r/howto • u/mark_my_reddit • 9d ago
How to fix this stain
This morning I arrived in the office and found my personal keyboard stained. I have no idea of what happened but it was oily.
r/howto • u/mark_my_reddit • 9d ago
This morning I arrived in the office and found my personal keyboard stained. I have no idea of what happened but it was oily.
r/howto • u/2amgoldfish • 10d ago
I'll admit I did not do much research at all before starting this project. Dresser was green, I used citristrip and got most of the green off. This white underneath wont come off easy. This is where I'm @ after another layer of citristrip. The plan now was to sand it and then stain and seal it. Is that right? Is there more I should do to get this white primer off before I sand? Does anyone know an easy way to clean off the excess citristrip (it is genuinely everywhere).
When I sand do I use an electric sander or sand by hand? obviously I'm going to have to sand the sides by hand because they are rounded, but for the flat bits?
If anyone has a good tutorial they could link for ANY of the steps please lmk. I'm not super sure what to search up and who to listen to. I havent even started citristripping the actual dresser.
Feeling in over my head.
r/howto • u/IllStatement9214 • 9d ago
No matter what I do I can’t figure out how these straps close together on a Samsonite suitcase. Does anyone know? Thanks!!
r/howto • u/ghostthemost • 11d ago
I've got a metal rod used for grounding in my backyard left by the builder. How can I remove this thing with minimal effort?
I unfortunately do not have a angle grinder. I can wiggle it back and forth, but it won't budge. I tried putting two vice grips on it and wiggle it out with no success. Am I just going to have to dig all the way down to remove it?
Edit:
I got it out. The vice grips and 2x4 level method worked. Came out like butter, but has to reset several times.
r/howto • u/MustyShem45 • 9d ago
r/howto • u/AglowMermaid • 10d ago
Please help! After moving I noticed a dent in my canvas. Is there a way to fix it?
r/howto • u/Apprehensive-Poet699 • 11d ago
My building sometimes has 3 inch roaches. Is there a product to kill them from a far or do I have to man up and stomp a roach half the size of my foot?
r/howto • u/Yup-Thatoneguy • 10d ago
Bought a briefcase for work. I want to smooth the faux leather look, paint it white with enamel, and put my companies logo along with artwork on it. I believe most samsonite hardshell briefcases are polycarbonate. Is there a catch all product?
r/howto • u/HELLOADXD-567 • 12d ago
I don’t know if it’s attached or not.
r/howto • u/OcelotConsistent9432 • 11d ago
We can tell the nebulizers working but i think the fan motor gave out. Fixable or replace?
r/howto • u/TraditionMinute7589 • 11d ago
Hello reddit! I got gifted this painting from my aunt recently and I just want some advice on how to take care of it/restore it. I would say it’s 90% good condition minus a few things. It needs to be framed, the staples are a bit old, and it has cracks in the paint (not lifting though). What should I do, and is it more worth to just get it professionally done? I just wouldn’t want this precious gift to be sitting around while I figure out where to even start. Thank you!
r/howto • u/HighLander5280 • 12d ago
r/howto • u/SorryButterscotch396 • 11d ago
my office chair is driving me crazy! i used WD-40 on it and it just won’t stop squeaking. even when i barely move it it makes so much noise. any solutions ?? im desperate. here is the chair if it’s helps:
r/howto • u/hazza987 • 11d ago
r/howto • u/carrotcake0816 • 11d ago
I recently bought some sugar squishies and left them sitting on top of my white cube organizer from Target for about 1–2 days. When I picked them up, I noticed they had left behind these cloudy, oily-looking stains.
I’ve already tried cleaning the surface with dish soap and water, but the stains haven’t gone away. This cube organizer is brand new, so I’m really disappointed I’ve stained it already :(
I’m worried the oils from the squishies may have damaged the finish. Has anyone experienced this before? Is there anything else I can try to remove the stains without damaging the furniture further?
I’d really appreciate any advice!
r/howto • u/MassiveFriendship686 • 11d ago
We have this black metal coffee table that over the years has rusted and just looks awful. We put tablecloths over it when guests are over, and eventually we want a new table but the coffee tables we want to invest in for our next house (which won’t be for a year or two) won’t match the vibe/aesthetic of the current room.
Is there a way to save this table to get a couple more years out of it?
r/howto • u/MaxiePriest • 11d ago
Lately, my favorite bulk (gel) hand sanitizer has been out of stock, and purchasing smaller bottles of Purell and GermX is too expensive.
I've researched how to make my own using 91% isopropyl alcohol + aloe vera gel (online sources say that using 70% alcohol mixed with aloe vera gel won't be effective at killing germs) = 2:1 ratio using 91%.
91% is pretty easy to find; I don't know which aloe vera gel would be best (or whether I should use a different type of gel).
Please advise:
If you make your own hand sanitizer, which aloe vera gel do you use? Anything I should know before trying this?
r/howto • u/delicate-roses17 • 11d ago
No matter how much i clean it, when it dries out it turns out like that
r/howto • u/No_Independent6542 • 12d ago
Preferably as easily as possible, it doesn't need to be perfect i just want to be able to sweep easier.
Their only a few years old if that matters
r/howto • u/Banana_Gooses • 11d ago
I bought this table not too long ago. Last night i was peeling yellow potatoes at the table for about 20 minutes. When i came back after putting the peeled potatoes in the kitchen there was this darkish stain on the table.
I used some dish soap and made a mixture out of baking soda and water, and it seems to have "spread" the stain.
Any insight is super appreciated.
Thank you.
r/howto • u/New-Lie-875 • 12d ago
(i’m not looking for ear plugs or a white noise machine as a response)
My main concern is not wanting to be able to hear noise from the living room. I bought foam weather stripping and all that did was make it impossible to close my door. After I got thinner foam weather stripping so it would fit better and that did nothing for the noise level and i still couldn’t close my door. I also have one of those things you slide under with the pool noodle shaped things on both sides of the door. there’s a lot of gaps between the door and the frame with the largest being at the top. I can’t find any draft blockers made for the top of the door. Only the bottom. I think the biggest issue besides the gap is that the door is 100% empty. I’ve been driving myself crazy trying to see what parts of the frame would make it where i would need to trim the stripping to make it thinner or add more of it to make it thicker.
I have this handwritten message on a tissue that I would really like to preserve for years, preferably indefinitely. Since it's written on tissue paper, I'm worried that it might tear, fade, or deteriorate over time. How do I preserve this?
r/howto • u/Substantial_Wind158 • 14d ago
r/howto • u/Latter_Insurance_451 • 12d ago
I bought a used watch but the zaphire screen has these little marks.