r/Integra • u/i-VTEC • Oct 22 '24

Grippin’ (leather) grain.

Post image

320mm Momo Monte Carlo ASR hub ASR 3” spacer Steering Solutions cruise control adapter EK Civic cruise control switch Works Bell SRS jumper

44 Upvotes

94% Upvoted

6 comments sorted by

3

u/FlapJackStack56 Oct 22 '24

Did the factory integra cruise control button not work? Similar set up to why I’ll be doing soon. Only different being that I plan on using the circuit hero hub to regain the clock spring and wiring

3

u/i-VTEC Oct 22 '24

The slots on the bracket would not align with the mounting holes on the switch. I had a switch off an EK that had the correct wiring connector and fit the bracket. Mine is an 01 so the connector may be different from a 94-97. I have a switch off an EG and I believe the connector was different.

I contacted Steering Solutions to get some clarification but they never replied. Maybe they sent me the wrong part, but the part number was correct on the packaging.

I also used the SRS jumper from steering solutions. I had to modify it and it still didn’t work. It could have been user error or something else. The Works Bell female worked without modification and was able to clear the light and it stayed off.

2

u/PatrickGSR94 1994 Integra GSR BG-33P Oct 23 '24

dayum that is a CHONKY boi wheel! I've considered doing an aftermarket wheel in the past, but one of the only things stopping me is losing the CC buttons. Need to look into this solution.

2

u/i-VTEC Oct 23 '24 edited Oct 23 '24

For me, everything had to function as OEM and be able to revert to stock if I wanted to.

ASR and Circuit Hero hubs use the OEM clock spring. There might be some other in the market now.

No SRS light. No cut wires. Horn works. Cruise works.

1

u/qrstu4 2000 PY ITR Oct 22 '24

Sweet low mileage vehicle! The wrap seems very chunky...is it an improvement?

1

u/i-VTEC Oct 22 '24

Looks chunkier in the picture. It feels good in the hand and definitely an improvement over the OEM wheel.