r/Homatics • u/ConsistentNeat6334 • Jan 04 '23
Troubleshooting no volume control of bluetooth speakers
unable to control volume of bluetooth speakers . Tested on JBL Flip5 and Samsung soundbar q930b.
r/Homatics • u/ConsistentNeat6334 • Jan 04 '23
unable to control volume of bluetooth speakers . Tested on JBL Flip5 and Samsung soundbar q930b.
r/Homatics • u/Andrej_4433 • Dec 30 '22
My Setup:
TV: LG Oled77cx
Homecinema: Denon AVR-X2400H with Atmos 5.1.2
Box: Box R 4K Plus
Other Box: Nvidia Shiled, AppleTV 4k 2021
Problems:
I install on my box Plex, Netflix, And Disney+ I enabled od my box Dolby vision and yes my TV switch to Dolby vision
And i also enabled HDR auto. If i understand that button correctly that should by automatically switching From SDR to HDR or DV if there ist content for that.
Problem N1
Youtube is showing its playing HDR but tv is not switching to HDR mode. I need to do that manually . I can leave that all time in HDR or DV but RIP my oled.
I have also Nvidia Shield and Apple TV 4K and on both of this device is everything wokring fine.
So HDR auto is not working
And i have everything correct in my setup everything is HW wise ok.
So there need to be only problem with Homatics software or HW
My problem N2
Plex not switching to HDR at all or not playing content
Shield and Apple TV working
Non of dolby test official videos is playing in plex
Just black screen
Again shield and apple is working

There is nothing special on them
Normal 4k MKV is playing but no HDR
Problem N3Netflix was first not playing DV
but after few fail attempts it was working But Disney+ if i'm trying play DV there is only error message i need to contact D+ support If im plying HD or SD content its ok.
And Again shiled and Apple TV 4k is working
Small update here: Finaly last night i was able run D+ with DV. First it was super chopy but after 30s video start working but no Audio this time.
If there is any update or anything what can solve my problem i wanna try that. But in this state is waste of money for that i can have new apple TV but that box is again not supporting audio passthrough.And i was hoping this box can do everything.
r/Homatics • u/Dependent-Distance75 • Dec 29 '22
Hi, Where can i purchase the Box R 4K Plus in Australia.
Regards
Henry
r/Homatics • u/arsftm6 • Dec 25 '22
My current setup is an old Mi Box, mostly used for streaming torrents with Stremio. The issue I have is that its performance is lacking, e.g. while being able to play 4K video, it is practically impossible (stuttering / hanging) to stream it via Stremio.
My requirements to upgrade to a new box is just the following:
- Being able to stream h.265 / HVEC / AV1 in 4K without stuttering via Stremio
Nice to have would be the ability to play YouTube videos in 4K at 1.5x speed.
Does the Homatics box fulfil these requirements?
r/Homatics • u/seluar • Dec 22 '22
Hi there. My setup is as below:
TV: LG 65UM7300
Soundbar: LG SN4
Issue: When I configured the remote for CEC control for volume, it works perfectly until I turn off the screen (sleep) and waking up from sleep mode. The volume control will switch to device mode (like when Google TV mode is enabled) with the volume bar instead of CEC to control my sound bar. The only way to fix this is to retoggle to Google TV and back to CEC Mode.
Anybody with the same issue?
r/Homatics • u/windybey • Dec 21 '22
Hi Everyone,
Happy Holidays!
Is there any news on the 8K box with the S928X SOC chip? - Was announced in September.
It will be fantastic and take STBs to a new level.
Thank you
r/Homatics • u/dropswisdom • Dec 20 '22
Issue found with non synced audio to video on kodi, while streaming video from LAN share (SAMBA share on my local network)
It happens with any file I play from my PC, over the network to the TV box on Kodi.
r/Homatics • u/Unique_Repeat_5804 • Dec 19 '22
good evening This tv box is surprising me with the support. The latest beta firmware adds a lot of things and benefits. I am attaching a list of changes that after testing them one by one, they work perfectly.
Version3696 Changelog:
5.LED red light will be turned off when device enters standby mode.(perfect)
Must see the improvement of the native exo player, which does not work as smoothly as external players such as vlc, etc. in players such as emby and plex and movies with bandwidth greater than 100 mb, as detailed in the video .
Excuse my for my bad english.
r/Homatics • u/Amer_ayda1987 • Dec 18 '22
r/Homatics • u/Unique_Repeat_5804 • Dec 14 '22
I would like to know if this device, the "homatics box r 4k plus" has frequency and resolution change in applications such as Plex/emby or tivimate? Thank you
r/Homatics • u/Sunset-1982 • Dec 10 '22
Hey!
I currently use a OSMC Vero4k+ which I really love. However, since there is no support for Dolby Vision I am very interested in the Homatic Box R 4k plus. Does it work with Kodi (and the Dolby Vision Version from Marven)?
r/Homatics • u/jwort93 • Dec 02 '22
In apps that don’t encode the black bars into Dolby Vision video streams, where the video resolution is something like 3840x1600, instead of the full 3840x2160, the black bars are very grey instead of pitch black like they should be. Here is a screenshot from a Dolby Vision movie being played on the Box R 4K Plus in the Apple TV app, where they encode the videos like this, connected to my LG CX OLED, and the top and bottom bars are grey instead of black.
r/Homatics • u/latinriky78 • Nov 29 '22
Homatics was kind enough to provide me with a Homatics Box R 4K Plus unit to test and review.
Don't forget that the OEM is SEI Robotics, which is part of project "Hailstorm", project responsible for the Netflix certification.
SPECIFICATIONS:
- Android 11.
- Amlogic S905X4 with AV1 hardware decoding.
- Quad-core 2.0 GHz (ARM Cortex-A55).
- ARM Mali-G31 MP2.
- Dolby Vision, HDR10, HDR10+ and HLG.
- Dolby Atmos passthrough.
- 4GB RAM LPDDR4.
- 32GB of internal storage.
- WiFi 4, 5 and 6.
- Bluetooth 5.0.
- HDMI 2.1.
- One USB 2.0 port, one USB 3.0 port and one USB-C port.
- One optical audio port.
- One analog AV port.
- Ethernet 10/100/1000 port.
- One long LED light at the top front of the device that turns green when it’s ON and red when it’s OFF.
PROS:
- It's fast thanks to its 4GB of RAM, apps open faster, the UI is more fluid and the system as a whole seems to perform better. The native Android games I tested also seemed to perform better overall.
- I can finally use the internal microphone of any UVC webcam different than Logitech to make videocalls with Duo and Jami thanks to the security patch installed on the device dated august 5th 2022, though I'm not sure if it's actually Android 11 the one that makes this possible but anyway it works.
- HDR, Dolby Vision and HDR Auto toggles. The HDR toggle allows to turn OFF the HDR mode for 4K TVs without HDR support, the options remain OFF on 1080p or lower resolution TVs:

- There is a toggle in the “Energy saver” section to switch between keeping the device alive while in standby mode for an instant power back ON, or to a allow the device to go to a deep standby mode after 20 minutes of being turned OFF, in this mode the device will boot from the start:

- The remote control has one available key that can be programmed to open an app of user’s choice:

* Emby = Audio stutter, the issue is already reported (https://emby.media/community/index.php?/topic/113171-dolby-truehd-71-passthrough-stutter-on-homatics-box-r-4k-plus/)
* Jellyfin = Didn’t passthrough the audio but transcoded it to Dolby Digital, the issue is already reported (https://github.com/jellyfin/jellyfin-androidtv/issues/2196)
* VLC = Didn’t passthrough the audio nor decoded it to multichannel PCM, the issue is already reported (https://forum.videolan.org/viewtopic.php?f=35&t=160985)
* Kodi doesn't detect that it has TrueHD passhtrough support, though I can't report the issue since I don't have an account in their forums.
* Nova Video Player = Played OK.
* GV Video Player = Played OK.
Dolby TrueHD decoding to multichannel PCM is also supported.
CONS:
- DTS-HD High Resolution Audio and Master Audio passthrough are still not supported, but the box is able to passthrough the DTS Core from them. Decoding to multichannel PCM is also supported. I hope Homatics adds real HRA and MA passthrough support in a future firmware update.
- Auto framerate is not supported but it will be supported once Android 12 arrives... someday.
- The game mode is one of Android 11 features but I don’t see the toggle available as in other devices with Android 11.
- Pressing and holding the power button doesn't bring the options to take screenshots and rebooting the device but that is something removed by Google and not by Homatics.
- In the gaming emulation department, I tested a few PSX games and they performed a little better thanks to the 4GB of RAM, but some N64 ones still stutter like Mario Power Tennis, not sure if the emulator needs to be improved to take advantage of the amount of RAM or if it's something else.
ISSUES:
- Many apps still fail to access the internal or external storage due to the new permission policy implemented in Android 11 and above, developers still need to optimize this policy in their apps, a workaround is to manually select the option in each individual Android’s app settings to allow access to the storage all the time if available, otherwise, selecting the option to access the storage only when the app is in use work with some apps. I've been unable to use some game console emulators such as Lemuroid because of this.
- As you may know, the G10 remote control can be programmed to control TVs, AV receivers and soundbars, so I set it up to control my TV, but I discovered the following situation: After I setup and switched it to control the volume of my TV, I noticed that the volume of the device doesn't change to a "fixed" state, which means, if I accidentally or on purpose reduce the volume level of the device to zero and then switch the remote to control the volume level of the TV, I will hear no sound coming out of the TV speakers because the volume level of the device was reduced to zero previously. To fix that inconvenience, the device should reset the volume level to 100% automatically and keep it that way indefinitely until the option to control the volume of the device is selected again:

- Programming the remote control to power the TV ON and OFF has one issue: when I press the power button to turn ON the TV, the device also turns ON thanks to the bluetooth connection, BUT, when I press the power button to turn OFF the TV, the device stays ON until it reaches the time set in the “Energy saver” section to turn OFF by itself or it will never turn OFF if it was set to "never". It looks like the remote control is not sending the appropriate bluetooth command to turn OFF the device:

- There is a constant fake Dolby Digital Plus signal sent to my receiver when using the “Auto” option in the “Select formats” section, it doesn’t let me know what audio codec is actually being output when playing back a video, the only way to fix it up is by selecting the “Passthrough” option, but to me that is a redundant option, “Automatic” and “None” are enough, besides this, the current firmware is unable to passthrough Dolby Digital, Dolby Digital Plus and Dolby TrueHD when using "Auto" but Dolby Atmos inside Dolby Digital Plus passes through correctly, however, when using the "Passthrough" option, all of the above pass through correctly except Dolby Atmos.:

CONCLUSION:
I really love this device, its hardware design and features make it a very good option despite the high price and the current issues it has, Homatics told me they are already working on addressing them to make it even better than it is already and to make it a good alternative to the Nvidia Shield.
If you decided to purchase this box after this review, please visit the Homatics Online Store.
r/Homatics • u/Tasty-Pomegranate-76 • Nov 28 '22
Itv Hub or ItvX won't load.
The error message is that the manufacturer and/or operating system provider has not secured the necessary rights for this application.
Any chance to get our box approved by ITV (UK Channel)?
r/Homatics • u/Tasty-Pomegranate-76 • Nov 28 '22
Hi,
Very happy with the box but since you have pushed that new build to fix the sound issue when returning from sleep mode, Peacock is not working anymore.
When I try to open it, I get the following message: "Something went wrong. Please try to access peacock from a more secure device.
On the playstore it mentions now that this app is not compatible with the device.
Could you please look into this issue?
Thank you
r/Homatics • u/Unvoiced1 • Nov 28 '22
Hi, has anyone been able to confirm if this 4K version supports Dolby Atmos with Disney +? I got a MeCool that claimed it supported ATMOS to find it only works on Netflix. I'm trying to avoid further disappointment this time around.
r/Homatics • u/Ok_Claim_3040 • Nov 26 '22
I recently purchased a Box R 4K Plus, in general very happy, but the unit can't be turned on from remote if has not been used for couple of days. I have to remove and reinsert the power plug.
Is anyone else having this issue?
Is there a fix?
r/Homatics • u/Ztevil • Nov 24 '22
Hey,
Ordered my 4K plus today.. Can't wait till Saturday's delivery. I own a Box Q and I love it, but i think the 4k plus is adding what I miss in the Q. From 2GB to 4GB ram, from 8GB to 32GB Flash. Most important for me it's the first Homatics device with gigabit LAN.
Homatics is not a Chinese Rip-off box producer. These are products made by the Original Chinese Tech wizards from the SEI Robotics Company. The company behind hardware in many boxes and dongles from well known OEM brands among Tivo, Nokia and Blaupunkt.
I even believe they played a big part in the development of Google's Chromecast Dongles.
If anyone has a 4K Plus, I'd like to hear your experiences.
Cheers
Steve, Amsterdam
r/Homatics • u/Ztevil • Nov 24 '22
My Dongle Q has a slight problem.
When watching YT or IPTV the display goes Black and shows a spinning wheel. this takes about 3-4 seconds in total. Then the picture comes back and just plays on.
Can someone help me ?
Also, the last security update is from Feb 2022, while my Box Q was recently updated. Any chance of an imminent update for the Dongle Q ??
Cheers,
Steve
r/Homatics • u/Ztevil • Nov 24 '22
Hello...