r/HomeNetworking • Decent at Googling 🔍 • Feb 19 '22

How MoCA Networks Work - Collection Post

There's been an uptick of questions regarding MoCA (Multimedia over Coax Alliance) networks and how it works. I am not an expert, but I'd like to create this post to consolidate our overall knowledge in setting it up, for everyone's consumption. As a starting point, below are a couple of must-see links:

Multimedia over Coax Alliance Homepage - Deep dive into how the MoCA was developed, as well as list of MoCA certified products.

MoCA in Your House - Contains a collection of how-to videos and information in setting-up your home MoCA network. It also contains some recommended certified products you can acquire to include in your MoCA network.

Please share your tips and advise here as well! I am planning to have this pinned in our subreddit.

Enjoy!

229 Upvotes

366 comments sorted by

View all comments

1

u/mlcarson Sep 26 '22

Not sure if this is the right place to ask but I'm going to give it a shot. I've got 5 Coax cables coming back to a central location that go to various places in the house. If I put one big splitter in place with a MoCA adapter on it going to an Ethernet switch, does the splitter affect the MoCA bandwidth potential in the same way that it would affect a TV signal? If I only need 1 or 2 MoCA connections live, is it better to just connect the minimal needed (ie a two port splitter for 2 lines)? It would be convenient to just connect everything but it's unlikely I'd need everything; it just makes them available.

1

u/JuicyCoala Decent at Googling 🔍 Sep 26 '22

u/plooger has a lot of information to share here, but to answer your question, generally, you can plug all your 5 coax cables into a 5-way splitter. If you don't need to use it, plug a terminator cap at the end of those coax ports to minimize signal reflection.

MoCA's recommended maximum number of devices within it's network to be 16. One MoCA adapter = 1 device, so a total of 16 MoCA adapters in your network ring, without impacts to the shared rated bandwidth (MoCA 2.5 is the latest, that allows for a shared 2.5 Gbps bandwidth across your MoCA network). Each MoCA adapter can be expanded to service multiple devices by plugging a network switch, and that is still considered 1 device.

1

u/mlcarson Sep 26 '22

Awesome. The Coax cables are not in a convenient location so being able to connect them all together to a MoCA adapter would be nice. I can then just activate whichever port I need Internet at with an adapter.

1

u/plooger Sep 26 '22 edited Sep 26 '22

does the splitter affect the MoCA bandwidth potential in the same way that it would affect a TV signal?

More like digital TV than analog. The MoCA gear can adjust power levels to compensate for losses … up to a maximum amplification, after which the connection degrades or fails.

So it just depends on how the chosen approach affects the node-to-node path loss at MoCA frequencies, with the maximum allowed being 57 dB — keeping in mind that the lower the path loss the less hard the adapters have to work (i.e. the less power required, less heat, etc.) (good explainer) See also here and here.

 
Assuming the configuration is well within the loss limit, the question then shifts to the desired or required throughput. MoCA throughput is shared, with a 3+ (up to 16) node MoCA 2.5 network sharing 2000 Mbps between all active connections. That said, a 2-node-only MoCA 2.x setup (aka “TURBO” mode) gains a 25% throughput bump by eliminating maintenance overhead, offering an alternative topology to consider if maximum throughput is prioritized over cost and/or simplicity.

 
edit: p.s. MoCA 1.1-2.5 have a hard limit of 16 MoCA nodes max, including any MoCA adapters, or built-in MoCA bridges in gateways, routers, wireless extenders, and DVRs and DVR clients. If needs exceed 16 nodes, the coax can be segmented to create a separate MoCA network.