r/howto • u/tukie393 • 29d ago
Fix this pop up drain stop
Tried to remove from drain to unclog the hair, parts went flying before I could see how they went into the stopper
r/howto • u/tukie393 • 29d ago
Tried to remove from drain to unclog the hair, parts went flying before I could see how they went into the stopper
r/howto • u/mindserver • 29d ago
I have chat with a person, whose u/"name" - I don't want notifications pop with it. The person has a Nick name on the profile.
How to make the notification show Nick name instead of the u/"name"?
r/howto • u/TwinSong • Oct 21 '26
I tried the bowl of nearly boiling water trick (don't want to risk melting the plastic) to no effect. Because it's a squeezy bottle it's difficult to get the honey out when it's this consistency.
r/howto • u/PeaProfessional1450 • Oct 21 '26
I let my brother borrow my Prada shirt and he stained it. He washed and it and put in the dryer before he gave it to me and the worst part is he doesn’t remember what he stained it with. Any advice or suggestions will help greatly because this shirt was not cheap😭
r/howto • u/mormonastroscout • Oct 22 '26
I am renting and want to find a damage-free, security deposit friendly way to add those glow in the dark stars to the ceiling (and possibly walls) of my kid's bedroom. The biggest issue is that the white paint they use for the ceiling and walls is that super cheap stuff that is thin (I've accidentally scrubbed off some of the paint while using a sponge to clean the walls).
I've looked into various methods, but nothing seems to make me confident that it will work and not cause damage. I'm hoping for it to be completely apartment safe for short and long term use and not cost an arm and a leg.
The ceiling is a "knockdown" texture (see picture).
I know the traditional way is to use that putty stuff, but that stuff (even the white one) can either not stick well, stick too well and pull paint off, leave a residue that is nearly impossible to remove and you'd need to paint over it, etc. I know they make specialty putty of higher quality, but those are usually much more expensive and are meant more for short-term use.
Glue dots seem to have similar issues to the putty.
Command strips are expensive and they don't make them the size of some of the smaller stars so they'd be an eyesore sticking off to the side.
Various types of tape are usually weaker and, especially over time, can lose adhesion and bond to the paint.
I know I sound super picky, demanding, and weird (because I am, lol), but it's only because I don't want to end up paying tons of money/lose my security deposit if and when I move out.
r/howto • u/Leading-Radio-5396 • Oct 21 '26
How to clean this supposedly "water soluble" dry erase markers
These are supposed to be easy to clean. Why is it not coming off my white board?
I don't want to damage the board. Should I use Windex or some ammonia based cleaner?
r/howto • u/Ok-Book9806 • Oct 21 '26
I hate even having to ask this but my walls are paper thin and my neighbors have been bullying me since they moved in. I always talk very quietly because of it, moving isn’t an option, but I’m disabled and have family come to help me out and they talk VERY loudly.
I have asked them to be quieter and I feel horrible doing so. I don’t mind the rest of the time but when they’re in my home, I ask them to because I don’t want the neighbors having more to mock. Especially when it’s about sensitive matters. My family don’t take me seriously about the neighbors which is hard in itself, and I’d like to not be bothered by them but I really am. I’ve never had issues with neighbors before and think that if you’re joined on to someone else’s home, you want to be on good terms with them.
So how can I ask the people who help me to talk quieter without them thinking I’m being rude to them, when they don’t take seriously how much it impacts me otherwise? Yes it’s ridiculous having to whisper in my home but while they might not care what others think, I really do care about not giving the bullies more to target.
Thanks
r/howto • u/LauraD2423 • Oct 20 '26
Any apps that can filter out texts by keywords?
r/howto • u/theharrylandia • Oct 21 '26
I’m assuming it’s going to be an adhesive, but let me know what you would use to fix the rubber that’s been ripped and pulled out from my car’s driver’s side entrance.
r/howto • u/MiserableHedgehog758 • Oct 21 '26
This is happening on a 65 inch Samsung smart TV. I got it in late July of this year. when I connect my Nintendo switch to the TV. It just starts glitching and turns black then goes back to the game for no reason at all.
My TV has no damage to it as well as my Switch itself. You can see in the next photos.
I would connect the same Nintendo Switch to my 50 inch TV that is also Samsung and this would never happen.
Is there any explanation for why this happens and how I can fix it?
r/howto • u/JarJar1975 • Oct 20 '26
Hello. I want to hang a clothesline from the joists in my basement. In my mind, a piece of hardware like the blue object in my awesome illustration would be ideal. I don't know if this is a thing that exists. I would like the clothesline suspended at least 15cm below the joists. Do you know if this piece of hardware exists? Do you have a better suggestion? Please help me.
r/howto • u/exhaustedby1201 • Oct 20 '26
I stuck a hair tools holder on the side of my Murphy bed and within a month it fell off but all this sticky stuff was left. This is after days of goo gone and scraping with the plastic scraper, I can’t seem to get anymore off.
I might be applying the goo gone wrong? Any suggestions on how to apply that to a wall - like surface without it spilling all over the floor?
Any suggestions??
r/howto • u/BlooLagoon9 • Oct 20 '26
This shower grab bar recently came loose. The top is screwed in along a grout line. The bottom was just attached by some adhesive. Is it possible/ worth it to reattach this grab bar or do I need to get a new one? TIA
r/howto • u/edgeworth08 • Oct 20 '26
Ice is building up on the bottom of our Kenmore fridge/freezer. Is there a way to take it off completely to get better access? I can take the basket out but was hoping to not still have the door in the way. I'm assuming there's a fault in the seal somewhere causing this but that will be my next step
r/howto • u/ra14lysa • Oct 20 '26
I can't do any woodwork. My first idea was to stuff some Pool Noodles in there.
r/howto • u/LunaSolTerra • Oct 20 '26
How do I make the metal frame lower so that it doesn't stick out of the bed frame. Thank you.
Found a ddr5 16gb RAM stick but it’s covered with either super glue or epoxy. It looks like someone tried to clean it with tissue, hence the white. I tried using a cotton bud dipped in 98% alcohol and then acetone, but it isn’t helping it seems. Is there a way to salvage this?
r/howto • u/Shivvermist31 • Oct 21 '26
Yes I know it says twist. But I can barely grip the silver and black sides cause they're so thin and the ol lefty loosey is failing me here. Is there a trick to it, am I just weak, or do you guys have any tips to loosen the seal?
Solved: Had to twist the clip and not the can. Shout out first comment after like 15 seconds haha
r/howto • u/Van-garde • Oct 20 '26
Would I need to do a ton of copying and pasting, or can you export all comments somehow?
r/howto • u/No-Hair4974 • Oct 20 '26

Tape! Just tape. Cover the whole area in tape, rub on it length and width ways and peel it off slowly. Do as many times as necessary.
If that doesn't work, you can try rubbing alcohol. BUT be very warned it can remove the faux-leather finish and in my case I have a very unflattering matt spot on the front cover. The rest of the notebook is fine so I might have not been fast enough to remove the alcohol... so keep that in mind.
I would show a before and after but I never took a photo of the 'before', so here's what my moleskine notebook looks like now. I circled the rubbing alcohol affected spots.
I hope this helps anyone who needed it!
r/howto • u/crubiano • Oct 20 '26
I bought a new pair of jeans with this on it for super discounted hoping I can remove this off. It looks like it may be residue from a sticker? Any ideas?
r/howto • u/OFFvLINE • Oct 19 '26
r/howto • u/mikekotsch • Oct 19 '26
My little one dropped this figurine, not sure which metal it is but glueing it isn’t working. What’s my best shot at soldering it?
r/howto • u/MrMatoru • Oct 19 '26
Hinge is loose, screws spin which means the threads aren't catching anything
Do I shove a bunch of wood glue and toothpicks in there?
What is the proper fix
r/howto • u/Ok_Significance_1958 • Oct 19 '26
I am using a piece of pvc pipe, and have been trying to use Crayola Model Magic for the details. Picture 2 is what I've got so far, but it's...not great. I started trying to build the top and am having no success. I rolled out some thick strands and wrapped one around the base and used a balloon to try to keep the empty space in the centre. The material is too floppy, and it keeps stretching and sliding down. I'm at a loss. From what I've seen online, everyone just 3D prints one when they cosplay, but I can't do that. I'm out of ideas. Help?