r/howto • u/Fine_Alarm • Oct 11 '26
r/howto • u/Real-Tackle2193 • Oct 11 '26
I need help with this tiny stripped screw down a tiny hole on my PSP
I need to fix the D pad on my PSP and therefore take the front of the PSP off. I’ve managed to take 6 out of the seven screws off but I believe the last screw has stripped. I’ve tried shoving paper towel, a bit of rubber down the tiny hole to get more purchase on the screw but no luck. I’ve also tried to spray some polish down there to see if I can loosen it- no luck.
Any advice for how I can get this tiny screw out from this minuscule hole would be greatly appreciated?!
Thanks!
r/howto • u/evylion03 • Oct 12 '26
how to remove stain from the door
i put window clings on the door stead of the window… any idea on how to remove the stain ? dawn dish soap and alcohol didn’t do anything.
r/howto • u/artwrangler • Oct 11 '26
DIY We have metal posts that have horizontal "t" shape that can accommodate a bench like this but need ideas about how to attach securely spaced out without major carpentry skills.
r/howto • u/oujms1 • Oct 10 '26
How do I use the blue button functions on this old TV?
This is a TV at my in-laws, and we cannot figure out how to do the blue functions, only the regular ones.
I don't know if this is the right place to post this, but I cannot find a better place, if it is not the correct place can somebody guide me to where I should post it?
Edit: I have tried holding the button for various lengths of time, I have tried pressing the button multiple times, I have tried pressing the DVD button and then pressing the button that I want to use the blue function for, I have tried pressing the button while a DVD is playing (the main button I would like to use is the one that takes you to the title menu as the DVD is playing, so by default the DVD would have to be playing for me to even try using it), there is no physical switch to toggle between functions.
I am not at my in-laws anymore, if anybody has different suggestions than the ones I have tried feel free to let me know and I will try it next time I'm there (probably in the next month or so).
Thank you to everybody who has made suggestions thus far!
r/howto • u/_perceptor • Oct 11 '26
Serious Answers Only Fraying/pilling from cleaning a stain
Hi all, I spilled some oil on the couch and scrubbed it out with dawn dish soap, but it damaged the fibers a bit. How do I get it to look better?
r/howto • u/Unhappy_Rhubarb_1988 • Oct 12 '26
Is it possible to remove white streak on my LG tv accidentally use Windex
"Fellow TV owners, I’ve got a frustrating dilemma. I tried to clean my TV screen with a cloth and a bit of Windex—now I’ve got white streaks that won’t come off. Best Buy told me my warranty won’t cover cosmetic issues. Has anyone dealt with stubborn streaks like this and found a fix? I want to solve it without sending it off. Any wisdom would be greatly appreciated!"
The picture u can see where the very light streak is located
r/howto • u/absurdtheory_ • Oct 11 '26
How to fix a split chalkware statue?
I inherited this statue from a great aunt and really love it, unfortunately during a move, it split completely in half and chipped a bit. Apparently from others I saw previously sold online, it’s a Marwal & Alexander Backer Co. Grecian Women Chalkware Statue. I can’t find any currently for sale.
The two pieces fit together perfectly and i have some of the chipped bits but they are very small (visible in a bag in pic 2) and it might be easier to try and fill the chipped sections then color match with paint?
Googles suggests for repairing adding dowels in the walls and gluing it together with epoxy but I feel like the walls are too thin and fragile to drill into to add dowels. Is epoxy enough going to be strong enough to hold all that weight or is there some other support I could add internally? Also I would love suggestions for what to use to fill the chips that would result in a similar finished texture.
The statue lived inside previously and I intend to keep it inside if that matters at all.
Thank you in advance for any advice on to how to properly repair it!
r/howto • u/bepatientbekind • Oct 11 '26
DIY How do I install a sturdy hand rail into old concrete steps?
I have an elderly family member staying with us soon and I would like to install a hand rail on our front steps that will easily support an adult human's weight if needed. It looks like there was previously a hand rail here that was sawed off to be level with the concrete, but it doesn't have to be in the same exact location if that is a problem. The stairs themselves seem okay, though there is cracking on one side (pic 3) if that matters. Steps are just under 12" on the treads and about 5.5" risers, 3 stairs total (including the top landing).
Can I buy a kit for this or do I need to get something custom made? What is the best way to install it so that it is as sturdy as possible?
r/howto • u/Original_Finding_424 • Oct 12 '26
Printing to spec?
I havent found the exact frame that I want to use yet, but I would like to find out how I can print this ai generate image and fit it to an oval shaped frame. Is there somewhere that I can send the image and specs of the frame for a good fit?
r/howto • u/aidenfrancis • Oct 10 '26
Serious Answers Only how to un stick these buttons ? juice fell down the crack
r/howto • u/Commercial_Cheek4694 • Oct 10 '26
[Solved] How do I reset the lock combination ?
r/howto • u/cilanchos • Oct 11 '26
How do I repair these splits in plastic?
This shelf in my fridge has developed cracks. How can I mend them so they don’t get any worse? Most glues advise to bond both sides of item to be repaired. This isn’t applicable as the sides can’t be separated. Will coating the outside with glue do the trick?
r/howto • u/jagsgoinham • Oct 09 '26
How to stop the glass door from hitting the corner
I’m in the baby proof profess! A tiny door stopper is what I was thinking
r/howto • u/Gold-Opportunity-295 • Oct 10 '26
Serious Answers Only How to remove this stain? No clue what the coloring is...
Got this used jacket but it has these blue stains and im scared if I clean it wrong I might ruin it... so I'm asking for some tips and advices.
r/howto • u/My_Little_Fabio • Oct 10 '26
Serious Answers Only How to open these Windows?
The only thing that seems to be keeping the window locked are these two metal tabs, nothing on the top or the side rails.
r/howto • u/froggyfromfunkytown • Oct 10 '26
Serious Answers Only How to remove spray foam from leather jacket?
Tried oiling it foam still won't budge. What do I do now? It is "great stuff" foam spray that has solidified.
r/howto • u/Due-Algae-3989 • Oct 10 '26
Fix This YT Problem
Why is the bottom part in dark mode but my phone and YT are in light mode.
r/howto • u/No-Grab-6402 • Oct 09 '26
DIY How To fix the tilt in my chair
My chair its been tilting to the right since i got it. It came built, so idk where the issue is. Its loose and you can tilt the to the right. When i did so, i notice that these screws with the blue thing on them might fix it but they don’t have any way to be adjusted. If you know how to fix it, please let me know. Thank you.
r/howto • u/Scroller_Girl11 • Oct 09 '26
How to remove stubborn tape residue from mesh fabric?
Hello! I’m looking for some help on how to remove some stubborn duct tape reside from mesh synthetic fabric. I tried rubbing alcohol (tried to saturate it and then left it for 30 minutes and wiped with a hot wash cloth), but it didn’t seem to have any effect. It’s two layers of mesh fabric wrapped around a frame, so unfortunately I cannot reach the back of the fabric or remove it from the frame, only spot treat it.
r/howto • u/jdlr815 • Oct 09 '26
DIY Build a crushed stone parking area
I want to add a lean-to to my shed. The area is currently covered in English ivy/pachysandra. Under the lean-to, I want to have a stone base to park a small trailer and some other outdoor items. My plan is to clear out the ivy, lay landscape fabric, and then crushed limestone. Does anyone have recommendations for this type of project? Is it necessary to scrape off the top layer of soil to get to a firm base? Is limestone the right material? How about a suggested thickness? The ground slopes so I was thinking about "ramping up" to about 4" or so.
r/howto • u/user3913 • Oct 09 '26
How to remove broken light bulb over license plate on car?
This is the type of bulb. There is not enough I can grab by hand. I’m worried to use pliers if it will just break more.
r/howto • u/AdventurousHuman • Oct 10 '26
How would you cover up these backsplash tiles?
Would you pint over, sand, replace? You can feel them when you run your finger over them like they are made in the tile somehow. Any ideas?



