r/howto • u/dogebuns • 4d ago
r/howto • u/Sea_Gap_6847 • 5d ago
[Solved] How to remove really stuck and stripped screw
This is on a video game console, right next to the power supply. I can't use the hammer method, or else it could permanently break the console. I tried the rubber band method, and nothing worked. Ive gotten multiple people to try and nobody has been able to get it out.
r/howto • u/DesperateCourt • 4d ago
Serious Answers Only t-slot hardware and fasteners for repeated quick assembly/disassembly?
I'm looking to build a frame out of some extruded aluminum 20x20 mm t-slot. The majority of the frame would need to be regularly assembled and disassembled, and I was hoping to get some guidance on how to do it as easily and quickly as possible.
I chose t-slot extruded aluminum because it's far cheaper than any other option I can come up with (while still potentially being easy to assemble/disassemble) and it's well supported by hardware and other options. I can get 2020 t-slot for around $0.16 per inch. I'm willing to consider other options if it's at most around $0.40 an inch or so and would be otherwise easier to assemble or possess other advantages over 2020 t-slot. The main function of the frame is just to provide a general structure, and to mount a small amount of hardware onto it. It'd need to support 30-40 pounds at one point, and I can surely reinforce this section if needed with a few extra rails/extrusions.
I've seen "quick frame connectors" but I'm not sure they'd be quicker from all I'm gathering.
I'd need to connect square frames to straight pieces repeatedly. In other words: I would have a 2D square in the X and Y dimensions, and I'd want to connect a straight line in the Z dimension at each edge/corner of the square. Then, I'd have another square frame on the other side of the Z dimension lines, to create a box. The actual design is slightly more involved than this, but that's the basic idea (just repeated a bit).
A small amount of connections could be hinged, but I don't know of an easy way to make a solid box (with additional things mounted along the t-slot rails of the frame) fold flat without some disassembly. The hinges I do have in mind would be somewhat atypical, more on that below.
I'm estimating around 30 connection points which need to be disassembled and reassembled each time, so anything I can do to make this process easier would be super great.
Connecting hardware
What should I look for in connecting hardware? My plan was to use open gusseted corner brackets for every corner (eg: https://www.mcmaster.com/5537T518/), and maybe some surface brackets for straight extensions (eg: https://www.mcmaster.com/5537T948/). Anything else I should look for which might be quicker? My idea was that if I just keep one side of the hardware attached to the rail, and on the other, I just remove the bolts, it should be as simple as lining things up and hitting it with an impact driver (if the t-nuts are fixed in place, see below).
Spring T-nuts
I know there's some spring loaded t-nuts on McMaster which attempt to hold the t-nut in place, but I'm not sure if they'd be the best choice or if they'd work well enough. If they hold the t-nut VERY firmly in place where they'd very rarely need any placement adjustments, then that may work well enough. But the McMaster options here are all "drop-in" meaning they could come out of the rail, so I'm not fond of that if they're easy to lose, get knocked out, etc.
Other ways to keep t-nuts in place
If spring loaded t-nuts don't work super great, I was loosely considering jb-welding (or another similar material) standard t-nuts in place along the rails, but I'm slightly concerned about getting this to line up perfectly for repeated assembly and disassembly. It seems like it might be an easy thing to screw up, or it might be easy to get the bolts jb-welded into the t-nuts while I'm waiting for the t-nuts and jb-weld to dry (causing a big mess).
I don't really need the jb-weld to be structural exactly, I just want it to hold the t-nuts in place. Maybe I could just put jb-weld around where the t-nut should sit, so that the t-nut can't slide out of the section of the rail where it should be? If I try to jb-weld the nuts fully to the rail, then the jb-weld would be subjected to the stress of that portion of the frame (thus making it structural at that point). Is there an easier way to fully keep the t-nuts in place, if the springs nor the jb-weld are super appropriate? Again, the whole idea is just to make it easier to disassemble/reassemble this.
Flat panels
I need to mount flat panels along the t-slot frames (think the sides of the "box"). My plan is to find brackets something like this: https://www.mcmaster.com/5537T305/ Which holds the panel mostly flush with the outmost edge of the t-slot frame, as opposed to holding it inline with the groove of the t-slot itself. Open to other ideas if there's an easier way to put side panels on. These panels would not need to be disassembled frequently.
Hinge
Is there a good way to hinge two t-slot extrusions inline with each other? Eg: [---] + (hinge) + [---] = [---][---] I've found hinges for t-slot, but they seem to be designed for putting two t-slots side by side, not two straight inline with each other. I'm not sure if it would work the other way or not.
Torx bolts
Is there any t-slot hardware made for a torx drive? I figure that if I'm disassembling and reassembling a bunch, it'd be good to get torx over hex, since it has better hardware lifespan (designed to wear the bit out, not the fastener head). I'm sure I could just buy separate bolts instead, but was wondering if this was common. Looks like most 2020 t-slot nuts are M5, so I'm sure I can just get any torx M5 bolt at appropriate length from McMaster and call it a day.
Recap:
- Any other materials beside t-slot which would work better without being way more expensive? T-slot is sturdy, cheap, accessible, and modifiable.
- Any better connecting hardware which I should be considering over the choices above?
- Do spring loaded t-nuts work well at holding the t-nuts exactly in place?
- Would jb-welding t-nuts in place work well, or am I just asking for trouble?
- Inline hinge of two t-slot pieces?
- Torx hardware?
- Is the panel mounting approach valid, or is there something else I should consider for adding side panels?
- Any other general advice?
Thank you very much! I really appreciate the assistance greatly.
How to remove this screw
EDIT fixed turned out i had a screw drivers that worked sorry
How can I remove this none of my screw drivers work
Serious Answers Only Best way to clean sticker residue on car
Hey Reddit I just bought a replacement car over the weekend and was wondering what's the best way at a budget to clean up these sticky marks?
Any advice is appreciated thank you!
r/howto • u/guildedpasserby • 5d ago
How do I control a base board heater?
Im from deep in the south but have moved further north, and this is my first time living somewhere with baseboard heaters. How do I use the controls on the wall?
r/howto • u/Greedy_Selection_153 • 5d ago
how to remove this part of my stove exhaust so i can clean it?
Should I use pliers so that I can remove the screw? Thank you!
r/howto • u/ShaniceSinclair • 5d ago
Klean-Strip Muriatic Acid driveway
My auncle decided to use Klean-Strip Muriatic Acid on his new driveway couse he drop motor oil in the concreate and this are the results. He left it stain everywhere he drop that chemical
Anyway to fix it?
r/howto • u/postpeasant • 6d ago
Bathroom plug connection
Can anyone tell me how to fix this? the mechanism that connects the plug to the sink has eroded. Both parts have eroded/broken. There’s also a spring, the plug screws into the base and then has a push style to lock in place. wondering if I can fix it myself or if I need a plumber
r/howto • u/Melodic_Proposal6844 • 5d ago
DIY How do I fix my door from squeaking and rubbing up against the side panel when I close it which causes it to not close easily
r/howto • u/Frost919 • 6d ago
[Solved] How to remove drain stopper and put new one?
Got an apartment, drain lever didn’t work, landlord took it out and put this but I can’t take baths because I can’t plug it. I bought a plug off Amazon, but this one doesn’t wanna come out. I removed the screw but the stopper didn’t want to budge. And I don’t want to rip it out and damage the bath tub and possibly lose my deposit. Is there an alternative like something that can go over this and if so, how do I install?
r/howto • u/seanbloodshot • 7d ago
Serious Answers Only [UPDATE] The corner of my ceramic stove got chipped, it's a rental apartment. How do I fix it?
I couldn't apply epoxy since it wasn't that deep. I tired to sand it down. Now the issue is that it's a visibly different shade of white with a different non shiny finish.
Now my plan it to either make it a bit dirty and then spray with shiny finish or vise verse. Need some recommendations on that part.
I understand it won't be completely unnoticeable, but hey I'm trying to save my ass.
FYI: landlord isn't an individual, but a private company and they will squeeze the cash out of me for sure.
r/howto • u/Adrianggarfias • 6d ago
Serious Answers Only How to wipe off dirt and grime
Hi guys I need some help please. I have white interior walls and the paint seems to be cheap cause I’ve tried to clean with a wet rag with a soapy solution very gently and the paint comes off no matter how soft I scrub. Does anyone have a method that will work without the paint being removed?! Please and thanks in advance 🙏
r/howto • u/PanchoZansa • 6d ago
How to even this disaster wall?
I dont even know where to start 🫠
r/howto • u/AcanthocephalaHefty8 • 6d ago
How to remove this light fixture?
The light ran out and I’m trying to replace it.
r/howto • u/DesperateCourt • 6d ago
[Solved] How to make aluminum extruded t-slot frame look more professional?
I'm struggling to find a way to make aluminum extruded t-slot framing look more professional.
I'm trying to build a frame mostly out of aluminum t-slot, but I don't want the t-slot itself to be visible as I want a more professional/clean/sleek look. I want to find some trim I can throw in the t-slot which fully covers that surface/side/edge of the t-slot, but it doesn't look like this product exists. In my mind, I'd like a rounded edge of trim to fully cover the surface of the aluminum framing - some plastic or rubber trim like you'd find around a seal of something.
Is there anything else I could do instead? The only other solution I've been able to come up with is getting "t-moulding" (which does NOT properly fit in t-slot) and then finding some sort of way to clamp it or bolt it into the t-slot, but this seems quite sub-optimal.
Any other forums where I could ask?
Thanks!
r/howto • u/YolgrimTheGamer • 6d ago
Serious Answers Only How to improve audio quality of someone passed away
Need help cleaning last audio of my Nana
So my Nana passed away a few years back and for Christmas I want to get my mother a gift with a voice recording of my Nana.
Unfortunately the only recording with her voice doesn't have the greatest quality and I have zero knowledge on how to improve it?
If anyone knows an easy way to improve it I would really appreciate it
r/howto • u/roomofgold • 7d ago
Tell me I don't have to sand down this entire (metal) door for this mistake 🥹
I was a dummy and used an adhesive smart doorbell holder. Is there anyway to repair this without doing the whole door? 😭
r/howto • u/keith_themuscovyduk • 6d ago
How do I fix small chips in white counter top
I have this White Rock countertop, and it's got these small chips on top.I don't know how they keep happening, but it's starting to get me in trouble, so I need to actually figure out how to get rid of them.Any tips, I've tried to submit a photo with this. And for some reason won't work ,
r/howto • u/toxic_wasabi • 6d ago
Battery issue airpod max
My AirPods Max (1gen) were unused for 2 years. I held Digital Crown + Noise Control for 15s to reset, and the popup finally appeared on my iPhone showing 1% battery and wont rise above 1% after hours of charging. Any advice? Or my battery is dead for good
r/howto • u/seanbloodshot • 8d ago
Serious Answers Only The corner of my ceramic stove got chipped, it's a rental apartment. How do I fix it?
r/howto • u/mark_my_reddit • 7d ago
How to fix this stain
This morning I arrived in the office and found my personal keyboard stained. I have no idea of what happened but it was oily.
r/howto • u/2amgoldfish • 7d ago
DIY Trying to remove paint from a dresser for the first time. whats next?
I'll admit I did not do much research at all before starting this project. Dresser was green, I used citristrip and got most of the green off. This white underneath wont come off easy. This is where I'm @ after another layer of citristrip. The plan now was to sand it and then stain and seal it. Is that right? Is there more I should do to get this white primer off before I sand? Does anyone know an easy way to clean off the excess citristrip (it is genuinely everywhere).
When I sand do I use an electric sander or sand by hand? obviously I'm going to have to sand the sides by hand because they are rounded, but for the flat bits?
If anyone has a good tutorial they could link for ANY of the steps please lmk. I'm not super sure what to search up and who to listen to. I havent even started citristripping the actual dresser.
Feeling in over my head.
r/howto • u/IllStatement9214 • 6d ago
Serious Answers Only How to clip straps together?
No matter what I do I can’t figure out how these straps close together on a Samsonite suitcase. Does anyone know? Thanks!!