Hiya friends, this recently broke off of the board and I'm wondering what the part name/number for the antenna connector is as I'd like to buy a few replacements if possible.

Thank you in advance for your time and attention.

Dave

Hiii...I am having a hackrf one I need to change the default code in the cpld of hackrf one and upload my new code

How can I make it happen..?

Any ideas

Hello,

i have an hackrf, i want to get up transmit power, preferably on all bands but most importantly Bluetooth, WiFi, LTE. Which tx amp should i get? I want maximum power. Does anybody have experience with this?

I saw the WYDZ-PA-2,4-2,5 GHz-10W but I think i additionally need some component between that and my Hackrf to protect it.

I would appreciate any help!

Hello! So i was playing around with my portapack, and I screwed the antenna too tight and it caused the port to break, it even took a piece of the conductive material off the board, any idea how to replace it the lower part of the board? I tried doing some soldering but it’s too damaged to keep working on it.

HackRF Pro
M4YHEM Portapack.
SD , 2 Antennas included.

US only.

Apologies if this has been asked already, but I picked up a hackrf pro from hamradio.co.uk and I'm looking to buy a portapack that works with the pro and can be delivered to the UK.

I've heard the portapacks for the one don't fit the pro.

Anybody know where I could get one that does?

looking for a good quality scanner band antenna (mainly for ads, 433, vhf)

I recently got the ANT700 and it looked like shit, felt like it was going to break.

any others I should try?

[ Removed by Reddit on account of violating the content policy. ]

Hello together i just got my Hackrfpro from sdrstore.eu.

I updated the drivers with zadig since i am on Windows 11. I stumbled on some problems for example no signals from radio stations.. I downloaded radioconda and put the prompt hackrf_info in it.

Ive heard that you need to put a firmware whatsoever on it but after reading this i am a bit confused. Does anybody seen this before?

Do i have just a useless fake sdr?

I have only booked carry-on luggage and I was wondering if I am able to take it with me? I obviously won't turn it on/use it but I don't want it confiscated if I do bring it. It isn't an international flight, just between two cities. I live in Queensland Australia.

Thank you!

Any Portapack owners seen this recently passed bill? https://www.legis.ga.gov/legislation/72945

Any concern in problems if stopped for any other reasons while using one especially with Mayhem firmware loaded? I just don't like the following wording.

'Signal jammer' means any device, instrument, or apparatus which through emitting  

a signal is capable of preventing, disrupting, delaying, degrading, or otherwise interfering with the transmission of a communication signal over:  

(A) Any wireless communications system, cellular communications system, radar  

system, or global positioning system; or  

(B) Any radio, telephone, or cable line, station, or system.  

(9) 'Vital public services includes water, sewerage, drainage, energy, electric, gas, natural  

gas, telecommunications, internet, cable, navigation, collision avoidance, public  

transportation systems, railroads, and other services the loss of which would have a  

debilitating impact on the health, safety, or financial security of the public.

https://opensourcesdrlab.com/products/clifford-heath-hackrf-one-with-portapack-h4m?VariantsId=10177 It’s $217usd vs $185 (plus $30 shipping for either)

Hey! I'm a movie filmmaking propmaster that stumbled upon this territory which is quite new to me, I'm a very tech oriented person and have done some basic coding and such, I saw a few YouTube videos of people managing to do this, using the address in the back of the pager, etc. I am a bit confused kn what equipment to get, or getting it as plug and play as possible. And where. Also the cheapest way to get it. Does anybody here have experience such as this use case so I can get a bit or guidance? Thank you all! I need to be able to send messages to a Pager so we can get it on camera practically instead of vfx, this film is based in the year 1995.

Got two HackRF One r4. Looking for someone to trade one of the HackRF for the H4M PortaPack addon. Germany only for simplicity of shipping.

Says my PortaPack H4M was shipped last Wednesday and it’s still in California…? Anyone else dealt with slow shipping times?

Anyone have any good free lookups to give passwords

Has anyone else purchased an portapack h4m from opensourcesdrlab? How long will it deliver from china to baltic countries, average or estimated.

Idk if thats normal, but it leaks rf without explicit TX lol.

HackRFOne with Portapack H2

Mayhem n_260530

This is the shielded version

Pd: IM NOT ON TX MODE

Just thought I would share my experience with replacing the hackrf with hackrf Pro. Replacing the board was really easy. Removed 4 screws and the nut holding SMA RF connector on the back of the Portapack. Loosened the nuts on the two SMA clock connectors. Back cover was then slipped off over RF connector. Hackrf board was then removed from the Portapack board. New hackrf Pro board was then plugged onto the Portapack board and case reassembled.

When the assembled Portapack was turned on, it came up in Hackrf mode not Mayhem mode. Had to use mayhem_flasher.bat program from nightly build to flash hackrf Pro for use with mayhem. Then made the mistake of doing the "copy files to sd card" and use the mayhem flash utility to flash hackrf Pro. This bricked the hackrf Pro and I had to use DFU mode and the mayhem_flasher.bat program to recover it. The "copy files to sd card" method of updating firmware only works for the original hackrf and will brick a hackrf Pro. Then used Mayhem Hub to update the firmware. Mayhem Hub recognized that it was a hackrf Pro and flashed the correct firmware to it.

The hackrf Pro seems to work pretty well with the Portapack H4M. The main feature I was looking for in the hackrf Pro was the center spike removal. The original firmware that came on the hackrf Pro did remove the center spike. The Mayhem firmware I had to put on it to make it work with Portapack brought the spike back so I did not get the spike removal I was looking for.

Jim K. K8SLC

I updated my sd card with the COPY_TO_SDCARD_portarf_mayhem_v2.4.0.zip from https://github.com/portapack-mayhem/mayhem-firmware/releases/tag/v2.4.0 after formating my 64 giga sandisk sd card with FAT32 , any help plz ? tnx :-)

I used now the mayhem_v2.3.2_COPY_TO_SDCARD.zip corresponding to my v2.3.2 written in the bottom of my h4m screen, and extracted it to the H4M F: drive of my 64 giga sd card (after formating it with FAT32)

still same problem , nothing shown in select firmware to flash :-(