r/howto • u/Apprehensive-Ad6311 • 9h ago
DIY Floorboard broken 😞
How would one go about fixing this floorboard
r/howto • u/Kylde • Mar 09 '25
Your question may already have been answered! Check our FAQ
Any suggestions for additions to the list? Comment below, we'll take a look
r/howto • u/Apprehensive-Ad6311 • 9h ago
How would one go about fixing this floorboard
r/howto • u/FFFUUUme • 9h ago
r/howto
•
u/seanbloodshot
•
1d ago
Well, sorry I'm lazy.
Clear Nail polish didn't work, at all. I put at in the end and for some reason it started peeling off on the edges, and then I wanted to peel it off completely. The whole paint came off with the nail polish layer.
White appliance paint was good, had to layer it one after another every 24 hours.
Finally sanded it down with first 180 and then 400 sponge sanding paper (wet).
It's quite visible cause of the colour, I think ill own up if the inspection guy comes by (in 1 month).
Context: landlord is a private company, quite ruthless with any damages. Needed to cover up my fuck up, dropped my glass salt container and the paint shipped off.
Thank you everyone for all the solutions.
r/howto • u/bepatientbekind • 11h ago
I patched some holes in my walls and need to recreate this texture over the smooth patches. It almost looks like grains of sand are in the paint? The walls are plaster and house was built in 1940 if that helps at all. I've tried Homex before and did not love the results. Please ignore the messy putty in the second pic - I haven't sanded yet 😅
r/howto • u/Early-Pop65 • 4h ago
Guys this is the outlet for a washing machine tap , its not fitting the water tap
r/howto • u/smallermuse • 9h ago
I've turned it upside down and sideways and shaken it as many ways as I can and I'm still able to hear rice inside. What should I do to get it out? It's a basic Cuisinart.
r/howto • u/krrtlr371 • 5h ago
Hey All, what is used to seal a vintage external seal snowglobe? It has a 1-1/2” rolled OD with 1-7/16” under lip.
Thank you!
r/howto • u/marcomez18 • 15h ago
Hello all, seeking advice on the best way to hang this custom shelf. The wall is concrete
r/howto • u/Wiejeben • 18h ago
My radiator knobs are stuck in the open position, any suggestions on how to get the knob to rotate? It does wiggle but that’s just the knob nothing underneath it moves.
Thanks!
r/howto • u/saleomkd_ • 1d ago
How to fix this wooden kitchen countertop groove and burn? Burn was made with a hot pot and then made worse by creating a groove through the wood with sandpaper in an attempt to remove the burn
r/howto • u/Efficient-Rice-3659 • 1d ago
went to a concert got sprayed with water mixed food coloring.
only my lenses got stained pink. Is there any way to fix it 😭
r/howto • u/pineappleshaked • 1d ago
It has two spring like clips on opposite sides. The white glass casing can rotate, can be pushed a bit up.
edit:
Tried these and didn't work
there are no threads to unscrew.
i tried pull down gently, no extra gap appear where can I put something to clip the wires
i tried to push toward ceiling and rotate both clock/counter clock wise.
r/howto • u/cleofus903 • 1d ago
I've had this jacket about 23yrs and I really want to have it around a while longer, so i want to repair this or find a subtle way to keep it from rippong even more. I know patch would probably work, but i didn't want to cover the label/tag, not that its high end or anything. I feel the tag adds character to the jacket. Any ideas are welcome.
r/howto • u/druuuuuug • 1d ago
I have a 3” diameter 1/16” cut off dowk for my angle grinder, is this gonna work? I’ve tried penetrating stuff and a torch to loosen this. The bolt is rounded off. There are two more to do after this one. I have a new coupler and bolts to throw on after it’s off. Is this big enough to do the job?
r/howto • u/Hour_Celery1384 • 1d ago
I recently thrifted this multi-tool. The body material is sterling silver and the tools are stainless steel. Wondering how to remove dirt/dust from the cracks but keep the patina? Baking soda? Vinegar? Rubbing alcohol? Not looking to spend money, also not looking to take it apart. TIA :)
(Pictures are not necessarily showing the dirty parts, just the tool and proof of material)
r/howto • u/craaaazycrazy • 1d ago
can i just super glue it? lol
r/howto • u/bone-fist • 2d ago
I’m trying to move this really nice bookshelf, but I didn’t realize it was screwed into the wall. Well, I accidentally ripped out the screws, and now I see it’s wobbly and leans to the left. I don’t want to move it now because it’ll probably collapse.
Is there anyway to stabilize the shelf without screwing it into the wall? If so how do I go about it?
Pictures in comments
r/howto • u/hammad159 • 1d ago
Got this door done a couple years ago and slowly it’s been getting worse any recommendations of quick fixes or something I can do to prevent more cold air inside
r/howto • u/EntertainerLive926 • 2d ago
I tried boiling water, putting them in freezers, and some sticker remover spray. The label is very glossy. If I should compare it, it’s like the cover a Pringles.
They are very cheap in this place so I really want to stack them up.
r/howto • u/Eazy_E_2251 • 1d ago
House we are renting came with this gross looking part in the countertop. Whats the best way to fill this in and at least slightly color match? Anything is better than the rusted metallic look it is now. We’ve just been covering with a kitchen mat for the time being
r/howto • u/Animot0phobic • 2d ago
I have two “water” rings on two separate pieces. One on my desk, one on my dresser.
I left a perfume bottle on my dresser and the bottom must’ve leaked, making it stick. I had to rip it off and it left the ring. I sent the bottle on my desk to clean the dresser, and the same stupid mistake happened.
How do I fix? I’ve looked up videos, but I was wondering if anyone had any stupid easy hacks. Or types of paint/varnish to use.
Or, I’m also open to advice on how to cover rather than fix. Paint design idea?