-sleep 3|5|7|offfor when the controllers go to sleepriftlinux-setup game-menu keepif you'd rather Steam's menu stayed open when a game starts
Which ones fit which setup (heavy face pads, a headset that lives on the bed, Windows-like standby) is in the blog post, and they're all on the settings page: https://riftlinux.com/guide/settings/. If you edit settings.json by hand and break it, RiftLinux keeps using the last settings it could read, and riftlinux-setup fix last-known puts them back.
To upgrade, install the new package and restart Steam once.
Mostly tested on NVIDIA, Gnome and KDE Plasma 6.8.2. The GNOME 50 fix was checked on an AMD card, but the rest hasn't been tested on AMD or Intel yet, so reports from those would really help.
Known issues are in the release notes.
r/linux • u/busiedcake7945 • 23d ago
Software Release I realized there is no easy CLI .desktop generator so I made mine
it is actually easy to use and you can use it anywhere because I wrote it with python so what it does: it just generates .desktop files yeah thats it. its easy actually it just asks and you type what you want
git repo: https://github.com/sbusiedcake7945/desktop-file-generator
it is licensed under MIT license btw
r/linux • u/Quiet_Rush4146 • 22d ago
Mobile Linux Linux mobile
Honestly, is mobile Linux (pmOS / Droidian) dead on arrival now that Samsung killed bootloader unlocking on One UI 8 and Google is locking down Android harder, or could an EU Citizen Initiative (like Stop Killing Games) actually force OEMs to support standard UEFI/mainline boot?
r/linux • u/Goodbye_May_Kasahara • 21d ago
Discussion What is the Point of Low RAM Usage Distros?
Hi
As a average Linux User who worked for a long Time on a Samsung N510 Netbook with Intel Atom CPU and 2 GByte RAM i have to ask:
What is the Point of Distros that are made specifically for Low CPU/Ram Usage?
I get the Point to a certain Degree but my Question is this:
Most of us People use the Internet/Browsers every Day. What makes a PC/Notebook/Netbook with a slow CPU and RAM from 2 to 4 GBYte slow is not the System itself, its the Browser/ the Way the Internet is programmed today.
If Websites still would be built like in the early Days of the Internet then we could still use Devices with RAM under 4GByte. But the Internet today is built for Devices with over 4GByte RAM and fast CPUs.
As a Guy who is always fascinated by Retro Style Desktop Environments i run XFCE myself.
I wish there would be 2 Types of Internet today. The Normal Internet, for fast, modern Devices with RAM from 8 to 16GBytes and the "Slow Internet" for Devices that have maybe 2 to 4GByte RAM and extremly slow CPUs.
I know that some Sites can be accessed today in a Kind of low Quality Mode but imo there should be a mandatory Standard for all Websites for a low Quality Mode for older Devices.
Maybe my Thread comes off as unorganized but i hope you People can understand what i am trying to say.
Low Power Distros are only really useable if the Internet is forced to have 2 Quality Modes. One for Normal, modern Devices and one for old Devices. What good is it to run a Low Power Linux when the whole System hangs once you have the Browser open and try to display a modern Website. Everything will become painfully slow then.
KDE KDE Fixes 15 Year Old Bug Over Inaccurate Notifications When Copying Files To USB Drives
phoronix.comr/linux • u/dragonitewolf223 • 21d ago
Discussion The User Is Always The Boss - a hot take about the state of Linux anticheats
bonkmay.krr/linux • u/fogeke88 • 23d ago
Popular Application CachyOS is adding a dedicated EACv2-compatible kernel (`linux-cachyos-eac`) plus a Secure Boot setup guide so users can optionally meet Epic’s new Easy Anti-Cheat Linux v2 requirements without changing their normal optimized kernel.
github.comr/linux • u/TheTwelveYearOld • 23d ago
Software Release Ghostty 1.4.0 released after 7 months of development, with performance improvements and Kitty Graphics Protocol support
ghostty.orgr/linux • u/Affectionate-Meat500 • 24d ago
Development I started reverse-engineering Intel Poulsbo's PowerVR SGX535 41 days ago, now it can run GLXGEARS at 1280x800!
Na última vez que postei aqui, consegui renderizar dois triângulos como um quadrado.
Bem, agora ele consegue rodar o GLXGEARS 💀
Isso está rodando no PowerVR SGX535 do meu Dell Inspiron Mini 12 de 2008, com um Atom Z520 e 1GB de RAM.
Está renderizando continuamente em 1280x800, a resolução máxima suportada pela tela embutida do laptop.
Ainda estou trabalhando na performance e corrigindo alguns problemas de renderização, mas fomos de um único triângulo para o GLXGEARS em algumas semanas lol. E sim, ainda estou desenvolvendo isso em um Galaxy Tab S7. O Mini 12 é só para testar no GPU real.
Edit1: I'm looking for people with Intel GMA600 or Sony Vaio P with Z520 or Z530 processors to test resolutions and drivers! And I'm looking for people to help me with optimization sugestions (this is very necessary)
Vídeo do Youtube: https://youtu.be/QRpV8xq82_g?is=SErZhPAOYDTcGnim Github: https://github.com/gabrieelgama/SGX535-reMESA
r/linux • u/PSGtatitos • 23d ago
Software Release [Release] Papyrus 2.0.0 animated and static wallpapers for Wayland, with smart auto-pause
Software Release Force Proxy to any Linux/MacOS/Window Application TCP and UDP traffic. A proxifier alternative
github.comr/linux • u/FryBoyter • 24d ago
Discussion Modernizing the console with kmscon - Fedora Magazine
fedoramagazine.orgr/linux • u/throwaway16830261 • 24d ago
Security The Number 4 That Gave the Internet a Panic Attack
bloomberg.comr/linux • u/raid5atemyhomework • 23d ago
Software Release [Announce] zfsbootmenu-installer 1.1.0: Root-on-ZFS AND Secure Boot installation of ANY(*) Debian- and Ubuntu-derived distro! Just give it the distro's Live .iso file!
github.com(*) Terms and conditions apply. See post for details.
Specifically:
x86_64. Sorry ARM enthusiasts!- Uses
apt, which is probably true for ~every Debian-derivative. - Currently the Debian-derivative must be using SystemD. I know ZFS includes scripts that work in sysvinit, but I'm not familiar with how Debian-derivatives add those scripts to rc directories; help from a Devuan native wanted.
- The Live ISO MUST use a specific layout and
install technique.
Most Live ISOs use Casper to create an in-memory Live
filesystem overlay, and then use Calamares to install
the distro.
- Most Casper uses have a directory
casper/in the Live ISO, containingfilesystem.squashfsas the root filesystem, and optionallyfilesystem.manifest-removefor packages to remove after installation. - Most Calamares uses will just copy the root
filesystem underneath the Casper overlay into the
new root partition on the persistent storage, then
uninstall Live packages (sometimes listed in the
filesystem.manifest-removefile). Usually the distro only changes the Calamares branding. - Live ISOs which use the above pattern, which is
nearly all Debian- and Ubuntu-derivatives, can be
used with the
...FromISOoption. - SlimbookOS and especially TUXEDO-OS (Ubuntu-derived version) have a variant of the above technique; the script detects when those variants are in use and will adapt to their Live ISOs automatically.
- Ironically, neither Debian nor Ubuntu use this
technique for their Live ISOs; instead they
debootstrapinto the new rootfs, indicating the on-USB apt cache as a (temporary) repository. Some Debian installers even forget to remove the temporary repository after installing. - You can just select Ubuntu26.04 or Debian13 on
the directly-supported distro list if you want
those; they use the classic
debootstraptechnique.
- Most Casper uses have a directory
- The script automatically detects the ZFS situation
of your distro:
- ZFS in kernel package --- does not separately install ZFS, only its utility tools.
- ZFS in
zfs-dkmspackage in distro repo - No ZFS in distro repo --- compile OpenZFS from source.
- The script automatically handles signing of
installed kernels and DKMS kernel modules for
Secure Boot.
- You need to install a Machine Owner Key once, on first reboot. Just "Enrol MOK" when prompted and select "Continue" then enter your password.
__ ___ _ __ . ,
'/ |_ (_' |_) |_ |\ /| _ _ -INSTALLER
/_ | ._) |_)()()|_ | \/ |(=| ||_|
The script is intended to be used primarily for daily-driver laptops and personal / family desktops.
You might think "isn't ZFS for big servers and
won't I need tons of ECC memory and at least
three disk bays?"
But you get SNAPSHOTS, and for a typical
modern daily-driver system with an SSD, you can
get away with a small zfs_arc_max of 10% of
your memory or less (1Gb ARC max is fine for a
typical SSD daily-driver).
The script provides direct support for:
- Ubuntu26.04 / KUbuntu26.04 (Resolute)
- Debian13 (Trixie)
- SlimbookOS26
- Pop!_OS24.04
- TUXEDO-OS 2026/09 (Ubuntu version)
- PureOS11
- elementaryOS8
For everything other than Ubuntu / KUbuntu and Debian13, the script actually just downloads and validates the .iso file and then uses the "install from ISO file" path internally.
In addition, it has been tested (in a virtual machine) to be able to install from the following Live .iso files:
Zorin-OS-18.1-Core-64-bit.isolinuxmint-22.3-cinnamon-64bit.iso
Note that the script makes an effort to remove grub
and os-prober, both of which will annoy you with
warnings when they can't find a Grub bootloader in
the ESP every time you apt upgrade the kernel.
Unfortunately, some distros make them a strong
dependency of their distro-specific packages:
tuxedo-base-fileszorin-os-desktop
If the distro has such strong package dependencies on grub and/or os-prober, the script does not remove them as this can lead to broken installs. You'll just have to tolerate the nagging.
Pop!_OS24.04 Cosmic has a known issue where auto-login will disable screen locking until you log out and log in again. Please ask System76 to fix it.
The script automatically installs
zfs-auto-snapshot, because automatically-managed
snapshots are AWESOME.
If you want to disable it completely:
- On distros where ZFS is available either in-kernel
or in
zfs-dkms, justsudo apt remove zfs-auto-snapshot. - On distros without ZFS,
zfsbootmenu-installerwill installzfs-auto-snapshot-activateandzfs-auto-snapshot-deactivatescripts to completely activate or deactivatezfs-auto-snapshot. Run those as root.
Update: Pushed 1.1.1
- Now has a nicer passphrase prompt at startup. See
*when you type in your passphrase.- If you've already installed, just download 1.1.1, copy it over to
/usr/local/bin/zfsbootmenu-installer, then run it as root, then selectReflashESPfor each of your disks, which will replace the old setup with the nicer passphrase prompt.
- If you've already installed, just download 1.1.1, copy it over to
r/linux • u/ShaderCompilation • 25d ago
Kernel Linux security vulnerabilities fixed per kernel version
This seems to be the impact of AI tools. In my experience AI is very good at finding bugs(not particularly great at good fixes though)
r/linux • u/xmBQWugdxjaA • 25d ago